BIP: 341 Layer: Consensus (soft fork) Title: Taproot: SegWit version 1 spending rules Author: Pieter Wuille <pieter.wuille@gmail.com> Jonas Nick <jonasd.nick@gmail.com> Anthony Towns <aj@erisian.com.au> Comments-Summary: No comments yet. Comments-URI: https://github.com/bitcoin/bips/wiki/Comments:BIP-0341 Status: Draft Type: Standards Track Created: 2020-01-19 License: BSD-3-Clause Requires: 340 Post-History: 2019-05-06: https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2019-May/016914.html [bitcoin-dev] Taproot proposal 2019-10-09: https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2019-October/017378.html [bitcoin-dev] Taproot updates
This document proposes a new SegWit version 1 output type, with spending rules based on Taproot, Schnorr signatures, and Merkle branches.
This document is licensed under the 3-clause BSD license.
This proposal aims to improve privacy, efficiency, and flexibility of Bitcoin's scripting capabilities without adding new security assumptions[1]. Specifically, it seeks to minimize how much information about the spendability conditions of a transaction output is revealed on chain at creation or spending time and to add a number of upgrade mechanisms, while fixing a few minor but long-standing issues.
A number of related ideas for improving Bitcoin's scripting capabilities have been previously proposed: Schnorr signatures (BIP340), Merkle branches ("MAST", BIP114, BIP117), new sighash modes (BIP118), new opcodes like CHECKSIGFROMSTACK, Taproot, Graftroot, G'root, and cross-input aggregation.
Combining all these ideas in a single proposal would be an extensive change, be hard to review, and likely miss new discoveries that otherwise could have been made along the way. Not all are equally mature as well. For example, cross-input aggregation interacts in complex ways with upgrade mechanisms, and solutions to that are still in flux. On the other hand, separating them all into independent upgrades would reduce the efficiency and privacy gains to be had, and wallet and service providers may not be inclined to go through many incremental updates. Therefore, we're faced with a tradeoff between functionality and scope creep. In this design we strike a balance by focusing on the structural script improvements offered by Taproot and Merkle branches, as well as changes necessary to make them usable and efficient. For things like sighashes and opcodes we include fixes for known problems, but exclude new features that can be added independently with no downsides.
As a result we choose this combination of technologies:
- Merkle branches let us only reveal the actually executed part of the script to the blockchain, as opposed to all possible ways a script can be executed. Among the various known mechanisms for implementing this, one where the Merkle tree becomes part of the script's structure directly maximizes the space savings, so that approach is chosen.
- Taproot on top of that lets us merge the traditionally separate pay-to-pubkey and pay-to-scripthash policies, making all outputs spendable by either a key or (optionally) a script, and indistinguishable from each other. As long as the key-based spending path is used for spending, it is not revealed whether a script path was permitted as well, resulting in space savings and an increase in scripting privacy at spending time.
- Taproot's advantages become apparent under the assumption that most applications involve outputs that could be spent by all parties agreeing. That's where Schnorr signatures come in, as they permit key aggregation: a public key can be constructed from multiple participant public keys, and which requires cooperation between all participants to sign for. Such multi-party public keys and signatures are indistinguishable from their single-party equivalents. This means that with taproot most applications can use the key-based spending path, which is both efficient and private. This can be generalized to arbitrary M-of-N policies, as Schnorr signatures support threshold signing, at the cost of more complex setup protocols.
- As Schnorr signatures also permit batch validation, allowing multiple signatures to be validated together more efficiently than validating each one independently, we make sure all parts of the design are compatible with this.
- Where unused bits appear as a result of the above changes, they are reserved for mechanisms for future extensions. As a result, every script in the Merkle tree has an associated version such that new script versions can be introduced with a soft fork while remaining compatible with BIP 341. Additionally, future soft forks can make use of the currently unused
annex
in the witness (see BIP341). - While the core semantics of the signature hashing algorithm are not changed, a number of improvements are included in this proposal. The new signature hashing algorithm fixes the verification capabilities of offline signing devices by including amount and scriptPubKey in the signature message, avoids unnecessary hashing, uses tagged hashes and defines a default sighash byte.
