Rust userland library for Tock
Generally this library was tested with Tock Release 2.1.1.
The library should work on all Tock boards, but currently apps must be compiled for the flash and RAM address they are executed at. See Fix relocation for more details. This means that process binaries must be compiled especially for your board and that there can only be one application written in rust at a time and it must be installed as the first application on the board, unless you want to play games with linker scripts.
-
Ensure you have rustup installed.
-
Clone the repository:
git clone --recursive https://github.com/tock/libtock-rs cd libtock-rs -
Install the dependencies:
make setup
-
Use
maketo build examplesmake nrf52 EXAMPLE=console # Builds the console example for the nrf52
The easiest way to start using libtock-rs is adding an example to the
examples/ folder. We recommend starting by copying the console example, as
it is a simple example that shows you how to perform normal debug prints.
To build your example for your board you can use
make <platform> EXAMPLE=<example>An example can be flashed to your board after the build process by running:
make flash-<platform> EXAMPLE=<example>This script does the following steps for you:
- cross-compile your program
- create a TAB (tock application bundle)
- if you have a J-Link compatible board connected: flash this TAB to your board (using tockloader)
libtock-rs is licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Submodules, as well as the code in the ufmt directory, have their own licenses.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
The contribution guidelines can be found here: contribution guidelines