Merge pull request #5 from Sensirion/update-readme

Update readme

README.md

@@ -186,6 +186,18 @@ You will find pinout schematics for recommended board models below:
    Plotter` via the `Tools` menu to observe the measurement values. Note that
    the `Baud Rate` in the used tool has to be set to `115200 baud`.
 
+### Additional Examples
+
+#### Forced Recalibration
+
+There is a detailed explenation, see [Documentation](examples/exampleUsageFrc/README.md).
+
+To run the example, open the `exampleUsageFrc` sample project within the Arduino IDE.
+
+#### Example for mesaurement with RHT Compenstation
+
+To run the example, open the `measurementWithCompenstation` sample project within the Arduino IDE.
+
 ## Contributing
 
 **Contributions are welcome!**

examples/exampleUsageFrc/README.md

@@ -10,7 +10,7 @@ cylce, those states need to be restored.
 The post-soldering FRC procedure is documented in the paragraph 5 of the
 [Desing guide](https://sensirion.com/resource/application_note/design_guide_STC31-C)
 
-All used commands and formulas used in this exampel can be found in the
+All used commands and formulas used in this example can be found in the
 [Datasheet](https://sensirion.com/resource/datasheet/stc31-c)
 
 ## Post-soldering Forced Recalibration Process