-
Notifications
You must be signed in to change notification settings - Fork 6
Shopping List v3
VirusPilot edited this page Aug 31, 2023
·
4 revisions
- passive cooling with large 2mm copper heatsink (max. CPU temperature < 60 degrees celsius when not directly exposed to sunlight)
- very low OGN noise figure (< 5dB)
- external GNSS mouse
- total power draw measurements
- Pi3B, 1GB RAM: ~5.4W
- Pi3B+, 1GB RAM: ~6.6W
- Pi4B, 2GB RAM: ~6.8W
- PH1 screw driver
- small hacksaw (for mechanical case adjustments)
- 5mm drill bit for optional mounting
- Pi3B: https://www.raspberrypi.com/products/raspberry-pi-3-model-b/
- Pi3B+: https://www.raspberrypi.com/products/raspberry-pi-3-model-b-plus/
- Pi4B: https://www.raspberrypi.com/products/raspberry-pi-4-model-b/
- Nooelec nano 2+: https://www.nooelec.com/store/stratux-bundle-nano-2-plus.html (SDR plastic cases need to be removed so that two SDRs fit in the USB ports)
- Nooelec nano 3: https://www.nooelec.com/store/stratux-bundle-nano-3.html
Eleduino Stratux Case with (optional) Fan (designed for Pi3B, some mechanical adjustments required for Pi4B)
- Eleduino Store: http://www.eleduino.com/Aluminum-Case-for-ADS-B-Raspberry-Pi-Stratux-DIY-Kit-Black-p10625.html
- Taoglas: https://www.taoglas.com/product/ti-85-2113-2dbi-868mhz-terminal-mount-dipole-antenna/
- Delock: https://www.delock.com/produkt/88689/merkmale.html?f=s
- Prodrone: https://shop.prodrone.pl/en_US/p/ProFlex-Vee-868Mhz-915MHz/179 (make sure to select the appropriate frequency and connector)
- GliderDesignParts: http://www.gliderdesignparts.de/ant_flarm.en.html
- Prodrone: https://shop.prodrone.pl/en_US/p/ProFlex-Vee-868Mhz-915MHz/179 (custom order, you specifically need to order 1090MHz)
- GliderDesignParts: http://www.gliderdesignparts.de/ant_adsb.en.html
- all antennas need to be oriented vertically, in case of ProDrone and GliderDesignParts one antenna leg vertically, the other one horizontally
- only the Taoglas and the Nooelec bundle antennas are hinged so make sure to order an SMA adapter (angled) for all other antennas according to your needs
- both ProDrone and GliderDesignParts antennas can be custom ordered with either a straight or an angled SMA connector
GNSS (some mechanical adjustments required to the Eleduino case side cover so that the USB plug fits, a M5 rubber grommet is recommended)
- TopGNSS GN-803G (AliExpress): https://www.aliexpress.com/item/32951942245.html
- TopGNSS GNSS100L (AliExpress): https://www.aliexpress.com/item/32947733363.html
- TopGNSS GN-803G (directly): https://www.topgnss.com/product1/showproduct.php?id=38
- TopGNSS GNSS100L (directly): https://www.topgnss.com/product1/showproduct.php?id=37
- dross:aviation: https://dross.net/aviation/shop/assembled-plug-play-ready-bmp280-pressure-altitude-sensor-boards-for-stratux-flarm/ (make sure to select board type v3.1)
- Pimoroni: https://shop.pimoroni.com/products/bmp280-breakout-temperature-pressure-altitude-sensor?variant=15383480336467 (electric soldering iron required)
- dross:aviation: https://dross.net/aviation/shop/assembled-plug-play-ready-sensor-boards-for-stratux-flarm-gy91-mpu9250-mpu9255-bmp280/ (make sure to select board type v3.1)
- Arctic Cooling Pads: https://www.arctic.de/en/TP-2-APT2560/ACTPD00003A
- put two cooling pads on top of each of the Pi's USB port metal cases
- 2mm copper heatsink for Pi3B/Pi3B+ https://www.aliexpress.com/item/1005001936477582.html
- 2mm copper heatsink for Pi4B https://www.aliexpress.com/item/1005001691525070.html
- Ram Mount: https://www.rammount.com/part/RAP-224-1U