actual code

src/Adafruit_ThinkInk.h

@@ -21,6 +21,7 @@
 #include "panels/ThinkInk_213_Grayscale4_T5.h"
 #include "panels/ThinkInk_270_Grayscale4_W3.h"
 #include "panels/ThinkInk_290_Grayscale4_T5.h"
+#include "panels/ThinkInk_290_Grayscale4_T94.h"
 #include "panels/ThinkInk_420_Grayscale4_T2.h"
 
 #include "panels/ThinkInk_154_Mono_D27.h"
@@ -31,7 +32,6 @@
 #include "panels/ThinkInk_213_Mono_BN.h"
 #include "panels/ThinkInk_213_Mono_M21.h"
 #include "panels/ThinkInk_290_Mono_BN.h"
-#include "panels/ThinkInk_290_Mono_T94.h"
 #include "panels/ThinkInk_290_Mono_M06.h"
 #include "panels/ThinkInk_420_Mono_BN.h"
 #include "panels/ThinkInk_420_Mono_M06.h"

src/drivers/Adafruit_SSD1680.h

@@ -30,6 +30,8 @@
 #define SSD1680_SET_RAMYPOS 0x45
 #define SSD1680_SET_RAMXCOUNT 0x4E
 #define SSD1680_SET_RAMYCOUNT 0x4F
+#define SSD1680_SET_ANALOGBLOCKCTRL 0x74
+#define SSD1680_SET_DIGITBLOCKCTRL 0x74
 
 /**************************************************************************/
 /*!

src/panels/ThinkInk_290_Grayscale4_T94.h

@@ -0,0 +1,129 @@
+#ifndef _THINKINK_290_GRAY4_T94_H
+#define _THINKINK_290_GRAY4_T94_H
+
+// This file is #included by Adafruit_ThinkInk.h and does not need to
+// #include anything else to pick up the EPD header or ink mode enum.
+
+const uint8_t ti_290t94_gray4_lut_code[153] = {
+    0x40, 0x48, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x8, 0x48, 0x10, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x2, 0x48, 0x4, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x20, 0x48, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0xA, 0x19, 0x0, 0x3, 0x8, 0x0, 0x0,
+    0x14, 0x1, 0x0, 0x14, 0x1, 0x0, 0x3,
+    0xA, 0x3, 0x0, 0x8, 0x19, 0x0, 0x0,
+    0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x0, 0x0, 0x0,
+};
+
+static const uint8_t ti_290t94_monofull_init_code[] {
+  SSD1680_SW_RESET, 0, // soft reset
+    0xFF, 20,          // busy wait
+    SSD1680_DATA_MODE, 1, 0x03, // Ram data entry mode
+    SSD1680_WRITE_BORDER, 1, 0x05, //BorderWavefrom
+
+    SSD1680_WRITE_VCOM, 1, 0x36,   // Vcom Voltage
+    SSD1680_GATE_VOLTAGE, 1, 0x17, // Set gate voltage 
+    SSD1680_SOURCE_VOLTAGE, 3, 0x41, 0x00, 0x32,   // Set source voltage
+
+    SSD1680_DRIVER_CONTROL, 3, 0x27, 0x01, 0x00, //Driver output control
+    SSD1680_DISP_CTRL1, 2, 0x00, 0x80, //Display update control
+    SSD1680_TEMP_CONTROL, 1, 0x80, //Read built-in temperature sensor
+    SSD1680_SET_RAMXCOUNT, 1, 0x00, //set RAM x address count to 0
+    SSD1680_SET_RAMYCOUNT, 2, 0x27, 0x01, //set RAM y address count to 0X199
+    0xFE // EOM
+};
+
+
+static const uint8_t ti_290t94_grayfull_init_code[] {
+  SSD1680_SW_RESET, 0, // soft reset
+    0xFF, 20,          // busy wait
+    SSD1680_SET_ANALOGBLOCKCTRL, 1, 0x54, //set analog block control
+    SSD1680_SET_DIGITBLOCKCTRL, 1, 0x3B, //set digital block control
+    SSD1680_DRIVER_CONTROL, 3, 0x27, 0x01, 0x00, //Driver output control
+    SSD1680_DATA_MODE, 1, 0x01, //data entry mode
+    SSD1680_SET_RAMXPOS, 2, 0x00, 0x0F, //set Ram-X address start/end position
+    SSD1680_SET_RAMYPOS, 4, 0x27, 0x01, 0x00, 0x00, //set Ram-Y address start/end position
+    SSD1680_WRITE_BORDER, 1, 0x00, //BorderWavefrom
+
+    SSD1680_WRITE_VCOM, 1, 0x1C,
+    0x3F, 1, 0x22, //EOPQ
+    SSD1680_GATE_VOLTAGE, 1, 0x17, //VGH
+    SSD1680_SOURCE_VOLTAGE, 3, 0x41, 0x0, 0x32, // VSH1, VSH2, VSL
+
+    // gray LUT
+    0x32, 153, 0x40, 0x48, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x8, 0x48, 0x10, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x2, 0x48, 0x4, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x20, 0x48, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0xA, 0x19, 0x0, 0x3, 0x8, 0x0, 0x0,
+    0x14, 0x1, 0x0, 0x14, 0x1, 0x0, 0x3,
+    0xA, 0x3, 0x0, 0x8, 0x19, 0x0, 0x0,
+    0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+    0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x0, 0x0, 0x0,
+
+    SSD1680_DISP_CTRL1, 2, 0x00, 0x80, //Display update control
+    SSD1680_SET_RAMXCOUNT, 1, 0x00, //set RAM x address count to 0
+    SSD1680_SET_RAMYCOUNT, 2, 0x27, 0x01, //set RAM y address count to 0X199
+    0xFE // EOM
+};
+
+class ThinkInk_290_Grayscale4_T94 : public Adafruit_SSD1680 {
+public:
+  ThinkInk_290_Grayscale4_T94(int16_t SID, int16_t SCLK, int16_t DC, int16_t RST,
+                       int16_t CS, int16_t SRCS, int16_t MISO,
+                       int16_t BUSY = -1)
+      : Adafruit_SSD1680(296, 128, SID, SCLK, DC, RST, CS, SRCS, MISO, BUSY){};
+
+  ThinkInk_290_Grayscale4_T94(int16_t DC, int16_t RST, int16_t CS, int16_t SRCS,
+                       int16_t BUSY = -1, SPIClass *spi = &SPI)
+      : Adafruit_SSD1680(296, 128, DC, RST, CS, SRCS, BUSY, spi){};
+
+  void begin(thinkinkmode_t mode = THINKINK_MONO) {
+    Adafruit_SSD1680::begin(true);
+    setColorBuffer(0, true); // layer 0 uninverted
+    setBlackBuffer(0, true); // only one buffer
+
+    inkmode = mode; // Preserve ink mode for ImageReader or others
+
+    if (mode == THINKINK_MONO) {
+      _xram_offset = 0;
+      _epd_init_code = ti_290t94_monofull_init_code;
+
+
+      layer_colors[EPD_WHITE] = 0b00;
+      layer_colors[EPD_BLACK] = 0b01;
+      layer_colors[EPD_RED] = 0b01;
+      layer_colors[EPD_GRAY] = 0b01;
+      layer_colors[EPD_LIGHT] = 0b00;
+      layer_colors[EPD_DARK] = 0b01;
+
+      default_refresh_delay = 500;
+    }
+
+
+    setRotation(0);
+    powerDown();
+  }
+};
+
+
+#endif // _THINKINK_290_GRAY4_T94_H