doc: Updating to newer generated man pages

Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com>

docs/man/man8/openSeaChest_Basics.8

@@ -1,15 +1,15 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH VERSION "8" "December 2023" "Version Info for openSeaChest_Basics:" "System Administration Utilities"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.1.
+.TH OPENSEACHEST_BASICS "1" "May 2024" "openSeaChest_Basics ==========================================================================================" "User Commands"
 .SH NAME
-Version \- =drive utilities
+openSeaChest_Basics \- manual page for openSeaChest_Basics ==========================================================================================
 .SH DESCRIPTION
 ==========================================================================================
 .IP
 openSeaChest_Basics \- openSeaChest drive utilities \- NVMe Enabled
-Copyright (c) 2014\-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
-openSeaChest_Basics Version: 3.5.4\-6_2_0 X86_64
-Build Date: Dec  1 2023
-Today: Fri Dec  1 15:18:13 2023        User: current user
+Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
+openSeaChest_Basics Version: 3.6.1\-7_1_0 X86_64
+Build Date: May  6 2024
+Today: Mon May  6 12:10:34 2024        User: current user
 .PP
 ==========================================================================================
 Usage
@@ -121,12 +121,6 @@ Using this option will force the current drive to
 be treated as a SCSI drive. Only SCSI commands will
 be used to talk to the drive.
 .HP
-\fB\-\-forceNVME\fR
-.IP
-Using this option will force the current drive to
-be treated as a NVME drive. Only NVME commands will
-be used to talk to the drive.
-.HP
 \fB\-h\fR, \fB\-\-help\fR
 .IP
 Show utility options and example usage (this output you see now)
@@ -566,15 +560,36 @@ Use one of these options to specify a range to trim
 or unmap on a drive. A starting point must be specified
 with the \fB\-\-trim\fR/\-\-unmapRange option.
 .IP
-Utility Version: 3.5.4
+openSeaChest_Basics \- openSeaChest drive utilities \- NVMe Enabled
+Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
+openSeaChest_Basics Version: 3.6.1\-7_1_0 X86_64
+Build Date: May  6 2024
+Today: Mon May  6 12:10:34 2024        User: current user
+.PP
+==========================================================================================
+Version Info for openSeaChest_Basics:
+.IP
+Utility Version: 3.6.1
 opensea\-common Version: 2.0.0
-opensea\-transport Version: 6.2.0
-opensea\-operations Version: 5.1.1
-Build Date: Dec  1 2023
+opensea\-transport Version: 7.1.0
+opensea\-operations Version: 6.0.0
+Build Date: May  6 2024
 Compiled Architecture: X86_64
 Detected Endianness: Little Endian
-Compiler Used: GCC
-Compiler Version: 7.5.0
+Compiler Used: Clang
+Compiler Version: 14.0.0
 Operating System Type: Linux
-Operating System Version: 4.15.0\-211
-Operating System Name: Ubuntu 18.04.6 LTS
+Operating System Version: 5.15.146\-0
+Operating System Name: Ubuntu 22.04.4 LTS
+.SH "SEE ALSO"
+The full documentation for
+.B openSeaChest_Basics
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B openSeaChest_Basics
+programs are properly installed at your site, the command
+.IP
+.B info openSeaChest_Basics
+.PP
+should give you access to the complete manual.