- The public key is directly included in the output in contrast to typical earlier constructions which store a hash of the public key or script in the output. This has the same cost for senders and is more space efficient overall if the key-based spending path is taken. [2]
This section specifies the Taproot consensus rules. Validity is defined by exclusion: a block or transaction is valid if no condition exists that marks it failed.
The notation below follows that of BIP340. This includes the hashtag(x) notation to refer to SHA256(SHA256(tag) || SHA256(tag) || x). To the best of the authors' knowledge, no existing use of SHA256 in Bitcoin feeds it a message that starts with two single SHA256 outputs, making collisions between hashtag with other hashes extremely unlikely.
A Taproot output is a native SegWit output (see BIP141) with version number 1, and a 32-byte witness program. The following rules only apply when such an output is being spent. Any other outputs, including version 1 outputs with lengths other than 32 bytes, or P2SH-wrapped version 1 outputs[3], remain unencumbered.
- Let q be the 32-byte array containing the witness program (the second push in the scriptPubKey) which represents a public key according to BIP340.
- Fail if the witness stack has 0 elements.
- If there are at least two witness elements, and the first byte of the last element is 0x50[4], this last element is called annex a[5] and is removed from the witness stack. The annex (or the lack of thereof) is always covered by the signature and contributes to transaction weight, but is otherwise ignored during taproot validation.
- If there is exactly one element left in the witness stack, key path spending is used:
- The single witness stack element is interpreted as the signature and must be valid (see the next section) for the public key q (see the next subsection).
- If there are at least two witness elements left, script path spending is used:
- Call the second-to-last stack element s, the script.
- The last stack element is called the control block c, and must have length 33 + 32m, for a value of m that is an integer between 0 and 128[6], inclusive. Fail if it does not have such a length.
- Let p = c[1:33] and let P = lift_x(int(p)) where lift_x and [:] are defined as in BIP340. Fail if this point is not on the curve.
- Let v = c[0] & 0xfe and call it the leaf version[7].
- Let k0 = hashTapLeaf(v || compact_size(size of s) || s); also call it the tapleaf hash.
- For j in [0,1,...,m-1]:
- Let t = hashTapTweak(p || km).
- If t ≥ 0xFFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFE BAAEDCE6 AF48A03B BFD25E8C D0364141 (order of secp256k1), fail.
- Let Q = P + int(t)G.
- If q ≠ x(Q) or c[0] & 1 ≠ y(Q) mod 2, fail[10].
- Execute the script, according to the applicable script rules[11], using the witness stack elements excluding the script s, the control block c, and the annex a if present, as initial stack.
We first define a reusable common signature message calculation function, followed by the actual signature validation as it's used in key path spending.
The function SigMsg(hash_type, ext_flag) computes the message being signed as a byte array. It is implicitly also a function of the spending transaction and the outputs it spends, but these are not listed to keep notation simple.
The parameter hash_type is an 8-bit unsigned value. The SIGHASH
encodings from the legacy script system are reused, including SIGHASH_ALL
, SIGHASH_NONE
, SIGHASH_SINGLE
, and SIGHASH_ANYONECANPAY
, plus the default hash_type value 0x00 which results in signing over the whole transaction just as for SIGHASH_ALL
. The following restrictions apply, which cause validation failure if violated:
- Using any undefined hash_type (not 0x00, 0x01, 0x02, 0x03, 0x81, 0x82, or 0x83[12]).
- Using
SIGHASH_SINGLE
without a "corresponding output" (an output with the same index as the input being verified).
If the parameters take acceptable values, the message is the concatenation of the following data, in order (with byte size of each item listed in parentheses). Numerical values in 2, 4, or 8-byte are encoded in little-endian.
- Control:
- hash_type (1).
- Transaction data:
- nVersion (4): the nVersion of the transaction.
- nLockTime (4): the nLockTime of the transaction.
- If the hash_type & 0x80 does not equal
SIGHASH_ANYONECANPAY
:- sha_prevouts (32): the SHA256 of the serialization of all input outpoints.
- sha_amounts (32): the SHA256 of the serialization of all spent output amounts.
- sha_scriptpubkeys (32): the SHA256 of the serialization of all spent output scriptPubKeys.
