Skip to content
This repository has been archived by the owner on Sep 2, 2022. It is now read-only.

alkamid/scalingeth-gradient

Repository files navigation

Gradient Dao Scalling ETH L2

The Official™ Optimism Tutorial

Discord Twitter Follow

This tutorial is an introduction to the process of developing applications on Optimistic Ethereum. We'll take you through the process of compiling, testing, and deploying a smart contract.

This tutorial aims to highlight the similarities and differences between Ethereum and Optimistic Ethereum. To that end, we've set the tutorial up so that you'll perform the same compile/test/deploy process on both systems at the same time. This process is not necessary for you to build an application on Optimistic Ethereum -- it's purely to give a side-by-side comparison.

Lastly, this tutorial does not cover topics such as message passing between Ethereum (layer 1) and Optimistic Ethereum (layer 2). So, if you'd like to see an implementation on message passing, check out our l1-l2-deposit-withdrawal example repository.

With that said, let's dive in!

Prerequisite Software

Please make sure you've installed the following before continuing:

Setting Up

We've structured this tutorial as a follow-along exercise where we'll be writing code in tandem. Please clone and enter this repository:

git clone https://github.com/ethereum-optimism/optimism-tutorial
cd optimism-tutorial

We're using an Ethereum development framework called Hardhat to make our lives a lot easier. If you haven't used Hardhat before, we hope you'll be pleasantly surprised! Hardhat is well designed and full of useful features. Go ahead and set up Hardhat by running (along with our other dependencies):

yarn install

The Task

First, we're going to be deploying an ERC20 contract (written in Solidity) to Ethereum. After deploying to Ethereum, we'll deploy the same contract to Optimistic Ethereum. We've already gone ahead and written that contract for you, which you should be able to locate in optimism-tutorial/contracts/ERC20.sol. This contract is just a relatively standard (though completely unsafe) ERC20 implementation.

(Note: Seriously! This implementation is unsafe! Don't use it in production!)

Step 1: Compiling your contracts

Compiling an Ethereum contract

Just like with any other project, we'll first need to compile our Solidity into EVM bytecode. Let's compile our ERC20 contract by running the following command:

npx hardhat compile

You should now see a new folder, artifacts, which has some JSON files in it. If you can see this folder you're ready to move onto the next section!

Compiling an Optimistic Ethereum contract

Compiling a contract for Optimistic Ethereum is pretty easy! First we'll need to install the @eth-optimism/hardhat-ovm package (ovm stands for the Optimistic Virtual Machine, as opposed to the Ethereum Virtual Machine):

yarn add @eth-optimism/hardhat-ovm

Next we just need to add this line to hardhat.config.js:

// hardhat.config.js

require('@eth-optimism/hardhat-ovm')

module.exports = {
  ...

We'll also have to add optimism to your list of networks within hardhat.config.js:

// hardhat.config.js

require('@eth-optimism/hardhat-ovm')

module.exports = {
  networks: {
    ...

    // Add this network to your config!
    optimism: {
      url: 'http://127.0.0.1:8545',
      accounts: {
        mnemonic: 'test test test test test test test test test test test junk'
      },
      // This sets the gas price to 0 for all transactions on L2. We do this
      // because account balances are not automatically initiated with an ETH
      // balance (yet, sorry!).
      gasPrice: 0,
      ovm: true // This sets the network as using the ovm and ensure contract will be compiled against that.
    }
  },

  ...
}

And we're ready to compile! You'll just need to add the --network optimism option to hardhat compile:

npx hardhat --network optimism compile

Yep, it's that easy. You can verify that everything went well by looking for the artifacts-ovm and cache-ovm directories. Here, artifacts-ovm signifies that the contracts contained in this directory have been compiled for the OVM. Now let's move on to testing!

Step 2: Testing your contracts

Testing an Ethereum contract

Alright, this step is pretty straightforward. You'll probably want to test your contracts before you deploy them (lol). Let's see how you'd do that with Hardhat for a standard Ethereum contract.

Testing with Hardhat is easy. We've included a simple set of ERC20 tests inside optimism-tutorial/test/erc20.test.js. Let's run these tests with hardhat:

npx hardhat test

If everything is going as planned, you should see a bunch of green checkmarks.

Testing an Optimistic Ethereum contract

Woot! It's finally time to test our contract on top of Optimistic Ethereum. But first we'll need to get a local version of Optimistic Ethereum node running...


Fortunately, we have some handy dandy tools that make it easy to spin up a local Optimistic Ethereum node!

Since we're going to be using Docker, make sure that Docker is installed on your machine prior to moving on (info on how to do that here). We recommend opening up a second terminal for this part. This way you'll be able to keep the Optimistic Ethereum node running so you can execute some contract tests.

Now we just need to download, build, and install our Optimistic Ethereum node by running the following commands. Please note that docker-compose build will take a while. We're working on improving this (sorry)!

git clone git@github.com:ethereum-optimism/optimism.git
cd optimism
yarn install
yarn build
cd ops
docker-compose build
docker-compose up

You now have your very own locally deployed instance of Optimistic Ethereum! 🙌


With your local instance of Optimistic Ethereum up and running, let's go test your contracts!

npx hardhat --network optimism test

Again we're using the --network optimism option to let hardhat know that we want to use the Optimistic Ethereum solidity compiler. This also ensures that transactions are sent to our L2 node (instead of hardhat's local L1 node).

Go ahead and run that command. You should see another set of passing tests. If so, congrats! You're ready to deploy an application to Optimistic Ethereum. It really is that easy.

Step 3: Deploying your contracts

Deploying an Ethereum contract

Going through this routine one more time. Now we're going to deploy an Ethereum contract using hardhat. We've installed and set up a tool called hardhat-deploy to manage this mini deployment. You'll need to run:

npx hardhat deploy

This should do a deployment against a local (in-memory) Ethereum node. Cool.

Deploying an Optimistic Ethereum contract

Next we'll do the same thing on Optimistic Ethereum. Let's go ahead and deploy this contract:

npx hardhat --network optimism deploy

And once again we're using the --network optimism option. After a few seconds your contract should be deployed!

And uh... yeah. That's pretty much it. Contracts deployed! Tutorial complete. Hopefully now you know the basics of working with Optimistic Ethereum.

The primary goal of this tutorial was to try to highlight the similarities between the process of working with Ethereum and of working with Optimistic Ethereum. Did we do a decent job? Could this tutorial be improved? Please let us know by creating an issue on GitHub or by leaving a message over on discord.

Want to try deploying contracts to the Optimistic Ethereum testnet next? Check out the full integration guide on the Optimism community hub.

Until next time...

optimism-tutorial-completion

About

Scaling Ethereum hackathon submission

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 3

  •  
  •  
  •