Static ip hostname and dns

adafruit_esp32spi/adafruit_esp32spi.py

@@ -37,6 +37,9 @@
 
 _SET_NET_CMD = const(0x10)
 _SET_PASSPHRASE_CMD = const(0x11)
+_SET_IP_CONFIG = const(0x14)
+_SET_DNS_CONFIG = const(0x15)
+_SET_HOSTNAME = const(0x16)
 _SET_AP_NET_CMD = const(0x18)
 _SET_AP_PASSPHRASE_CMD = const(0x19)
 _SET_DEBUG_CMD = const(0x1A)
@@ -405,6 +408,46 @@ def scan_networks(self):
                 return APs
         return None
 
+    def set_ip_config(self, ip_address, gateway, mask="255.255.255.0"):
+        """Tells the ESP32 to set ip, gateway and network mask b"\xFF"
+
+        :param str ip_address: IP address (as a string).
+        :param str gateway: Gateway (as a string).
+        :param str mask: Mask, defaults to 255.255.255.0 (as a string).
+        """
+        resp = self._send_command_get_response(
+            _SET_IP_CONFIG,
+            params=[
+                b"\x00",
+                self.unpretty_ip(ip_address),
+                self.unpretty_ip(gateway),
+                self.unpretty_ip(mask),
+            ],
+            sent_param_len_16=False,
+        )
+        return resp
+
+    def set_dns_config(self, dns1, dns2):
+        """Tells the ESP32 to set DNS
+
+        :param str dns1: DNS server 1 IP as a string.
+        :param str dns2: DNS server 2 IP as a string.
+        """
+        resp = self._send_command_get_response(
+            _SET_DNS_CONFIG, [b"\x00", self.unpretty_ip(dns1), self.unpretty_ip(dns2)]
+        )
+        if resp[0][0] != 1:
+            raise RuntimeError("Failed to set dns with esp32")
+
+    def set_hostname(self, hostname):
+        """Tells the ESP32 to set hostname for DHCP.
+
+        :param str hostname: The new host name.
+        """
+        resp = self._send_command_get_response(_SET_HOSTNAME, [hostname.encode()])
+        if resp[0][0] != 1:
+            raise RuntimeError("Failed to set hostname with esp32")
+
     def wifi_set_network(self, ssid):
         """Tells the ESP32 to set the access point to the given ssid"""
         resp = self._send_command_get_response(_SET_NET_CMD, [ssid])
@@ -518,8 +561,7 @@ def connect(self, secrets):
         self.connect_AP(secrets["ssid"], secrets["password"])
 
     def connect_AP(self, ssid, password, timeout_s=10):  # pylint: disable=invalid-name
-        """
-        Connect to an access point with given name and password.
+        """Connect to an access point with given name and password.
         Will wait until specified timeout seconds and return on success
         or raise an exception on failure.
 
@@ -552,8 +594,7 @@ def connect_AP(self, ssid, password, timeout_s=10):  # pylint: disable=invalid-n
     def create_AP(
         self, ssid, password, channel=1, timeout=10
     ):  # pylint: disable=invalid-name
-        """
-        Create an access point with the given name, password, and channel.
+        """Create an access point with the given name, password, and channel.
         Will wait until specified timeout seconds and return on success
         or raise an exception on failure.
 
@@ -814,8 +855,7 @@ def set_esp_debug(self, enabled):
             raise RuntimeError("Failed to set debug mode")
 
     def set_pin_mode(self, pin, mode):
-        """
-        Set the io mode for a GPIO pin.
+        """Set the io mode for a GPIO pin.
 
         :param int pin: ESP32 GPIO pin to set.
         :param value: direction for pin, digitalio.Direction or integer (0=input, 1=output).
@@ -831,8 +871,7 @@ def set_pin_mode(self, pin, mode):
             raise RuntimeError("Failed to set pin mode")
 
     def set_digital_write(self, pin, value):
-        """
-        Set the digital output value of pin.
+        """Set the digital output value of pin.
 
         :param int pin: ESP32 GPIO pin to write to.
         :param bool value: Value for the pin.
@@ -844,8 +883,7 @@ def set_digital_write(self, pin, value):
             raise RuntimeError("Failed to write to pin")
 
     def set_analog_write(self, pin, analog_value):
-        """
-        Set the analog output value of pin, using PWM.
+        """Set the analog output value of pin, using PWM.
 
         :param int pin: ESP32 GPIO pin to write to.
         :param float value: 0=off 1.0=full on
@@ -858,8 +896,7 @@ def set_analog_write(self, pin, analog_value):
             raise RuntimeError("Failed to write to pin")
 
     def set_digital_read(self, pin):
-        """
-        Get the digital input value of pin. Returns the boolean value of the pin.
+        """Get the digital input value of pin. Returns the boolean value of the pin.
 
         :param int pin: ESP32 GPIO pin to read from.
         """
@@ -877,8 +914,7 @@ def set_digital_read(self, pin):
         )
 
     def set_analog_read(self, pin, atten=ADC_ATTEN_DB_11):
-        """
-        Get the analog input value of pin. Returns an int between 0 and 65536.
+        """Get the analog input value of pin. Returns an int between 0 and 65536.
 