- sha_sequences (32): the SHA256 of the serialization of all input nSequence.
- If hash_type & 3 does not equal
SIGHASH_NONE
orSIGHASH_SINGLE
:- sha_outputs (32): the SHA256 of the serialization of all outputs in
CTxOut
format.
- sha_outputs (32): the SHA256 of the serialization of all outputs in
- Data about this input:
- spend_type (1): equal to (ext_flag * 2) + annex_present, where annex_present is 0 if no annex is present, or 1 otherwise (the original witness stack has two or more witness elements, and the first byte of the last element is 0x50)
- If hash_type & 0x80 equals
SIGHASH_ANYONECANPAY
:- outpoint (36): the
COutPoint
of this input (32-byte hash + 4-byte little-endian). - amount (8): value of the previous output spent by this input.
- scriptPubKey (35): scriptPubKey of the previous output spent by this input, serialized as script inside
CTxOut
. Its size is always 35 bytes. - nSequence (4): nSequence of this input.
- outpoint (36): the
- If hash_type & 0x80 does not equal
SIGHASH_ANYONECANPAY
:- input_index (4): index of this input in the transaction input vector. Index of the first input is 0.
- If an annex is present (the lowest bit of spend_type is set):
- sha_annex (32): the SHA256 of (compact_size(size of annex) || annex), where annex includes the mandatory 0x50 prefix.
- Data about this output:
- If hash_type & 3 equals
SIGHASH_SINGLE
:- sha_single_output (32): the SHA256 of the corresponding output in
CTxOut
format.
- sha_single_output (32): the SHA256 of the corresponding output in
- If hash_type & 3 equals
In summary, the semantics of the BIP143 sighash types remain unchanged, except the following:
- The way and order of serialization is changed.[15]
- The signature message commits to the scriptPubKey of the spent output and if the
SIGHASH_ANYONECANPAY
flag is not set, the message commits to the scriptPubKeys of all outputs spent by the transaction. [16]. - If the
SIGHASH_ANYONECANPAY
flag is not set, the message commits to the amounts of all transaction inputs.[17] - The signature message commits to all input nSequence if
SIGHASH_NONE
orSIGHASH_SINGLE
are set (unlessSIGHASH_ANYONECANPAY
is set as well).[18] - The signature message includes commitments to the taproot-specific data spend_type and annex (if present).
To validate a signature sig with public key q:
- If the sig is 64 bytes long, return Verify(q, hashTapSighash(0x00 || SigMsg(0x00, 0)), sig)[19], where Verify is defined in BIP340.
- If the sig is 65 bytes long, return sig[64] ≠ 0x00[20] and Verify(q, hashTapSighash(0x00 || SigMsg(sig[64], 0)), sig[0:64]).
- Otherwise, fail[21].
This section discusses how to construct and spend Taproot outputs. It only affects wallet software that chooses to implement receiving and spending, and is not consensus critical in any way.
Conceptually, every Taproot output corresponds to a combination of a single public key condition (the internal key), and zero or more general conditions encoded in scripts organized in a tree. Satisfying any of these conditions is sufficient to spend the output.
Initial steps The first step is determining what the internal key and the organization of the rest of the scripts should be. The specifics are likely application dependent, but here are some general guidelines:
- When deciding between scripts with conditionals (
OP_IF
etc.) and splitting them up into multiple scripts (each corresponding to one execution path through the original script), it is generally preferable to pick the latter. - When a single condition requires signatures with multiple keys, key aggregation techniques like MuSig can be used to combine them into a single key. The details are out of scope for this document, but note that this may complicate the signing procedure.
- If one or more of the spending conditions consist of just a single key (after aggregation), the most likely one should be made the internal key. If no such condition exists, it may be worthwhile adding one that consists of an aggregation of all keys participating in all scripts combined; effectively adding an "everyone agrees" branch. If that is inacceptable, pick as internal key a point with unknown discrete logarithm. One example of such a point is H = lift_x(0x0250929b74c1a04954b78b4b6035e97a5e078a5a0f28ec96d547bfee9ace803ac0) which is constructed by taking the hash of the standard uncompressed encoding of the secp256k1 base point G as X coordinate. In order to avoid leaking the information that key path spending is not possible it is recommended to pick a fresh integer r in the range 0...n-1 uniformly at random and use H + rG as internal key. It is possible to prove that this internal key does not have a known discrete logarithm with respect to G by revealing r to a verifier who can then reconstruct how the internal key was created.
