Merge main for RC1 of 3.0.2 patch release #640
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Added the new ubus command 'add_devices' which takes the same devies JSON schema data as the 'config' command does. This is needed, for example, to add dynamic VLAN uplink devices once they are created Signed-off-by: Paul White <paul@shasta.cloud>
When an uplink interface is created for a DVLAN due to swconfig support, add this new interface to dhcpsnoop Signed-off-by: Paul White <paul@shasta.cloud>
There are use cases where it's helpful to know the vlan_id assigned to a client (dynamic VLAN) when consuming the sta-authorized ubus event Signed-off-by: Paul White <paul@shasta.cloud>
This adds a workaround to fix an issue with 802.1x + DVLANs on platforms
where LAN ports are through an integrated switch (swconfig).
Netifd is tracking the wired ports as part of a bridge-vlan: either a
static one, or 4090 for the default untagged bridge. When hostapd
authorizes the wired port, netifd is automatically adding this bridge
vlan as PVID untagged to the port. The vlan_add event then adds the
dynamic VLAN as untagged to the same port. The result is that the
port is operating on the PVID bridge vlan, and not the dynamic VLAN.
Fixing this in netifd is going to be complex and take time, so this
change includes a workaround. When a wired client is authorized
using a dynamic VLAN, ucentral-event takes the following actions:
- Remove the bridge VLAN from the port
bridge vlan del dev <port> vid <bridge-vlan>
- Modify the dynamic VLAN to PVID
bridge vlan add dev <port> vid <dynamic-vlan> pvid untagged
Fixes: WIFI-13358
Signed-off-by: Paul White <paul@shasta.cloud>
The bootcount wasn't getting reset to 0 upon a successful boot, resulting in falling back to the previous firmware version after three reboots of the AP. Fixes: WIFI-13359 Signed-off-by: Paul White <paul@shasta.cloud>
Use base MAC address to generate PHY BSSIDs. Signed-off-by: Arif Alam <arif.alam@netexperience.com>
Signed-off-by: John Crispin <john@phrozen.org>
Fixes: WIFI-13368 Signed-off-by: John Crispin <john@phrozen.org>
fda6ded fix tracking of upstream swconfig vlans Fixes: WIFI-13316 Signed-off-by: John Crispin <john@phrozen.org>
This was lost during kernel v4.4 to v5.4 migration. Bring back correct pin configuration (only 2-pin) and UART node used by the on-board MCU. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds config for nRF52833 MCU reset pin on the CIG WF196. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This exports MCU reset pin as 'mcu-enable' in sysfs with 'gpio-export'. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This change focuses on the I/O related cleanups for EdgeCore {E,O}AP102
DTS files. List of changes:
1. Remove 'usb_mux_sel' pinctrl mux
Defined label isn't used as reference in any other node and defined
GPIO isn't used as well.
2. Remove 'pci@20000000', related PHY and pinctrl mux nodes
{E,O}AP102 doesn't use of any of the IPQ8071A PCIe buses.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds configuration for pins connected with nRF52840 MCU (reset and
one apparently used by device vendor for DTM enable) and related to USB
(GL850G HUB reset and rear/side ports power) on the EdgeCore {E,O}AP102.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This exports MCU/USB related pins in sysfs using 'gpio-export' on the
EdgeCore {E,O}AP102 boards as:
- mcu-enable
- usb-rear-power
- usb-side-power
- usb-hub-enable
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6704b5b83e9d smp: fix minor spelling typos
a0c5a18fa2a5 zcbor: upgrade zcbor to 0.7.0
52aee9047ec2 zcbor/smp: replace auto-generated code with zcbor functions
09606bc8e449 smp: print {en,de}code error with 'zcbor_peek_error'
b91c19ef5106 umcumgr/smp: allow disabling 'confirm' and 'test' commands
5849f7a503cd smp: restore timeout value for select()
45d9523c0c13 umcumgr: use 'stderr' for 'usage' only if error occurred
28d0044ab5b3 umcumgr: introduce support for TI serial bootloader
db34a3645b21 umcumgr: add support for 'dump' in TI serial bootloader mode
df3f235bcb3c smp: fix images list print
bde8686bac61 zcbor: upgrade zcbor to 0.8.1
ed34b2816f2b smp: adapt to changes introduced in zcbor 0.8.0
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
a3ea74a Provide Input Validation for Romaing Mobility Domain Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
* finalize CIG WF198 support * add Sercomm AP72tip support * update BDF files * improve firmware package Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: HaiBac <mail@bacnh.com>
…"EdgeCore EAP111" Signed-off-by: Tanya Singh <tanya_singh@accton.com>
e3d9064 captive: fix custom webroot config Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Define the blue sys LED from the device tree as the POWER LED for the CyberTAN EWW631-B1 platform. This allows LED control through uCentral Signed-off-by: Paul White <paul@shasta.cloud> Fixes: WIFI-13435 Signed-off-by: John Crispin <john@phrozen.org>
Fixes: WIFI-13384 Signed-off-by: John Crispin <john@phrozen.org>
…dr assignment Fixes: WIFI-13253 Signed-off-by: Tanya Singh <tanya_singh@accton.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Arif Alam <arif.alam@netexperience.com>
This broke CI builds. Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: wingate5678 <wingate.chi@cybertan.com.tw>
Signed-off-by: John Crispin <john@phrozen.org>
da09093 fix bss color handling Signed-off-by: John Crispin <john@phrozen.org>
Fixes: WIFI-13497 Signed-off-by: Tanya Singh <tanya_singh@accton.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: jaspreet.sachdev@kinarasystems.com