This is a prototype implementation and is currently not intended for use in production.
This is a P4 implementation of a SCION border router. It comes with several control plane applications and services.
A blog on this implementation can be found on our website: Future internet at terabit speeds: SCION in P4
Start by initialising the git submodules:
git submodule update --init --recursive
Compile the P4 code with the build script from the SDE (optionally, use P4FLAGS="-Xp4c=--parser-bandwidth-opt" to optimise the parser):
./p4_build.sh p4src/scion.p4
Make sure that the PORT_CPU constant in scion.p4 matches with the port that will be used later to receive packets on for processing the one-hop paths in the control plane.
By default support for both IPv4 and IPv6 is enabled. This can be disable by using the flag -DDISABLE_IPV4 or -DDISABLE_IPV6 respectively. Note that the flags cannot be used at the same time.
Follow the instructions in controller/README.md to prepare the control plane applications and services.
Follow the instructions in scion-patch/README.md to add the functionality to the SCION code to register the generated hop fields.
Run the P4 code as follows:
$SDE/run_switchd.sh -p scion
In example_setup/README.md, an explanation can be found to run the P4 implementation using the Tofino model and two VMs.
Currently the following features are not yet provided:
- Peering connections
- SCMP support to communicate failures between border routers
- Mixing of IPv4 and IPv6
- Support to process EPIC and COLIBRI paths
- Joeri de Ruiter, SIDN Labs
- Caspar Schutijser, SIDN Labs
- Robin Wehner, NetSys Lab OvGU Magdeburg
This project is distributed under the 3-Clause BSD License, see LICENSE.