- If the spending conditions do not require a script path, the output key should commit to an unspendable script path instead of having no script path. This can be achieved by computing the output key point as Q = P + int(hashTapTweak(bytes(P)))G. [22]
- The remaining scripts should be organized into the leaves of a binary tree. This can be a balanced tree if each of the conditions these scripts correspond to are equally likely. If probabilities for each condition are known, consider constructing the tree as a Huffman tree.
internal_pubkey
and a binary tree whose leaves are (leaf_version, script) tuples, the output script can be computed using the Python3 algorithms below. These algorithms take advantage of helper functions from the [bip-0340/referency.py] for integer conversion, point multiplication, and tagged hashes.
First, we define taproot_tweak_pubkey
for 32-byte BIP340 public key arrays.
The function returns a bit indicating the tweaked public key's Y coordinate as well as the public key byte array.
The parity bit will be required for spending the output with a script path.
In order to allow spending with the key path, we define taproot_tweak_seckey
to compute the secret key for a tweaked public key.
For any byte string h
it holds that taproot_tweak_pubkey(pubkey_gen(seckey), h)[0] == pubkey_gen(taproot_tweak_seckey(seckey, h))
.
def taproot_tweak_pubkey(pubkey, h):
t = int_from_bytes(tagged_hash("TapTweak", pubkey + h))
if t >= SECP256K1_ORDER:
raise ValueError
Q = point_add(lift_x(int_from_bytes(pubkey)), point_mul(G, t))
return 0 if has_even_y(Q) else 1, bytes_from_int(x(Q))
def taproot_tweak_seckey(seckey0, h):
P = point_mul(G, int_from_bytes(seckey0))
seckey = seckey0 if has_even_y(P) else SECP256K1_ORDER - seckey0
t = int_from_bytes(tagged_hash("TapTweak", bytes_from_int(x(P)) + h))
if t >= SECP256K1_ORDER:
raise ValueError
return (seckey + t) % SECP256K1_ORDER
The following function, taproot_output_script
, returns a byte array with the scriptPubKey (see BIP141).
ser_script
refers to a function that prefixes its input with a CompactSize-encoded length.
def taproot_tree_helper(script_tree):
if isinstance(script_tree, tuple):
leaf_version, script = script_tree
h = tagged_hash("TapLeaf", bytes([leaf_version]) + ser_script(script))
return ([((leaf_version, script), bytes())], h)
left, left_h = taproot_tree_helper(script_tree[0])
right, right_h = taproot_tree_helper(script_tree[1])
ret = [(l, c + right_h) for l, c in left] + [(l, c + left_h) for l, c in right]
if right_h < left_h:
left_h, right_h = right_h, left_h
return (ret, tagged_hash("TapBranch", left_h + right_h))
def taproot_output_script(internal_pubkey, script_tree):
"""Given a internal public key and a tree of scripts, compute the output script.
script_tree is either:
- a (leaf_version, script) tuple (leaf_version is 0xc0 for [[bip-0342.mediawiki|BIP342]] scripts)
- a list of two elements, each with the same structure as script_tree itself
- None
"""
if script_tree is None:
h = bytes()
else:
_, h = taproot_tree_helper(script_tree)
output_pubkey, _ = taproot_tweak_pubkey(internal_pubkey, h)
return bytes([0x51, 0x20]) + output_pubkey
To spend this output using script D, the control block would contain the following data in this order:
<control byte with leaf version and parity bit> <internal key p> <C> <E> <AB>
The TapTweak would then be computed as described above like so:
D = tagged_hash("TapLeaf", bytes([leaf_version]) + ser_script(script)) CD = tagged_hash("TapBranch", C + D) CDE = tagged_hash("TapBranch", E + CD) ABCDE = tagged_hash("TapBranch", AB + CDE) TapTweak = tagged_hash("TapTweak", p + ABCDE)
Spending using the key path A Taproot output can be spent with the secret key corresponding to the internal_pubkey
. To do so, a witness stack consists of a single element: a BIP340 signature on the signature hash as defined above, with the secret key tweaked by the same h
as in the above snippet. See the code below:
def taproot_sign_key(script_tree, internal_seckey, hash_type):
_, h = taproot_tree_helper(script_tree)
output_seckey = taproot_tweak_seckey(internal_seckey, h)
sig = schnorr_sign(sighash(hash_type), output_seckey)
if hash_type != 0:
sig += bytes([hash_type])
return [sig]
This function returns the witness stack necessary and a sighash
function to compute the signature hash as defined above (for simplicity, the snippet above ignores passing information like the transaction, the input position, ... to the sighashing code).