docs/man/man8/openSeaChest_Configure.8

@@ -1,15 +1,15 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH VERSION "8" "December 2023" "Version Info for openSeaChest_Configure:" "System Administration Utilities"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.1.
+.TH OPENSEACHEST_CONFIGURE "1" "May 2024" "openSeaChest_Configure ==========================================================================================" "User Commands"
 .SH NAME
-Version \- =drive utilities
+openSeaChest_Configure \- manual page for openSeaChest_Configure ==========================================================================================
 .SH DESCRIPTION
 ==========================================================================================
 .IP
 openSeaChest_Configure \- openSeaChest drive utilities \- NVMe Enabled
-Copyright (c) 2014\-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
-openSeaChest_Configure Version: 2.5.0\-6_2_0 X86_64
-Build Date: Dec  1 2023
-Today: Fri Dec  1 15:18:13 2023        User: current user
+Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
+openSeaChest_Configure Version: 2.7.1\-7_1_0 X86_64
+Build Date: May  6 2024
+Today: Mon May  6 12:10:34 2024        User: current user
 .PP
 ==========================================================================================
 Usage
@@ -124,12 +124,6 @@ Using this option will force the current drive to
 be treated as a SCSI drive. Only SCSI commands will
 be used to talk to the drive.
 .HP
-\fB\-\-forceNVME\fR
-.IP
-Using this option will force the current drive to
-be treated as a NVME drive. Only NVME commands will
-be used to talk to the drive.
-.HP
 \fB\-h\fR, \fB\-\-help\fR
 .IP
 Show utility options and example usage (this output you see now)
@@ -461,13 +455,24 @@ Note: Some products will support low, but not the ultra
 .IP
 low current spinup mode.
 .TP
-\fB\-\-puisFeature\fR [ enable | disable ]
+\fB\-\-puisFeature\fR [ info | spinup | enable | disable ]
 (SATA Only)
 .IP
 Use this option to enable or disable the power up in standby
 (PUIS) feature on SATA drives.
+Arguments:
+.TP
+info
+\- display information about the PUIS support on the device
+.TP
+spinup
+\- issue the PUIS spinup set features command to spin up
+.TP
+the device to active/idle state.
+enable  \- enable the PUIS feature using setfeatures command
+disable \- disable the PUIS feature using setfeatures command
+.TP
 Note: If this is configured on the drive with a jumper, this
-.IP
 command will fail.
 .IP
 Note2: Not all products support this feature.
@@ -565,6 +570,40 @@ The maximum time that can be specified is 1 hour, 49 minutes, 13 seconds
 Using the "default" argument restores default settings.
 Note: On some SAT HBAs/bridges, status will not be able to be
 determined due to HBA/bridge limitations.
+.TP
+\fB\-\-wrv\fR [ info | all | vendor | # | disable ]
+(SATA Only)
+.IP
+This option can report the current configuration of the
+ATA Write\-Read\-Verify feature, enable the feature, or
+disable the feature.
+Enabling this feature instructs the device to perform a
+verification of all data after it has been written.
+Enabling this may result in lower device performance.
+If write caching is enabled, this feature may return
+completion before writing to the medium and verifying
+the medium. If Write caching is disabled, the write and
+verification must complete before returning command status.
+Argument usage:
+.TP
+info
+\- Display the current status of the feature
+.TP
+all
+\- set verification on for all written sectors
+.TP
+vendor
+\- set verification for the 1st vendor specific
+.IP
+number of sectors.
+.TP
+#
+\- Perform verification for the first user defined
+.TP
+number of sectors. Note: This is rounded up to the
+nearest 1024 sectors. Max value of 261120 sectors.
+.IP
+disable \- disable the Write\-Read\-Verify feature.
 .IP
 SAS Only:
 ========
@@ -750,15 +789,36 @@ the provisioning again. This command erases all data between
 the new maxLBA specified and the current maxLBA of the device.
 using a TRIM/UNMAP command.
 .IP
-Utility Version: 2.5.0
+openSeaChest_Configure \- openSeaChest drive utilities \- NVMe Enabled
+Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
+openSeaChest_Configure Version: 2.7.1\-7_1_0 X86_64
+Build Date: May  6 2024
+Today: Mon May  6 12:10:34 2024        User: current user
+.PP
+==========================================================================================
+Version Info for openSeaChest_Configure:
+.IP
+Utility Version: 2.7.1
 opensea\-common Version: 2.0.0
-opensea\-transport Version: 6.2.0
-opensea\-operations Version: 5.1.1
-Build Date: Dec  1 2023
+opensea\-transport Version: 7.1.0
+opensea\-operations Version: 6.0.0
+Build Date: May  6 2024
 Compiled Architecture: X86_64
 Detected Endianness: Little Endian
-Compiler Used: GCC
-Compiler Version: 7.5.0
+Compiler Used: Clang
+Compiler Version: 14.0.0
 Operating System Type: Linux
-Operating System Version: 4.15.0\-211
-Operating System Name: Ubuntu 18.04.6 LTS
+Operating System Version: 5.15.146\-0
+Operating System Name: Ubuntu 22.04.4 LTS
+.SH "SEE ALSO"
+The full documentation for
+.B openSeaChest_Configure
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B openSeaChest_Configure
+programs are properly installed at your site, the command
+.IP
+.B info openSeaChest_Configure
+.PP
+should give you access to the complete manual.

docs/man/man8/openSeaChest_Defect.8

@@ -9,7 +9,7 @@ openSeaChest_Defect \- openSeaChest drive utilities \- NVMe Enabled
 Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
 openSeaChest_Defect Version: 0.9.0\-7_1_0 X86_64
 Build Date: May  6 2024
-Today: Mon May  6 11:25:27 2024        User: current user
+Today: Mon May  6 12:10:34 2024        User: current user
 .PP
 ==========================================================================================
 Usage
@@ -247,6 +247,37 @@ Defects log page from SBC4 or later
 Use this option to show the pending defect list
 as it is reported by the drive.
 NOTE: SBC4 pending log required for SAS support.
+.IP
+SAS Only:
+.HP
+\fB\-\-defectFormat\fR [ # | shortBlock | longBlock | xbfi | xchs | bfi | chs ] (SAS Only)
+.IP
+This option set the format of the defects to output.
+Not all drives will support all defect modes!
+SSDs will only support block modes!
+Arguments: (name | #)
+.IP
+shortBlock | 0 \- show the defects in short block address mode (drives < 32bit LBA)
+xbfi       | 1 \- show the defects in extended bytes from index mode
+xchs       | 2 \- show the defects in extended physical cylinder\-head\-sector mode
+longBlock  | 3 \- show the defects in long block address mode (drives > 32bit LBA)
+bfi        | 4 \- show the defects in bytes from index mode
+chs        | 5 \- show the defects in physical cylinder\-head\-sector mode
+.TP
+\fB\-\-showSCSIDefects\fR [ p | g | pg ]
+(SAS Only)
+.IP
+This option will display the SCSI defects on the screen.
+The arguments to this will tell whether to get the grown,
+primary, or primary and grown defects from the drive.
+Use the \fB\-\-defectFormat\fR option to specify the mode to display the defects.
+If no mode is specified, physical cylinder\-head\-sector mode is assumed
+Arguments:
+.IP
+p \- use this option to pull and display the primary (factory) defects
+g \- use this option to pull and display the grown (reallocated) defects
+.IP
+The above options can be combined to pull and display both defect lists.
 .PP
 Data Destructive Commands (Seagate only)
 ========================================
@@ -342,7 +373,7 @@ openSeaChest_Defect \- openSeaChest drive utilities \- NVMe Enabled
 Copyright (c) 2014\-2024 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
 openSeaChest_Defect Version: 0.9.0\-7_1_0 X86_64
 Build Date: May  6 2024
-Today: Mon May  6 11:25:27 2024        User: current user
+Today: Mon May  6 12:10:34 2024        User: current user
 .PP
 ==========================================================================================
 Version Info for openSeaChest_Defect: