OPlus Extras

A configurable parts application for OnePlus & Realme devices.

About the project:

OPlusExtras is a device specifc parts application, aimed at addressing the challenge of maintaining multiple devices with varying feature sets. One of the key advantages of OPlusExtras is its ability to configure node paths, doze sensor names, and enable/disable features via runtime resource overlay (RRO) packages in the common (OPlusExtraResCommon) and device-specific (OPlusExtrasResTarget) trees. This approach ensures that the application can be run on multiple devices, even if they do not support the same features. With OPlusExtras, users can conveniently enable or disable features on a per-device basis without having to remove code for unsupported features!

Current features:

Category	Feature	Description	Reference commits
Alert slider	Use slider for	Configure what the Alert slider does (Notification, Flashlight, Brightness, Rotation, Ringer, Notification and ringer, Extra Dim, Night Light, Refresh rate & Colorspace).	N/A
	Top/Mid/Bottom position	Selects what each position of the alert slider is used for in accordance with what Use slider for is set to.	N/A
CPU	Touchboost	Boost CPU frequency on touchscreen input on qcom devices.	WIP
Display	High brightness mode	Enable peak luminance.	N/A
	Antiflicker	Prevent extensive flickering and reduce eye strain in low light conditions.	N/A
	Kernel color calibration	Calibrate display via Kcal on qcom devices (red, green, blue, saturation, hue, contrast, value).	Commit 1/1
	Keep PCC	Keeps panel color correction enabled when the UDFPS circle is pressed.	Commit 1/1
	Ambient display gestures	Raise2wake, Raise2pulse & pull-from-pocket to pulse.	N/A
Filesystem	Fsync	Force disable filesystem syncing for increased performance at the risk of data loss in the event of a system crash.	Commit 1/3 Commit 2/3 Commit 3/3
GPU	Adrenoboost	Ramp up GPU clockspeed faster (off, light, medium, aggressive) on qcom devices.	WIP
Power	Powershare	Reverse wireless charging.	N/A
	Quite mode	Disable the fan of the OEM wireless charger and limit wireless charging speeds.	N/A
Touchscreen	Touch gestures	Screen-Off touch gestures with various actions (utilizes the lineage touch hidl).	N/A
	Edge limit	Disable the touchpanels edge limit.	N/A
	High touch polling rate	Increase touchscreen polling rate.	N/A
Ui-Bench	Jitter	Calculate rendering jitter.	N/A
USB	USB-OTG	Force enable USB on-the-go mode.	N/A
	USB 2.0 fast charge	Force fast charging of up to 900mA while connected to a USB 2.0 port with mtp enabled.	Commit 1/1
Vibrator	System strength	Define the strength of the vibration motor.	Commit 1/1

Including OPlusExtras during compilation:

Have the application included during compilation by adding the following to device.mk or common.mk

# OPlusExtras
PRODUCT_PACKAGES += \   
    OPlusExtras \
    tri-state-key-calibrate (if device supports tri-state alert slider)

If you install OPlusExtras as a user-app, it will not be injected into Settings via ia. Instead, it needs to be included as privleged app in /system_ext to appear as a preference in the main activity of the Settings application above the "About phone" and "System" preferences at the bottom.

How-to configure OPlusExtras features:

By default, the application appears empty except for the "UI Bench" category, unless it is configured. This approach not only reduces the need for overlaying but also prevents accidental activation or configuration of features on unsupported devices from the application's resources.

Notable files

• res/values/supported_features_config.xml: Allows for features to be shown or hidden by keeping or removing the corresponding preference during onCreatePreferences and controls whether some services start or not. link
• res/values/node_paths_config.xml: Set sysfs/procfs node paths for the corresponding features. link
• res/values/doze_sensors_config.xml: Defines the sensors used for ambient display gestures. link
• res/values/touch_gestures_config.xml: Set the default actions for off-screen touch gestures. link
• res/values/alert_slider_config.xml: Set the default mode/action order of the alert slider. link

Setting up the RRO overlay packages

The following examples will be shown as target. You can replace "target" with "common" for the common config.

• The RRO package structure:

OPlusExtrasResTarget (Target or Common)
├── Android.bp
├── AndroidManifest.xml
└── res
    ├── drawable
    │   └── easteregg.xml (if applicable)
    └── values
        ├── supported_features_config.xml
        ├── node_paths_config.xml
        ├── doze_sensors_config.xml
        ├── alert_slider_config.xml
        ├── touch_gestures_config.xml
        └── strings.xml (if applicable)

• Contents of Android.bp:

//
// Copyright (C) 2023 The Evolution X Project
// SPDX-License-Identifier: Apache-2.0
//

runtime_resource_overlay {
    name: "OPlusExtrasResTarget",
    device_specific: true,
}

• Contents of AndroidManifest.xml:

<?xml version="1.0" encoding="utf-8"?>
<!--
     Copyright (C) 2023 The Evolution X Project
     SPDX-License-Identifier: Apache-2.0
-->
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="android.overlay.OPlusExtras.target">

    <overlay
        android:isStatic="true"
        android:priority="350"
        android:targetPackage="org.evolution.oplus.OPlusExtras" />
</manifest>

• Including the RRO package:

Add the RRO package to device/manufacture_name/codename/overlay-evolution/

Have the RRO package included during compilation by adding the following to device.mk or common.mk

# Overlays
PRODUCT_PACKAGES += \
    OPlusExtrasResTarget