Spending using one of the scripts A Taproot output can be spent by satisfying any of the scripts used in its construction. To do so, a witness stack consisting of the script's inputs, plus the script itself and the control block are necessary. See the code below:
def taproot_sign_script(internal_pubkey, script_tree, script_num, inputs):
info, h = taproot_tree_helper(script_tree)
(leaf_version, script), path = info[script_num]
output_pubkey_y_parity, _ = taproot_tweak_pubkey(internal_pubkey, h)
pubkey_data = bytes([output_pubkey_y_parity + leaf_version]) + internal_pubkey
return inputs + [script, pubkey_data + path]
Taproot improves the privacy of Bitcoin because instead of revealing all possible conditions for spending an output, only the satisfied spending condition has to be published. Ideally, outputs are spent using the key path which prevents observers from learning the spending conditions of a coin. A key path spend could be a "normal" payment from a single- or multi-signature wallet or the cooperative settlement of hidden multiparty contract.
A script path spend leaks that there is a script path and that the key path was not applicable - for example because the involved parties failed to reach agreement. Moreover, the depth of a script in the Merkle root leaks information including the minimum depth of the tree, which suggests specific wallet software that created the output and helps clustering. Therefore, the privacy of script spends can be improved by deviating from the optimal tree determined by the probability distribution over the leaves.
Just like other existing output types, taproot outputs should never reuse keys, for privacy reasons. This does not only apply to the particular leaf that was used to spend an output but to all leaves committed to in the output. If leaves were reused, it could happen that spending a different output would reuse the same Merkle branches in the Merkle proof. Using fresh keys implies that taproot output construction does not need to take special measures to randomizing leaf positions because they are already randomized due to the branch-sorting Merkle tree construction used in taproot. This does not avoid leaking information through the leaf depth and therefore only applies to balanced (sub-) trees. In addition, every leaf should have a set of keys distinct from every other leaf. The reason for this is to increase leaf entropy and prevent an observer from learning an undisclosed script using brute-force search.
Examples with creation transaction and spending transaction pairs, valid and invalid.
Examples of preimage for sighashing for each of the sighash modes.
- ^ What does not adding security assumptions mean? Unforgeability of signatures is a necessary requirement to prevent theft. At least when treating script execution as a digital signature scheme itself, unforgeability can be proven in the Random Oracle Model assuming the Discrete Logarithm problem is hard. A proof for unforgeability of ECDSA in the current script system needs non-standard assumptions on top of that. Note that it is hard in general to model exactly what security for script means, as it depends on the policies and protocols used by wallet software.
- ^ Why is the public key directly included in the output? While typical earlier constructions store a hash of a script or a public key in the output, this is rather wasteful when a public key is always involved. To guarantee batch verifiability, the public key must be known to every verifier, and thus only revealing its hash as an output would imply adding an additional 32 bytes to the witness. Furthermore, to maintain 128-bit collision security for outputs, a 256-bit hash would be required anyway, which is comparable in size (and thus in cost for senders) to revealing the public key directly. While the usage of public key hashes is often said to protect against ECDLP breaks or quantum computers, this protection is very weak at best: transactions are not protected while being confirmed, and a very large portion of the currency's supply is not under such protection regardless. Actual resistance to such systems can be introduced by relying on different cryptographic assumptions, but this proposal focuses on improvements that do not change the security model.
- ^ Why is P2SH-wrapping not supported? Using P2SH-wrapped outputs only provides 80-bit collision security due to the use of a 160-bit hash. This is considered low, and becomes a security risk whenever the output includes data from more than a single party (public keys, hashes, ...).
