adding github workflow #2
Sensirion-BotAnnotations
185 errors
|
test / test (3.10, ubuntu-22.04)
Process completed with exit code 4.
|
|
test / test (3.11, macos-latest)
Process completed with exit code 4.
|
|
test / test (3.11, ubuntu-22.04)
Process completed with exit code 4.
|
|
test_cmds.test_single_shot_measurement:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_on:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_off:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_clear_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_heater.test:
tests/sht3x/test_heater.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_single_shot_measurement.test_invalid_config:
tests/sht3x/test_single_shot_measurement.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.NORMAL]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_product_id:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.9, ubuntu-22.04)
Process completed with exit code 1.
|
|
test / test (3.10, macos-latest)
[notice] A new release of pip is available: 23.0.1 -> 24.0
[notice] To update, run: python3.10 -m pip install --upgrade pip
|
|
test / test (3.10, macos-latest)
Process completed with exit code 4.
|
|
test / test (3.8, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_cmds.test_single_shot_measurement:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_on:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_off:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_clear_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_heater.test:
tests/sht3x/test_heater.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_single_shot_measurement.test_invalid_config:
tests/sht3x/test_single_shot_measurement.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.NORMAL]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_product_id:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.9, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.9, macos-latest)
[notice] A new release of pip is available: 22.0.4 -> 24.0
[notice] To update, run: python3.9 -m pip install --upgrade pip
|
|
test_cmds.test_single_shot_measurement:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_on:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_off:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_clear_status_register:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_heater.test:
tests/sht3x/test_heater.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_single_shot_measurement.test_invalid_config:
tests/sht3x/test_single_shot_measurement.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.NORMAL]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_product_id:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.HIGH]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.MEDIUM]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.LOW]:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests/sht2x/test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_on:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_off:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_status_register:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_clear_status_register:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_heater.test:
tests\sht3x\test_heater.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_single_shot_measurement.test_invalid_config:
tests\sht3x\test_single_shot_measurement.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.NORMAL]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_product_id:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht3xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_on:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_heater_off:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_status_register:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_clear_status_register:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_heater.test:
tests\sht3x\test_heater.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_single_shot_measurement.test_invalid_config:
tests\sht3x\test_single_shot_measurement.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sht4xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.LONG-Sht4xHeaterPower.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_activate_heater[Sht4xHeaterActivationDuration.SHORT-Sht4xHeaterPower.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.NORMAL]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_measure[Shtc3PowerMode.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_product_id:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.HIGH]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.MEDIUM]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_single_shot_measurement[Sts4xRepeatability.LOW]:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_soft_reset:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_cmds.test_read_serial_number:
tests\sht2x\test_cmds.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.8, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.8, macos-latest)
[notice] A new release of pip is available: 21.1.1 -> 24.0
[notice] To update, run: python3.8 -m pip install --upgrade pip
|
|
test / test (3.10, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.11, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.9, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.8, windows-latest)
Process completed with exit code 1.
|