Merge pull request #16097 from Ultimaker/PP-10_Support_interface

Enable support interface

Contributes to CURA-10824

resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg

@@ -13,4 +13,8 @@ weight = 0
 
 [values]
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg

@@ -14,5 +14,9 @@ weight = 0
 [values]
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.8
 

resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg

@@ -20,6 +20,10 @@ retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg

@@ -29,7 +29,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg

@@ -15,5 +15,9 @@ weight = 0
 material_print_temperature = =default_material_print_temperature - 5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.8
 

resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg

@@ -21,6 +21,10 @@ retraction_hop = 0.2
 speed_print = 30
 speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.72
 travel_avoid_distance = 0.4
 wall_0_inset = 0.015

resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg

@@ -34,6 +34,10 @@ speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg

@@ -21,6 +21,10 @@ speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg

@@ -22,4 +22,8 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg

@@ -23,4 +23,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg

@@ -22,4 +22,8 @@ speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg

@@ -23,4 +23,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg

@@ -28,6 +28,9 @@ speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.4/layer_height)*layer_height
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg

@@ -26,6 +26,9 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.4/layer_height)*layer_height
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg

@@ -28,6 +28,9 @@ speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.4/layer_height)*layer_height
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg

@@ -26,6 +26,9 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 40 / 50)
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.4/layer_height)*layer_height
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg

@@ -21,4 +21,8 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg

@@ -20,4 +20,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg

@@ -20,4 +20,8 @@ speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg

@@ -20,4 +20,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg

@@ -14,7 +14,10 @@ weight = 1
 [values]
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg

@@ -15,7 +15,10 @@ weight = -1
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg

@@ -14,7 +14,10 @@ weight = 0
 [values]
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg

@@ -15,7 +15,10 @@ weight = -2
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg

@@ -31,7 +31,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg

@@ -31,7 +31,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg

@@ -30,7 +30,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg

@@ -31,7 +31,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.06mm.inst.cfg

@@ -20,4 +20,8 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg

@@ -19,4 +19,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.1mm.inst.cfg

@@ -20,4 +20,8 @@ speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.2mm.inst.cfg

@@ -19,4 +19,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg

@@ -21,5 +21,9 @@ retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 1
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg

@@ -21,5 +21,9 @@ speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 1
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg

@@ -17,5 +17,9 @@ machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 1
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg

@@ -24,5 +24,9 @@ retraction_prime_speed = =retraction_speed
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.8
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg

@@ -27,6 +27,10 @@ raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_wall = 50
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.9
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
 

resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg

@@ -35,6 +35,10 @@ speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35