Skip to content

SpontaneousDuck/SimpleScalar

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

OVERVIEW:

This README file is for the SimpleScalar simulator release 3.0.  This release
is available from:

	http://www.simplescalar.com

in the file simplesim-3v0d.tar.gz.


TO INSTALL:

The following details how to build and install the SimpleScalar simulators:

	a) vi Makefile

	Make sure all compile options are set for your host, we've listed
	the options for the OS/compiler combinations that were tested,
	uncomment one of these if appropriate.  You'll likely not have to
	change anything for the supported hosts, and if you need to change
	anything, it will likely be the CC variable (which specifies
	the ANSI C compiler to use to build the simulators).  NOTE: the
	simulators must be built with an ANSI-C compatible compiler, if you
	have problems with your compiler, try using GNU GCC as it is known
	to build the simulators on all the supported platforms.

	b) make config-pisa			(to build SimpleScalar/PISA)
	   or
	   make config-alpha			(to build SimpleScalar/Alpha)

	Execute one of the above commands to configure the SimpleScalar
	build.  The SimpleScalar/PISA build executes SimpleScalar PISA
	(Portable ISA) binaries (the old "SimpleScalar ISA"), and the
	SimpleScalar/Alpha build executes statically linked Alpha OSF
	binaries.  If building with Cygwin/32 (www.cygwin.com) on Windows,
        be sure to unpack with "tar" to set up the symbolic links.

	c) make

	This builds the simplescalar simulators.

	d) make sim-tests

	This tests the simulators, this step will take anywhere from ~5 min
	to an hour, depending on the performance of your host.  Inspect the
	output of this command, when the script diff's the outputs of the
	simulators against the known good outputs, there should be no
	differences.

	e) vi pipeview.pl textprof.pl

	Configure these two perl scripts by placing the location of your
	perl executable on the first line of each script.


BUILDING BINARIES FOR SIMPLESCALAR

SimpleScalar/PISA binaries must be built using the SimpleScalar GNU tool
chain (e.g., GCC, GAS, GLD), available from:

    http://www.cs.wisc.edu/~mscalar/simplescalar.html

Prebuilt SimpleScalar PISA (Portable ISA) binaries, for big- and
little-endian hosts, are also available from that site.

SimpleScalar/Alpha binaries must be built on Digitial Alpha OSF Unix (or
with a suitable cross compiler).  Any Alpha OSF Unix compiler should
work, however, the binaries must be statically linked.  To statically
link a binary, add the "-static" flag to the link line of GNU GCC, or add
"-non_shared" to the link line of the DEC compilers.  NOTE: if you get
a "dnet_conn not found" error when linking Alpha OSF binaries, add
"-ldnet_stub" to your link line.


IS SIMPLESCALAR FREE?

No, but academic users (e.g., users at education institutions, U.S.
government research labs, and non-profit research institutes) may use
SimpleScalar tools free-of-charge for non-commercial research and
instruction. Support is provided to non-commercial users as resources
permit. Any use of SimpleScalar software, in binary or source form,
in a commercial setting or application (e.g., use within a for-profit
business, use to generate intellectual property for patents, or use
to implement a consulting contract) for any reason, purpose or goal
is commercial use of SimpleScalar software and thus requires a
commercial use license from SimpleScalar LLC.  Contact SimpleScalar
LLC at info@simplescalar.com for commercial licensing details.


PUBLISHING PAPERS WITH SIMPLESCALAR

When publishing a paper with SimpleScalar results, please refer to the
specific target you use as "SimpleScalar/PISA" or "SimpleScalar/Alpha".
In addition, please make reference to the latest SimpleScalar report,
this reference is available from:

    http://www.simplescalar.com

Above all, please use good judgement when doing research with the
SimpleScalar tool set.  Before publishing any numbers you should validate
your results.  Use the pipetrace facility, combined with microbenchmarks,
to test our code, your code, and your intuitions.  If the simulators are
not appropriate for your experiments, build a new simulator or use
another more appropriate simulation tool set.  The SimpleScalar tool set
is not appropriate for all computer architecture research, and it's
certainly not any substitute for good science.


USING SIMPLESCALAR FOR INSTRUCTION

Many instructors have found the SimpleScalar tools useful in their
courses.  To make this process as painless as possible, we've made
available an instructors kit that includes pre-built binaries with
small-ish inputs.  Also included are directions on how to build and
run the experiments, suggested projects at all levels, and slides
that the instructor can use to introduce students to the Simplescalar
tool set.  The instructions kit is available from http://www.simplescalar.com.


FOR MORE INFORMATION:

For general documentation on the tool set, see the hacker's guide in the
file "hack_guide.{pfd,ps,ppt}".  Frequently asked questions are answered
in the FAQ file.  And suggested projects are listed in the file PROJECTS.
The simulators (the sim-* executables) are self-documenting, just run
them with the "-h" flag.

To get plugged into the SimpleScalar scene, visit the SimpleScalar web
site (www.simplescalar.com).  And please send us your comments regarding
this tool set, we are continually trying to improve it and we appreciate
your input.

Best Regards,

Todd Austin
SimpleScalar LLC
info@simplescalar.com

About

Computer Architecture Simple Scalar Assignment #1

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 95.4%
  • Makefile 2.2%
  • Perl 0.9%
  • Shell 0.6%
  • Lex 0.4%
  • C++ 0.3%
  • Assembly 0.2%