Sensors

1. Gravity BME 680 1.1 Parameters calculated:

1.2 Library (Arduino IDE):
>https://github.com/DFRobot/DFRobot_BME680<

1.3 Datasheet:
>https://media.digikey.com/pdf/Data%20Sheets/DFRobot%20PDFs/SEN0248_Web.pdf

2. CJMCU 8128 (integrated sensor) 2.1 Bosch BMP 280

   2.1.1 Parameters caluculated:

   2.2.2 Library (Arduino IDE):
   

   https://github.com/adafruit/Adafruit_BMP280_Library

   2.2.3 Datasheet:
   

   https://cdn-shop.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf

2.2 T.I. HDC 1080

2.2.1 Parameters calculated:
  
2.2.2 Library (Arduino IDE):  <br> 
  >https://github.com/closedcube/ClosedCube_HDC1080_Arduino  
  
2.2.3 Datasheet:  <br>
  >http://www.ti.com/lit/ds/symlink/hdc1080.pdf

2.3 AMS CCS811

2.3.1 Parameters calculated:
  
2.3.2 Library (Arduino IDE):  <br> 
  >https://github.com/adafruit/Adafruit_CCS811
                 <br>        
  >https://github.com/sparkfun/SparkFun_CCS811_Arduino_Library
               
2.3.3 Datasheet:  <br>
  >https://cdn.sparkfun.com/assets/learn_tutorials/1/4/3/CCS811_Datasheet-DS000459.pdf

3. Grove SPG 30

3.1 Parameters calculated:

3.2 Library (Arduino IDE):
>https://github.com/Seeed-Studio/SGP30_Gas_Sensor
>https://github.com/adafruit/Adafruit_SGP30

3.3 Datasheet:

4. Grove LDR

4.1 Parameters calculated:

4.2 Library (Arduino IDE):

4.3 Datasheet:

Other Important Libraries

1. Time library
2. ThingSpeak

Arduino IDE installation for Linux

Warning: DON'T USE sudo apt-get install arduino
Follow the steps mentioned here:

https://www.arduino.cc/en/Guide/Linux

Some important steps to remember:

1. Run sudo bash arduino-linux-setup.sh

2. Reboot system.

3. Run sudo bash install.sh