         :param int pin: ESP32 GPIO pin to read from.
         :param int atten: attenuation constant
@@ -914,6 +950,7 @@ def get_time(self):
     def set_certificate(self, client_certificate):
         """Sets client certificate. Must be called
         BEFORE a network connection is established.
+
         :param str client_certificate: User-provided .PEM certificate up to 1300 bytes.
         """
         if self._debug:
@@ -936,6 +973,7 @@ def set_certificate(self, client_certificate):
     def set_private_key(self, private_key):
         """Sets private key. Must be called
         BEFORE a network connection is established.
+
         :param str private_key: User-provided .PEM file up to 1700 bytes.
         """
         if self._debug:

adafruit_esp32spi/digitalio.py

@@ -50,6 +50,7 @@ def __init__(self, esp_pin, esp):
 
     def init(self, mode=IN):
         """Initalizes a pre-defined pin.
+
         :param mode: Pin mode (IN, OUT, LOW, HIGH). Defaults to IN.
         """
         if mode is not None:
@@ -64,6 +65,7 @@ def init(self, mode=IN):
 
     def value(self, val=None):
         """Sets ESP32 Pin GPIO output mode.
+
         :param val: Pin output level (LOW, HIGH)
         """
         if val is not None:
@@ -133,6 +135,7 @@ def deinit(self):
 
     def switch_to_output(self, value=False, drive_mode=DriveMode.PUSH_PULL):
         """Set the drive mode and value and then switch to writing out digital values.
+
         :param bool value: Default mode to set upon switching.
         :param DriveMode drive_mode: Drive mode for the output.
         """
@@ -142,6 +145,7 @@ def switch_to_output(self, value=False, drive_mode=DriveMode.PUSH_PULL):
 
     def switch_to_input(self, pull=None):
         """Sets the pull and then switch to read in digital values.
+
         :param Pull pull: Pull configuration for the input.
         """
         raise NotImplementedError(
@@ -156,6 +160,7 @@ def direction(self):
     @direction.setter
     def direction(self, pin_dir):
         """Sets the direction of the pin.
+
         :param Direction dir: Pin direction (Direction.OUTPUT or Direction.INPUT)
         """
         self.__direction = pin_dir
@@ -176,6 +181,7 @@ def value(self):
     @value.setter
     def value(self, val):
         """Sets the digital logic level of the pin.
+
         :param type value: Pin logic level.
         :param int value: Pin logic level. 1 is logic high, 0 is logic low.
         :param bool value: Pin logic level. True is logic high, False is logic low.
@@ -195,8 +201,9 @@ def drive_mode(self):
     @drive_mode.setter
     def drive_mode(self, mode):
         """Sets the pin drive mode.
+
         :param DriveMode mode: Defines the drive mode when outputting digital values.
-            Either PUSH_PULL or OPEN_DRAIN
+                               Either PUSH_PULL or OPEN_DRAIN
         """
         if mode is DriveMode.OPEN_DRAIN:
             raise NotImplementedError(

examples/esp32spi_ipconfig.py

@@ -0,0 +1,89 @@
+# SPDX-FileCopyrightText: 2019 ladyada for Adafruit Industries
+# SPDX-License-Identifier: MIT
+
+import time
+import board
+import busio
+from digitalio import DigitalInOut
+import adafruit_esp32spi.adafruit_esp32spi_socket as socket
+from adafruit_esp32spi import adafruit_esp32spi
+
+# Get wifi details and more from a secrets.py file
+try:
+    from secrets import secrets
+except ImportError:
+    print("WiFi secrets are kept in secrets.py, please add them there!")
+    raise
+
+HOSTNAME = "esp32-spi-hostname-test"
+
+IP_ADDRESS = "192.168.1.111"
+GATEWAY_ADDRESS = "192.168.1.1"
+SUBNET_MASK = "255.255.255.0"
+
+UDP_IN_ADDR = "192.168.1.1"
+UDP_IN_PORT = 5500
+
+UDP_TIMEOUT = 20
+
+esp32_cs = DigitalInOut(board.CS1)
+esp32_ready = DigitalInOut(board.ESP_BUSY)
+esp32_reset = DigitalInOut(board.ESP_RESET)
+
+spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
+
+esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
+socket.set_interface(esp)
+
+s_in = socket.socket(type=socket.SOCK_DGRAM)
+s_in.settimeout(UDP_TIMEOUT)
+print("set hostname:", HOSTNAME)
+esp.set_hostname(HOSTNAME)
+
+if esp.status == adafruit_esp32spi.WL_IDLE_STATUS:
+    print("ESP32 found and in idle mode")
+print("Firmware vers.", esp.firmware_version)
+print("MAC addr:", [hex(i) for i in esp.MAC_address])
+
+print("Connecting to AP...")
+while not esp.is_connected:
+    try:
+        esp.connect_AP(secrets["ssid"], secrets["password"])
+    except RuntimeError as e:
+        print("could not connect to AP, retrying: ", e)
+        continue
+print("Connected to", str(esp.ssid, "utf-8"), "\tRSSI:", esp.rssi)
+ip1 = esp.ip_address
+
+print("set ip dns")
+esp.set_dns_config("192.168.1.1", "8.8.8.8")
+
+print("set ip config")
+esp.set_ip_config(IP_ADDRESS, GATEWAY_ADDRESS, SUBNET_MASK)
+
+time.sleep(1)
+ip2 = esp.ip_address
+
+time.sleep(1)
+info = esp.network_data
+print(
+    "get network_data: ",
+    esp.pretty_ip(info["ip_addr"]),
+    esp.pretty_ip(info["gateway"]),
+    esp.pretty_ip(info["netmask"]),
+)
+
+IP_ADDR = esp.pretty_ip(esp.ip_address)
+print("ip:", IP_ADDR)
+print("My IP address is", esp.pretty_ip(esp.ip_address))
+print("udp in addr: ", UDP_IN_ADDR, UDP_IN_PORT)
+
+socketaddr_udp_in = socket.getaddrinfo(UDP_IN_ADDR, UDP_IN_PORT)[0][4]
+s_in.connect(socketaddr_udp_in, conntype=esp.UDP_MODE)
+print("connected local UDP")
+
+while True:
+    data = s_in.recv(1205)
+    if len(data) >= 1:
+        data = data.decode("utf-8")
+        print(len(data), data)