- ^ Why is the first byte of the annex
0x50
? The0x50
is chosen as it could not be confused with a valid P2WPKH or P2WSH spending. As the control block's initial byte's lowest bit is used to indicate the parity of the public key's Y coordinate, each leaf version needs an even byte value and the immediately following odd byte value that are both not yet used in P2WPKH or P2WSH spending. To indicate the annex, only an "unpaired" available byte is necessary like0x50
. This choice maximizes the available options for future script versions. - ^ What is the purpose of the annex? The annex is a reserved space for future extensions, such as indicating the validation costs of computationally expensive new opcodes in a way that is recognizable without knowing the scriptPubKey of the output being spent. Until the meaning of this field is defined by another softfork, users SHOULD NOT include
annex
in transactions, or it may lead to PERMANENT FUND LOSS. - ^ Why is the Merkle path length limited to 128? The optimally space-efficient Merkle tree can be constructed based on the probabilities of the scripts in the leaves, using the Huffman algorithm. This algorithm will construct branches with lengths approximately equal to log2(1/probability), but to have branches longer than 128 you would need to have scripts with an execution chance below 1 in 2128. As that is our security bound, scripts that truly have such a low chance can probably be removed entirely.
- ^ What constraints are there on the leaf version? First, the leaf version cannot be odd as c[0] & 0xfe will always be even, and cannot be 0x50 as that would result in ambiguity with the annex. In addition, in order to support some forms of static analysis that rely on being able to identify script spends without access to the output being spent, it is recommended to avoid using any leaf versions that would conflict with a valid first byte of either a valid P2WPKH pubkey or a valid P2WSH script (that is, both v and v | 1 should be an undefined, invalid or disabled opcode or an opcode that is not valid as the first opcode). The values that comply to this rule are the 32 even values between 0xc0 and 0xfe and also 0x66, 0x7e, 0x80, 0x84, 0x96, 0x98, 0xba, 0xbc, 0xbe. Note also that this constraint implies that leaf versions should be shared amongst different witness versions, as knowing the witness version requires access to the output being spent.
- ^ Why are child elements sorted before hashing in the Merkle tree? By doing so, it is not necessary to reveal the left/right directions along with the hashes in revealed Merkle branches. This is possible because we do not actually care about the position of specific scripts in the tree; only that they are actually committed to.
- ^ Why not use a more efficient hash construction for inner Merkle nodes? The chosen construction does require two invocations of the SHA256 compression functions, one of which can be avoided in theory (see BIP98). However, it seems preferable to stick to constructions that can be implemented using standard cryptographic primitives, both for implementation simplicity and analyzability. If necessary, a significant part of the second compression function can be optimized out by specialization for 64-byte inputs.
- ^ Why is it necessary to reveal a bit in a script path spend and check that it matches the parity of the Y coordinate of Q? The parity of the Y coordinate is necessary to lift the X coordinate q to a unique point. While this is not strictly necessary for verifying the taproot commitment as described above, it is necessary to allow batch verification. Alternatively, Q could be forced to have an even Y coordinate, but that would require retrying with different internal public keys (or different messages) until Q has that property. There is no downside to adding the parity bit because otherwise the control block bit would be unused.
- ^ What are the applicable script rules in script path spends? BIP342 specifies validity rules that apply for leaf version 0xc0, but future proposals can introduce rules for other leaf versions.
- ^ Why reject unknown hash_type values? By doing so, it is easier to reason about the worst case amount of signature hashing an implementation with adequate caching must perform.
- ^ What extensions use the ext_flag mechanism? BIP342 reuses the same common signature message algorithm, but adds BIP342-specific data at the end, which is indicated using ext_flag = 1.
- ^ What is the output length of SigMsg()? The total length of SigMsg() can be computed using the following formula: 174 - is_anyonecanpay * 49 - is_none * 32 + has_annex * 32.
