🎉 Source intercom: migration to CDK

airbyte-integrations/connectors/source-intercom/.dockerignore

@@ -0,0 +1,7 @@
+*
+!Dockerfile
+!Dockerfile.test
+!main.py
+!source_intercom
+!setup.py
+!secrets

airbyte-integrations/connectors/source-intercom/Dockerfile

@@ -0,0 +1,16 @@
+FROM python:3.7-slim
+
+# Bash is installed for more convenient debugging.
+RUN apt-get update && apt-get install -y bash && rm -rf /var/lib/apt/lists/*
+
+WORKDIR /airbyte/integration_code
+COPY source_intercom ./source_intercom
+COPY main.py ./
+COPY setup.py ./
+RUN pip install .
+
+ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
+ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
+
+LABEL io.airbyte.version=0.1.0
+LABEL io.airbyte.name=airbyte/source-intercom

airbyte-integrations/connectors/source-intercom/README.md

@@ -0,0 +1,131 @@
+# Intercom Source
+
+This is the repository for the Intercom source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/intercom).
+
+## Local development
+
+### Prerequisites
+**To iterate on this connector, make sure to complete this prerequisites section.**
+
+#### Minimum Python version required `= 3.7.0`
+
+#### Build & Activate Virtual Environment and install dependencies
+From this connector directory, create a virtual environment:
+```
+python -m venv .venv
+```
+
+This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+development environment of choice. To activate it from the terminal, run:
+```
+source .venv/bin/activate
+pip install -r requirements.txt
+```
+If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+
+Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+should work as you expect.
+
+#### Building via Gradle
+You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
+
+To build using Gradle, from the Airbyte repository root, run:
+```
+./gradlew :airbyte-integrations:connectors:source-intercom:build
+```
+
+#### Create credentials
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/intercom)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_intercom/spec.json` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source intercom test creds`
+and place them into `secrets/config.json`.
+
+### Locally running the connector
+```
+python main.py spec
+python main.py check --config secrets/config.json
+python main.py discover --config secrets/config.json
+python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+```
+
+### Locally running the connector docker image
+
+#### Build
+First, make sure you build the latest Docker image:
+```
+docker build . -t airbyte/source-intercom:dev
+```
+
+You can also build the connector image via Gradle:
+```
+./gradlew :airbyte-integrations:connectors:source-intercom:airbyteDocker
+```
+When building via Gradle, the docker image name and tag, respectively, are the values of the `io.airbyte.name` and `io.airbyte.version` `LABEL`s in
+the Dockerfile.
+
+#### Run
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-intercom:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-intercom:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-intercom:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-intercom:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+## Testing
+Make sure to familiarize yourself with [pytest test discovery](https://docs.pytest.org/en/latest/goodpractices.html#test-discovery) to know how your test files and methods should be named.
+First install test dependencies into your virtual environment:
+```
+pip install .[tests]
+```
+### Unit Tests
+To run unit tests locally, from the connector directory run:
+```
+python -m pytest unit_tests
+```
+
+### Integration Tests
+There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).
+#### Custom Integration tests
+Place custom tests inside `integration_tests/` folder, then, from the connector root, run
+```
+python -m pytest integration_tests
+```
+#### Acceptance Tests
+Customize `acceptance-test-config.yml` file to configure tests. See [Source Acceptance Tests](source-acceptance-tests.md) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+To run your integration tests with acceptance tests, from the connector root, run
+```
+python -m pytest integration_tests -p integration_tests.acceptance
+```
+To run your integration tests with docker
+
+### Using gradle to run tests
+All commands should be run from airbyte project root.
+To run unit tests:
+```
+./gradlew :airbyte-integrations:connectors:source-intercom:unitTest
+```
+To run acceptance and custom integration tests:
+```
+./gradlew :airbyte-integrations:connectors:source-intercom:integrationTest
+```
+
+## Dependency Management
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list
+
+### Publishing a new version of the connector
+You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?
+1. Make sure your changes are passing unit and integration tests.
+1. Bump the connector version in `Dockerfile` -- just increment the value of the `LABEL io.airbyte.version` appropriately (we use [SemVer](https://semver.org/)).
+1. Create a Pull Request.
+1. Pat yourself on the back for being an awesome contributor.
+1. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.

airbyte-integrations/connectors/source-intercom/acceptance-test-config.yml

@@ -0,0 +1,26 @@
+# See [Source Acceptance Tests](https://docs.airbyte.io/contributing-to-airbyte/building-new-connector/source-acceptance-tests.md)
+# for more information about how to configure these tests
+connector_image: airbyte/source-intercom:dev
+tests:
+  spec:
+    - spec_path: "source_intercom/spec.json"
+  connection:
+    - config_path: "secrets/config.json"
+      status: "succeed"
+    - config_path: "integration_tests/invalid_config.json"
+      status: "failed"
+  discovery:
+    - config_path: "secrets/config.json"
+  basic_read:
+    - config_path: "secrets/config.json"
+      configured_catalog_path: "integration_tests/configured_catalog.json"
+      validate_output_from_all_streams: yes
+  incremental:
+    - config_path: "secrets/config.json"
+      configured_catalog_path: "integration_tests/configured_catalog.json"
+      future_state_path: "integration_tests/abnormal_state.json"
+      cursor_paths:
+        charges: [ "updated_at" ]
+  full_refresh:
+    - config_path: "secrets/config.json"
+      configured_catalog_path: "integration_tests/configured_catalog.json"

airbyte-integrations/connectors/source-intercom/acceptance-test-docker.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env sh
+docker run --rm -it \
+    -v /var/run/docker.sock:/var/run/docker.sock \
+    -v /tmp:/tmp \
+    -v $(pwd):/test_input \
+    airbyte/source-acceptance-test \
+    --acceptance-test-config /test_input

airbyte-integrations/connectors/source-intercom/build.gradle

@@ -0,0 +1,14 @@
+plugins {
+    id 'airbyte-python'
+    id 'airbyte-docker'
+    id 'airbyte-source-acceptance-test'
+}
+
+airbytePython {
+    moduleDirectory 'source_intercom'
+}
+
+dependencies {
+    implementation files(project(':airbyte-integrations:bases:source-acceptance-test').airbyteDocker.outputs)
+    implementation files(project(':airbyte-integrations:bases:base-python').airbyteDocker.outputs)
+}

airbyte-integrations/connectors/source-intercom/integration_tests/abnormal_state.json

@@ -0,0 +1,21 @@
+{
+  "companies": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  },
+  "company_segments": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  },
+  "conversations": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  },
+  "conversation_parts": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  },
+  "contacts": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  },
+  "segments": {
+    "updated_at": "2022-07-12T10:44:09+00:00"
+  }
+}
+

airbyte-integrations/connectors/source-intercom/integration_tests/acceptance.py

@@ -0,0 +1,34 @@
+# MIT License
+#
+# Copyright (c) 2020 Airbyte
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+
+
+import pytest
+
+pytest_plugins = ("source_acceptance_test.plugin",)
+
+
+@pytest.fixture(scope="session", autouse=True)
+def connector_setup():
+    """ This fixture is a placeholder for external resources that acceptance test might require."""
+    # TODO: setup test dependencies if needed. otherwise remove the TODO comments
+    yield
+    # TODO: clean up test dependencies