Remodora - Remote Control Pandora Through a Website

Ryan Pusztai, 2016 (MIT/X11)

Control Pandora through a website using pianobar and libpiano.

Why Remodora?

The idea is to have a cheap headless server with audio that you can control through the web. A possible solution is a Raspberry Pi for $35.00. Then you can connect to it through any laptop, computer or phone and use the web browser to control the audio without being near the audio system. This can be helpful if you have builtin home audio system or you are out on the deck and want to change the music or check who is playing that current song.

Name

The name is just a combination of Remote and Pandora.

Requirements

• LuaJIT 5.2+
• Turbo.lua
• Penlight
• LuaJSON
• LuaRocks
• Pianobar

Installation

Debian Based Distros + Raspbian

1. Install LuaJIT 2.0+ and Pianobar. NOTE: Pianobar is old when you get it from the repository, so your results may very. Please see doc/notes.md for instructions on installing it from source. At this time I recommend installing it from source.

    $ sudo apt-get install luajit pianobar libssl-dev liblua5.1-0-dev
   

If you are using a Raspberry Pi 2 I recommend using Pulse Audio by simply installing it. I found that there is a lot of static from the analog headphone jack. Installing pulseaudio

	$ sudo apt-get install pulseaudio

Edit /etc/libao.conf by changing default_driver=alsa to default_driver=pulse.

	$ sudo nano /etc/libao.conf

2. Install LuaRocks

    $ wget http://luarocks.org/releases/luarocks-2.2.2.tar.gz
    $ tar zxpf luarocks-2.2.2.tar.gz
    $ cd luarocks-2.2.2
    $ ./configure; sudo make bootstrap
   

3. Install Turbo.lua and LuaJSON

    $ sudo luarocks install turbo
    $ sudo luarocks install luajson
    $ sudo luarocks install penlight
    $ sudo luarocks install luasocket
   

4. Download the source from GitHub

5. Extract it to any location

    $ unzip <remodora>.zip
   

6. Execute the remodora script from inside the directory you extracted the source to. If a prefix is needed then pass that as the first argument. A prefix is appended to the URL. This can be useful if you are running any other apps on the server or for using a proxy server. In normal operation this is probably not needed. Also change the href attribute of <base href=""> in the file index.html to match any prefix you are using.

    $ ./remodora
   

or

	$ ./remodora <prefix-if-any>

7. Open a browser and point it at http://your-ip:8888/<prefix-if-any>.

8. Close Remodora after the first launch. It will create the config file template. Close Remodora and edit ~/.config/pianobar/config. Change the file to match your Pandora login details

    user = your@user.name
    password = password
   

When it loads for the first time it will take you to the settings dialog. Fill in your Pandora username and password. Please be aware that Remodora will be managing the pianobar settings file, so if you edit it by hand it will overwrite it. 9. Start Remodora again. Enjoy the music.

Debian Jessie+ Start At Boot

This will make Remodora start on boot and run as the user www-data.

NOTE: Please review the settings in remodora.service if you choose to store the files somewhere else.

1. Copy Remodora directory to /var/turbo/remodora.

    $ mkdir /var/turbo
    $ cp Remodora /var/turbo
    $ mv /var/turbo/Remodora /var/turbo/remodora
   

2. Copy the remodora.service file to /etc/systemd/system/remodora.service. $ sudo cp /var/turbo/remodora/remodora.service /etc/systemd/system

3. Change the permissions of the file to 664.

    $ sudo chmod 664 /etc/systemd/system/remodora.service
   

4. Reload systemd config.

    $ sudo systemctl daemon-reload
   

5. Make the .config directory manually so that the user that runs the service can use to store Pianobars configuration.

    $ sudo mkdir -p /var/www/.config
    $ sudo chown www-data:www-data /var/www/.config
   

6. Allow the user www-data to play the music by adding www-data to the audio group in /etc/group.

7. Add the service to start automatically on boot.

    $ sudo systemctl enable remodora.service
   

NON-FUNCTIONING - Windows

CAUTION! CAUTION! - Does not work at this because fifo is not currently supported by the Pianobar Windows port.

1. Install Lua for Windows
2. Install the Windows version of Pianobar
3. Configure Pianobar

   • Add your username and password to the config file

       # User
       user = your@user.name
       password = password
       # or
       #password_command = gpg --decrypt ~/password
     

4. Download the source from GitHub
5. Extract the source
6. Double-click on the remodora.lua. This will open a Command Prompt
7. Open your web browser and point it at http://your-ip:8080.
8. Enjoy the music.

Uses

• Turbo.lua
• AngularJS
• Bootstrap