Merge pull request #425 from TG9541/standard

Standard

README.md

@@ -6,16 +6,16 @@ STM8 eForth is an interactive Forth system for the full range of [STM8 8-bit MCU
 
 The original STM8 eForth was written by [Dr. C.H. Ting's eForth](http://www.forth.org/svfig/kk/07-2010.html) for the STM8S Discovery. With the kind permission of Dr. Ting the code presented here is under [MIT license](https://github.com/TG9541/stm8ef/blob/master/LICENSE.md). Bugs were fixed, code size reduced, standards compatibility improved and many features were added (e.g. compilation to Flash memory, autostart code, interrupt handling - see [overview](https://github.com/TG9541/stm8ef#stm8-eforth-feature-overview)).
 
-The [binary release](https://github.com/TG9541/stm8ef/releases) provides ready-to-run Forth binaries for a range of target boards or devicesi, a library and STM8 register definitions. Build and test automation in the [uCsim STM8 simulator](https://travis-ci.org/TG9541/stm8ef) in Travis-CI provides is used for quality control. Binary releases also contain the tested source code of STM8 eForth core and libraries so that downstream projectes can use the [modular build support](https://github.com/TG9541/stm8ef-modular-build) to add new targets with specific hardware support, memory layout or a tailored vocabulary.
+The [binary release](https://github.com/TG9541/stm8ef/releases) provides ready-to-run Forth binaries for a range of target boards or devices, a library and STM8 register definitions. Build and test automation in the [uCsim STM8 simulator](https://travis-ci.org/TG9541/stm8ef) in Travis-CI provides is used for quality control. Binary releases also contain the tested source code of STM8 eForth core and libraries so that downstream projectes can use the [modular build support](https://github.com/TG9541/stm8ef-modular-build) to add new targets with specific hardware support, memory layout or a tailored vocabulary.
 
 [![STM8EF Wiki](https://user-images.githubusercontent.com/5466977/28994765-3267d78c-79d6-11e7-927f-91751cd402db.jpg)](https://github.com/TG9541/stm8ef/wiki)
 
 ## About Forth
 
-Forth works by defining new words with phrases of existing words - "Hello World" in Forth is this:
+Forth works by defining new words with "phrases" consisting of existing words - "Hello World" in Forth is this:
 
 ```Forth
-: hello ."  Hello World!" ;
+: hello ." Hello World!" ;
 ```
 
 Forth is a "low level" language that offers a high level of abstraction:
@@ -32,7 +32,7 @@ Forth is so simple that you can learn the basics in a snap, e.g. in the [STM8 eF
 
 STM8 eForth itself is coded in STM8 assembler but it uses the SDCC tool chain. Combining Forth with C is possible.
 
-STM8 eForth is highly configurable: a Forth binary that allows compiling new words to Flash fits in 4 to 5.5K ROM (a minimal interactive system fits in 3.5K). Due to the extraordinary code density a very-low-cost 8K device, e.g. [STM8S003F3P6](https://www.st.com/resource/en/datasheet/stm8s003f3.pdf) or [STM8L051F3P6](https://www.st.com/resource/en/datasheet/stm8l051F3.pdf) has sufficent space for non-trivial applications. If more is needed, low-cost 32K devices with many GPIOs or a richer set of peripherals can be used, e.g. [STM8S005C6](https://www.st.com/resource/en/datasheet/stm8s005c6.pdf) or [STM8L052C6](https://www.st.com/resource/en/datasheet/stm8l052c6.pdf).
+STM8 eForth is highly configurable: a Forth binary that allows compiling new words to Flash ROM or RAM requires less than 4K. A binary with an extended vocabulary needs no more than about 5.5K. Due to the extraordinary code density a very-low-cost 8K device, e.g. [STM8S003F3P6](https://www.st.com/resource/en/datasheet/stm8s003f3.pdf) or [STM8L051F3P6](https://www.st.com/resource/en/datasheet/stm8l051F3.pdf) has sufficent space for non-trivial applications. If more is needed a low-cost 32K device with a rich set of peripherals can be used, e.g. [STM8S005C6](https://www.st.com/resource/en/datasheet/stm8s005c6.pdf) or [STM8L052C6](https://www.st.com/resource/en/datasheet/stm8l052c6.pdf).
 
 The Forth console uses the STM8 U(S)ART or a simulated serial interface for communicating with the console (3-wire full-duplex or 2-wire half-duplex are supported). For console access and programming [e4thcom](https://wiki.forth-ev.de/doku.php/en:projects:e4thcom) is recommended but any serial terminal will work. The console can be configured, even at runtime, to use other types of [character I/O](https://github.com/TG9541/stm8ef/wiki/STM8-eForth-Board-Character-IO), e.g. keyboard and display.
 

docs/words.md

@@ -895,6 +895,16 @@
 ;       this should be sufficent to replace COMPILE and [COMPILE]
 ```
 
+```
+;       COMPILE ( -- )
+;       Ersatz using POSTPONE
+```
+
+```
+;       [COMPILE] ( -- )
+;       Ersatz using POSTPONE
+```
+
 ```
 ;       ,       ( w -- )
 ;       Compile an integer into
@@ -906,6 +916,12 @@
 ;       Compile a byte into code dictionary.
 ```
 
+```
+;       A,  ( A -- )
+;       Compile a byte in A into code dictionary.
+;       GENALIAS  ACOMMA "A,"
+```
+
 ```
 ;       CALL,   ( ca -- )
 ;       Compile a subroutine call.
@@ -968,6 +984,12 @@
 ;       indefinite loop structure.
 ```
 
+```
+;       COMPILIT  ( -- )
+;       Compile call to inline literall target address into code dictionary.
+;       GENALIAS  COMPILIT "COMPILIT"
+```
+
 ```
 ;       AGAIN   ( a -- )
 ;       Terminate a BEGIN-AGAIN

inc/bgtask.inc

@@ -11,8 +11,6 @@
         .ifne   HAS_BACKGROUND
         RamWord BGADDR          ; address of background routine (0: off)
         RamWord TICKCNT         ; "TICKCNT" 16 bit ticker (counts up)
-
-        BSPPSIZE = BG_STACKSIZE ; Size of data stack for background tasks
        .endif
 
        ;******  timer macro  ******

inc/defconf.inc

@@ -4,7 +4,7 @@
 ;--------------------------------------------------------
         RELVER1          = 2    ; Revision digit 1
         RELVER0          = 8    ; Revision digit 0
-        PRE_REL          = 1    ; Pre Release digit 0 (0: release)
+        PRE_REL          = 0    ; Pre Release digit 0 (0: release)
 
         TERM_LINUX       = 1    ; LF terminates line
 
@@ -41,8 +41,7 @@
         BG_USE_TIM3      = 0    ; Use TIM3 for the Background Task (instead of TIM2)
         BG_TIM_REL  = 0x26DE    ; Reload value for Background Task timer (default for 5ms @ HSI 16MHz/8)
         BG_RUNMASK       = 0    ; BG task runs if "(BG_RUNMASK AND TICKCNT) equals 0"
-        BG_STACKSIZE     = 32   ; Default size in bytes of data stack for background tasks
-        BSPPSIZE         = 0    ; BG task data stack size (bytes) for memory calculation
+        BSPPSIZE         = 32   ; Default size in bytes of data stack for background tasks
 
         HAS_CPNVM        = 0    ; Can compile to Flash, always interpret to RAM
         HAS_DOES         = 0    ; DOES> extension