Skip to content

adienes/StaticArrays.jl

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

StaticArrays

Statically sized arrays for Julia

Build Status Coverage Status codecov.io Stable Dev deps version

StaticArrays provides a framework for implementing statically sized arrays in Julia, using the abstract type StaticArray{Size,T,N} <: AbstractArray{T,N}. Subtypes of StaticArray will provide fast implementations of common array and linear algebra operations. Note that here "statically sized" means that the size can be determined from the type, and "static" does not necessarily imply immutable.

The package also provides some concrete static array types: SVector, SMatrix and SArray, which may be used as-is (or else embedded in your own type). Mutable versions MVector, MMatrix and MArray are also exported, as well as SizedArray for annotating standard Arrays with static size information. Further, the abstract FieldVector can be used to make fast StaticVectors out of any uniform Julia "struct". Full documentation can be found here.

Most of the primary array types exported by StaticArrays.jl are defined in the small interface package StaticArraysCore.jl. This includes e.g., the definitions of the abstract type StaticArray and the concrete types SArray, MArray, and SizedArray (as well as their dimension-specific aliases). This enables downstream packages to implement new methods for these types without depending on (and hence loading) the entirety of StaticArrays.jl, and thereby to avoid incurring the full load-time of StaticArrays.jl (which is on the order of 0.6 s for StaticArrays.jl v1.4 on Julia v1.7).

Speed

The speed of small SVectors, SMatrixs and SArrays is often > 10 × faster than Base.Array. For example, here's a microbenchmark showing some common operations.

============================================
    Benchmarks for 3×3 Float64 matrices
============================================
Matrix multiplication               -> 5.9x speedup
Matrix multiplication (mutating)    -> 1.8x speedup
Matrix addition                     -> 33.1x speedup
Matrix addition (mutating)          -> 2.5x speedup
Matrix determinant                  -> 112.9x speedup
Matrix inverse                      -> 67.8x speedup
Matrix symmetric eigendecomposition -> 25.0x speedup
Matrix Cholesky decomposition       -> 8.8x speedup
Matrix LU decomposition             -> 6.1x speedup
Matrix QR decomposition             -> 65.0x speedup

These numbers were generated on an Intel i7-7700HQ using Julia-1.2. As with all synthetic benchmarks, the speedups you see here should only be taken as very roughly indicative of the speedup you may see in real code. When in doubt, benchmark your real application!

Note that in the current implementation, working with large StaticArrays puts a lot of stress on the compiler, and becomes slower than Base.Array as the size increases. A very rough rule of thumb is that you should consider using a normal Array for arrays larger than 100 elements.

Quick start

Add StaticArrays from the Pkg REPL, i.e., pkg> add StaticArrays. Then:

using LinearAlgebra
using StaticArrays

# Use the convenience constructor type `SA` to create vectors and matrices
SA[1, 2, 3]      isa SVector{3,Int}
SA_F64[1, 2, 3]  isa SVector{3,Float64}
SA_F32[1, 2, 3]  isa SVector{3,Float32}
SA[1 2; 3 4]     isa SMatrix{2,2,Int}
SA_F64[1 2; 3 4] isa SMatrix{2,2,Float64}

# Create an SVector using various forms, using constructors, functions or macros
v1 = SVector(1, 2, 3)
v1.data === (1, 2, 3) # SVector uses a tuple for internal storage
v2 = SVector{3,Float64}(1, 2, 3) # length 3, eltype Float64
v3 = @SVector [1, 2, 3]
v4 = @SVector [i^2 for i = 1:10] # arbitrary comprehensions (range is evaluated at global scope)
v5 = zeros(SVector{3}) # defaults to Float64
v6 = @SVector zeros(3)
v7 = SVector{3}([1, 2, 3]) # Array conversions must specify size

# Can get size() from instance or type
size(v1) == (3,)
size(typeof(v1)) == (3,)

# Similar constructor syntax for matrices
m1 = SMatrix{2,2}(1, 2, 3, 4) # flat, column-major storage, equal to m2:
m2 = @SMatrix [ 1  3 ;
                2  4 ]
m3 = SMatrix{3,3}(1I)
m4 = @SMatrix randn(4,4)
m5 = SMatrix{2,2}([1 3 ; 2 4]) # Array conversions must specify size

# Higher-dimensional support
a = @SArray randn(2, 2, 2, 2, 2, 2)

# Supports all the common operations of AbstractArray
v7 = v1 + v2
v8 = sin.(v3)
v3 == m3 * v3 # recall that m3 = SMatrix{3,3}(1I)
# map, reduce, broadcast, map!, broadcast!, etc...

# Indexing can also be done using static arrays of integers
v1[1] === 1
v1[SVector(3,2,1)] === @SVector [3, 2, 1]
v1[:] === v1
typeof(v1[[1,2,3]]) <: Vector # Can't determine size from the type of [1,2,3]

# Is (partially) hooked into BLAS, LAPACK, etc:
rand(MMatrix{20,20}) * rand(MMatrix{20,20}) # large matrices can use BLAS
eigen(m3) # eigen(), etc uses specialized algorithms up to 3×3, or else LAPACK

# Static arrays stay statically sized, even when used by Base functions, etc:
typeof(eigen(m3).vectors) == SMatrix{3,3,Float64,9}
typeof(eigen(m3).values) == SVector{3,Float64}

# similar() returns a mutable container, while similar_type() returns a constructor:
typeof(similar(m3)) == MArray{Tuple{3,3},Int64,2,9} # (final parameter is length = 9)
similar_type(m3) == SArray{Tuple{3,3},Int64,2,9}

# The Size trait is a compile-time constant representing the size
Size(m3) === Size(3,3)

# A standard Array can be wrapped into a SizedArray
m4 = SizedMatrix{3,3}(rand(3,3))
inv(m4) # Take advantage of specialized fast methods

# reshape() uses Size() or types to specify size:
reshape([1,2,3,4], Size(2,2)) == @SMatrix [ 1  3 ;
                                            2  4 ]
typeof(reshape([1,2,3,4], Size(2,2))) === SizedArray{Tuple{2, 2},Int64,2,1}

Approach

The package provides a range of different useful built-in StaticArray types, which include mutable and immutable arrays based upon tuples, arrays based upon structs, and wrappers of Array. There is a relatively simple interface for creating your own, custom StaticArray types, too.

This package also provides methods for a wide range of AbstractArray functions, specialized for (potentially immutable) StaticArrays. Many of Julia's built-in method definitions inherently assume mutability, and further performance optimizations may be made when the size of the array is known to the compiler. One example of this is by loop unrolling, which has a substantial effect on small arrays and tends to automatically trigger LLVM's SIMD optimizations. Another way performance is boosted is by providing specialized methods for det, inv, eigen and cholesky where the algorithm depends on the precise dimensions of the input. In combination with intelligent fallbacks to the methods in Base, we seek to provide a comprehensive support for statically sized arrays, large or small, that hopefully "just works".

About

Statically sized arrays for Julia

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Julia 100.0%