Heater Control Raspberry Pi

Heater Control based on Raspberry Pi with GPIO. Usage for smart home and controlling the radiator . You can also use it with openHAB 2 (https://www.openhab.org)

Prerquirements:

Hardware:

• Raspberry Pi Zero WH
• Eberle TS+ 5.11 Thermoantrieb stromlos geschlossen thermisch
• 4 Kanal Relais 5V/230V Raspberry Pi Optokoppler Modul Channel Relay Arduino
• Digitales Temperatursensor Modul für Arduino Raspberry Pi DS18B20 SE08006

Software: raspbian gpio -> https://github.com/WiringPi/WiringPi

Usage: edit heater_control.cpp and change "ifstream ifs ("/sys/bus/w1/devices/28-030597790d9b/w1_slave", ifstream::in);" to your thermometer ID. compile with "clear; rm -frv gpio_control.o; g++ -g -fPIC -Wall -c gpio_control.cpp; rm -frv heater_control ;g++ -g -fPIC heater_control.cpp -o heater_control gpio_control.o -lwiringPi -static-libstdc++; date" run "./heater_control " for example "./heater_control 22.214 26". You can get the phy. pin port to the corresponding wiringPi port by using the command "gpio readall" .