libsecp256k1-vrf

Optimized C library for ECDSA signatures and secret/public key operations on curve secp256k1.

This library is intended to be the highest quality publicly available library for cryptography on the secp256k1 curve. However, the primary focus of its development has been for usage in the Bitcoin system and usage unlike Bitcoin's may be less well tested, verified, or suffer from a less well thought out interface. Correct usage requires some care and consideration that the library is fit for your application's purpose.

Features:

• secp256k1 ECDSA signing/verification and key generation.
• Additive and multiplicative tweaking of secret/public keys.
• Serialization/parsing of secret keys, public keys, signatures.
• Constant time, constant memory access signing and public key generation.
• Derandomized ECDSA (via RFC6979 or with a caller provided function.)
• Very efficient implementation.
• Suitable for embedded systems.
• Optional module for public key recovery.
• Optional module for ECDH key exchange (experimental).

Experimental features have not received enough scrutiny to satisfy the standard of quality of this library but are made available for testing and review by the community. The APIs of these features should not be considered stable.

Implementation details

• General
  • No runtime heap allocation.
  • Extensive testing infrastructure.
  • Structured to facilitate review and analysis.
  • Intended to be portable to any system with a C89 compiler and uint64_t support.
  • No use of floating types.
  • Expose only higher level interfaces to minimize the API surface and improve application security. ("Be difficult to use insecurely.")
• Field operations
  • Optimized implementation of arithmetic modulo the curve's field size (2^256 - 0x1000003D1).
    • Using 5 52-bit limbs (including hand-optimized assembly for x86_64, by Diederik Huys).
    • Using 10 26-bit limbs (including hand-optimized assembly for 32-bit ARM, by Wladimir J. van der Laan).
  • Field inverses and square roots using a sliding window over blocks of 1s (by Peter Dettman).
• Scalar operations
  • Optimized implementation without data-dependent branches of arithmetic modulo the curve's order.
    • Using 4 64-bit limbs (relying on __int128 support in the compiler).
    • Using 8 32-bit limbs.
• Group operations
  • Point addition formula specifically simplified for the curve equation (y^2 = x^3 + 7).
  • Use addition between points in Jacobian and affine coordinates where possible.
  • Use a unified addition/doubling formula where necessary to avoid data-dependent branches.
  • Point/x comparison without a field inversion by comparison in the Jacobian coordinate space.
• Point multiplication for verification (aP + bG).
  • Use wNAF notation for point multiplicands.
  • Use a much larger window for multiples of G, using precomputed multiples.
  • Use Shamir's trick to do the multiplication with the public key and the generator simultaneously.
  • Optionally (off by default) use secp256k1's efficiently-computable endomorphism to split the P multiplicand into 2 half-sized ones.
• Point multiplication for signing
  • Use a precomputed table of multiples of powers of 16 multiplied with the generator, so general multiplication becomes a series of additions.
  • Intended to be completely free of timing sidechannels for secret-key operations (on reasonable hardware/toolchains)
    • Access the table with branch-free conditional moves so memory access is uniform.
    • No data-dependent branches
  • Optional runtime blinding which attempts to frustrate differential power analysis.
  • The precomputed tables add and eventually subtract points for which no known scalar (secret key) is known, preventing even an attacker with control over the secret key used to control the data internally.

Build steps

libsecp256k1 is built using autotools:

$ ./autogen.sh
$ ./configure
$ make
$ make check
$ sudo make install  # optional

Building for iOS:

$ ./autogen.sh
$ ./makeios

The libraries will be on the ios folder

Exhaustive tests

$ ./exhaustive_tests

With valgrind, you might need to increase the max stack size:

$ valgrind --max-stackframe=2500000 ./exhaustive_tests

Test coverage

This library aims to have full coverage of the reachable lines and branches.

To create a test coverage report, configure with --enable-coverage (use of GCC is necessary):

$ ./configure --enable-coverage

Run the tests:

$ make check

To create a report, gcovr is recommended, as it includes branch coverage reporting:

$ gcovr --exclude 'src/bench*' --print-summary

To create a HTML report with coloured and annotated source code:

$ gcovr --exclude 'src/bench*' --html --html-details -o coverage.html

Reporting a vulnerability

See SECURITY.md

Verifiable Random Function (VRF)

This library has an implementation of an ECVRF based on the IETF draft 05 using the secp256k1 curve, SHA256 as hash function and try-and-increment as hash to curve method (cipher suite SECP256K1_SHA256_TAI). The cipher suite code used is 0xFE for compatibility with other implementations.

It was implemented as a fork because the parent library does not export the required functions.

Example usage:

Proving

  unsigned char proof[81];
  char *msg = "sample";
  size_t msglen = strlen(msg);

  success = secp256k1_vrf_prove(proof, seckey, &pubkey, msg, msglen);

If the prover wants to access the generated random output:

  unsigned char output[32];
  success = secp256k1_vrf_proof_to_hash(output, proof);

Verifying

  unsigned char output[32];
  char *msg = "sample";
  size_t msglen = strlen(msg);

  success = secp256k1_vrf_verify(output, proof, pk, msg, msglen);

For more details on usage check the tests

The library is compiled under a different name from the parent one, so both can be present on the same device.

Including the header:

#include "secp256k1-vrf.h"

Linking to the library:

gcc file.c -lsecp256k1-vrf