RFID RC232 This program is designed to read the NFC tags using RFID RC232.
Getting Started The following instructions will help you get a copy of the project up and running on your local machine.
Prerequisites
- Windows Operating System
- Microsoft Visual Studio
- RFID RC232 device connected to COM13 port
Installing
- Clone this repository.
- Open RFID_RC232.sln file in Microsoft Visual Studio.
- Compile and run the application.
Running the Program When you run this program, it will open a connection between your computer and an RFID RC232 device connected to COM13 port. The program uses UART communication protocol for serial communication with the device. After opening a connection with the device, it sends commands like GET_CARD_ID or GET_CARD_ID_EX activation sequence to read NFC tags from its memory by reading bytes from UART buffer. Then, it reads data in chunks of 16 bytes (where first 4 are BOOTLOADER ACK, second 7 are RESPONSE, third 4 are DATA & fourth one is CHECKSUM byte) sent back by RFID reader and displays them as output on console window.
Built With
- C programming language
Authors aleksa012po