- ^ Why is the serialization in the signature message changed? Hashes that go into the signature message and the message itself are now computed with a single SHA256 invocation instead of double SHA256. There is no expected security improvement by doubling SHA256 because this only protects against length-extension attacks against SHA256 which are not a concern for signature messages because there is no secret data. Therefore doubling SHA256 is a waste of resources. The message computation now follows a logical order with transaction level data first, then input data and output data. This allows to efficiently cache the transaction part of the message across different inputs using the SHA256 midstate. Additionally, sub-hashes can be skipped when calculating the message (for example `sha_prevouts` if
SIGHASH_ANYONECANPAY
is set) instead of setting them to zero and then hashing them as in BIP143. Despite that, collisions are made impossible by committing to the length of the data (implicit in hash_type and spend_type) before the variable length data. - ^ Why does the signature message commit to the scriptPubKey? This prevents lying to offline signing devices about output being spent, even when the actually executed script (scriptCode in BIP143) is correct. This means it's possible to compactly prove to a hardware wallet what (unused) execution paths existed. Moreover, committing to all spent scriptPubKeys helps offline signing devices to determine the subset that belong to its own wallet. This is useful in automated coinjoins.
- ^ Why does the signature message commit to the amounts of all transaction inputs? This eliminates the possibility to lie to offline signing devices about the fee of a transaction.
- ^ Why does the signature message commit to all input nSequence if
SIGHASH_SINGLE
orSIGHASH_NONE
are set? Because setting them already makes the message commit to theprevouts
part of all transaction inputs, it is not useful to treat the nSequence any different. Moreover, this change makes nSequence consistent with the view thatSIGHASH_SINGLE
andSIGHASH_NONE
only modify the signature message with respect to transaction outputs and not inputs. - ^ Why is the input to hashTapSighash prefixed with 0x00? This prefix is called the sighash epoch, and allows reusing the hashTapSighash tagged hash in future signature algorithms that make invasive changes to how hashing is performed (as opposed to the ext_flag mechanism that is used for incremental extensions). An alternative is having them use a different tag, but supporting a growing number of tags may become undesirable.
- ^ Why can the
hash_type
not be0x00
in 65-byte signatures? Permitting that would enable malleating (by third parties, including miners) 64-byte signatures into 65-byte ones, resulting in a different `wtxid` and a different fee rate than the creator intended - ^ Why permit two signature lengths? By making the most common type of
hash_type
implicit, a byte can often be saved. - ^ Why should the output key always have a taproot commitment, even if there is no script path? If the taproot output key is an aggregate of keys, there is the possibility for a malicious party to add a script path without being noticed by the other parties. This allows to bypass the multiparty policy and to steal the coin. MuSig key aggregation does not have this issue because it already causes the internal key to be randomized. The attack works as follows: Assume Alice and Mallory want to aggregate their keys into a taproot output key without a script path. In order to prevent key cancellation and related attacks they use MSDL-pop instead of MuSig. The MSDL-pop protocol requires all parties to provide a proof of possession of their corresponding secret key and the aggregated key is just the sum of the individual keys. After Mallory receives Alice's key A, Mallory creates M = M0 + int(t)G where M0 is Mallory's original key and t allows a script path spend with internal key P = A + M0 and a script that only contains Mallory's key. Mallory sends a proof of possession of M to Alice and both parties compute output key Q = A + M = P + int(t)G. Alice will not be able to notice the script path, but Mallory can unilaterally spend any coin with output key Q.
TODO
As a soft fork, older software will continue to operate without modification. Non-upgraded nodes, however, will consider all SegWit version 1 witness programs as anyone-can-spend scripts. They are strongly encouraged to upgrade in order to fully validate the new programs.
Non-upgraded wallets can receive and send bitcoin from non-upgraded and upgraded wallets using SegWit version 0 programs, traditional pay-to-pubkey-hash, etc. Depending on the implementation non-upgraded wallets may be able to send to Segwit version 1 programs if they support sending to BIP173 Bech32 addresses.
This document is the result of discussions around script and signature improvements with many people, and had direct contributions from Greg Maxwell and others. It further builds on top of earlier published proposals such as Taproot by Greg Maxwell, and Merkle branch constructions by Russell O'Connor, Johnson Lau, and Mark Friedenbach.
The authors wish the thank Arik Sosman for suggesting to sort Merkle node children before hashes, removing the need to transfer the position in the tree, as well as all those who provided valuable feedback and reviews, including the participants of the structured reviews.