fix(BLE): Zephyr: enable aes driver when BT selected. (#1268) #5489
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ############################################################################### | |
| # | |
| # Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by | |
| # Analog Devices, Inc.), | |
| # Copyright (C) 2023-2024 Analog Devices, Inc. | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| ############################################################################## | |
| name: Build_Examples | |
| concurrency: | |
| group: ${{ github.workflow }}-${{ github.ref }} | |
| cancel-in-progress: true | |
| # Controls when the workflow will run | |
| on: | |
| # Triggers the workflow on push or pull request events but only for the "main" branch | |
| push: | |
| branches: [ "main" ] | |
| pull_request: | |
| branches: [ "main" ] | |
| # Allows you to run this workflow manually from the Actions tab | |
| workflow_dispatch: | |
| # A workflow run is made up of one or more jobs that can run sequentially or in parallel | |
| jobs: | |
| Build_Examples: | |
| # The type of runner that the job will run on | |
| runs-on: | |
| - ubuntu-latest | |
| env: | |
| SOURCE_BRANCH: ${{github.ref_name}} | |
| TARGET_BRANCH: ${{github.event.pull_request.base.ref}} | |
| steps: | |
| # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it | |
| - uses: actions/checkout@v4 | |
| with: | |
| # Update the submodules below, doing so here will convert ssh to https | |
| submodules: false | |
| fetch-depth: 0 | |
| ref: '${{ github.event.pull_request.head.ref }}' | |
| repository: '${{ github.event.pull_request.head.repo.full_name }}' | |
| - name: Get changed files | |
| id: changed-files | |
| uses: tj-actions/changed-files@v45 | |
| with: | |
| files: | | |
| **.c | |
| **.h | |
| **.S | |
| **.s | |
| **.a | |
| **.cpp | |
| **.mk | |
| **/Makefile | |
| - name: List all changed files | |
| env: | |
| ALL_CHANGED_FILES: ${{ steps.changed-files.outputs.all_changed_files }} | |
| run: | | |
| echo ${ALL_CHANGED_FILES} > changed_files | |
| cat changed_files | |
| - name: Check watch files | |
| id: check_watch | |
| run: | | |
| echo SOURCE_BRANCH = $SOURCE_BRANCH | |
| echo TARGET_BRANCH = $TARGET_BRANCH | |
| # Determine if we need to run the test | |
| RUN_TEST=0 | |
| # Always run test if a workflow_dispatch | |
| if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then | |
| RUN_TEST=1 | |
| fi | |
| if [[ $SOURCE_BRANCH == "main" ]]; then | |
| echo "Pushed to main, running test" | |
| RUN_TEST=1 | |
| fi | |
| # Check for changes made to these files | |
| WATCH_FILES="\ | |
| Build_Examples.yml \ | |
| .c \ | |
| .cpp \ | |
| .S \ | |
| .s \ | |
| .h \ | |
| .a \ | |
| .mk \ | |
| makefile \ | |
| Makefile" | |
| if [[ -n $TARGET_BRANCH ]]; then | |
| # We are in a PR. Need to check changes against the target branch. | |
| echo "Comparing PR against target branch: $TARGET_BRANCH" | |
| echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'" | |
| git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY | |
| echo "Fetching $TARGET_BRANCH" | |
| git fetch upstream $TARGET_BRANCH | |
| echo "diffing files" | |
| CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH) | |
| fi | |
| echo "Watching these locations and files" | |
| echo $WATCH_FILES | |
| echo "Checking the following changes" | |
| echo $CHANGE_FILES | |
| for watch_file in $WATCH_FILES; do | |
| for change_file in $CHANGE_FILES; do | |
| if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then | |
| echo "Match found. Watch type: $watch_file, File: $change_file" | |
| RUN_TEST=1 | |
| fi | |
| done | |
| done | |
| # End the test early if there wasn't a significant change | |
| if [[ $RUN_TEST -eq 0 ]]; then | |
| echo "Skipping Build" | |
| else | |
| echo "Running Build" | |
| fi | |
| echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT | |
| - name: Install ARM GCC Toolchain (arm-none-eabi-gcc) | |
| uses: carlosperate/arm-none-eabi-gcc-action@v1 | |
| id: arm-none-eabi-gcc-action | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| with: | |
| release: '10.3-2021.10' # <-- The compiler release to use | |
| - name: Install RISCV GCC Toolchain (riscv-none-embed-gcc) | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # Install RISCV tools | |
| npm install --global xpm@latest | |
| TOOL_VER=10.2.0-1.2.1 | |
| xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER | |
| cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc | |
| # Add riscv tools to path | |
| echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH | |
| - name: Install RISCV GCC Toolchain (riscv-none-elf-gcc) | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # Install RISCV tools (updated) | |
| npm install --global xpm@latest | |
| # https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc | |
| TOOL_VER=12.2.0-3.1 | |
| xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER | |
| cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc | |
| # Add riscv tools to path | |
| echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH | |
| - name: Install ccache | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # Install ccache | |
| sudo apt install -y ccache | |
| # Prepend ccache into the PATH | |
| echo "/usr/bin" >> $GITHUB_PATH | |
| echo "/usr/lib/ccache" >> $GITHUB_PATH | |
| # Setup ccache links | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-addr2line | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ar | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-as | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c++filt | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-cpp | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-elfedit | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-g | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-10.2.1 | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ar | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-nm | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ranlib | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-dump | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-tool | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index-py | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-py | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gprof | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld.bfd | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-lto-dump | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-nm | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objcopy | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objdump | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ranlib | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-readelf | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-size | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strings | |
| sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strip | |
| sudo ln -s ../../bin/ccache /usr/bin/riscv-none-embed-gcc | |
| - name: Setup Python | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| uses: actions/setup-python@v4.5.0 | |
| with: | |
| python-version: '3.10' | |
| - name: Install packages | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: pip install -r .github/workflows/scripts/requirements.txt | |
| # Runs a set of commands using the runners shell | |
| - name: Build All Examples | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # This environment variable is required for the SBTs. | |
| # It must be set to the absolute path inside the Github repo. | |
| export MAXIM_SBT_DIR=$(pwd)/Tools/SBT | |
| # Set MAXIM_PATH to limit warnings | |
| export MAXIM_PATH=$(pwd) | |
| python .github/workflows/scripts/build.py --change_file changed_files | |
| Regression_Test_Make_3_81: | |
| runs-on: | |
| - ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| with: | |
| # Update the submodules below, doing so here will convert ssh to https | |
| submodules: false | |
| fetch-depth: 0 | |
| ref: '${{ github.event.pull_request.head.ref }}' | |
| repository: '${{ github.event.pull_request.head.repo.full_name }}' | |
| - name: Install Make 3.81 | |
| run: | | |
| # Build and install Make version 3.81. | |
| cd $GITHUB_WORKSPACE | |
| ls -la | |
| wget https://ftp.gnu.org/gnu/make/make-3.81.tar.gz | |
| tar -xvf make-3.81.tar.gz | |
| cd make-3.81 | |
| # Note: This patch is necessary to get make to build on Ubuntu-22.04. | |
| patch glob/glob.c $GITHUB_WORKSPACE/.github/workflows/patch/glob_patch.patch | |
| ./configure --prefix=$GITHUB_WORKSPACE/make-3.81 | |
| make | |
| make install | |
| # Pre-prend 3.81 to path | |
| echo "$GITHUB_WORKSPACE/make-3.81/bin:$GITHUB_PATH" > $GITHUB_PATH | |
| make --version | |
| - name: Check Make Version | |
| run: | | |
| # If this fails, there is a setup issue with the workflow. | |
| VERSION_CHECK=$(make --version | grep 3.81) | |
| if [ ! "$VERSION_CHECK" ];then | |
| exit 2 | |
| fi | |
| - name: Check watch files | |
| id: check_watch | |
| run: | | |
| echo SOURCE_BRANCH = $SOURCE_BRANCH | |
| echo TARGET_BRANCH = $TARGET_BRANCH | |
| # Determine if we need to run the test | |
| RUN_TEST=0 | |
| # Always run test if a workflow_dispatch | |
| if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then | |
| RUN_TEST=1 | |
| fi | |
| if [[ $SOURCE_BRANCH == "main" ]]; then | |
| echo "Pushed to main, running test" | |
| RUN_TEST=1 | |
| fi | |
| # Check for changes made to these files | |
| WATCH_FILES="\ | |
| Build_Examples.yml \ | |
| .c \ | |
| .cpp \ | |
| .S \ | |
| .s \ | |
| .h \ | |
| .a \ | |
| .mk \ | |
| makefile \ | |
| Makefile" | |
| if [[ -n $TARGET_BRANCH ]]; then | |
| # We are in a PR. Need to check changes against the target branch. | |
| echo "Comparing PR against target branch: $TARGET_BRANCH" | |
| echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'" | |
| git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY | |
| echo "Fetching $TARGET_BRANCH" | |
| git fetch upstream $TARGET_BRANCH | |
| echo "diffing files" | |
| CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH) | |
| fi | |
| echo "Watching these locations and files" | |
| echo $WATCH_FILES | |
| echo "Checking the following changes" | |
| echo $CHANGE_FILES | |
| for watch_file in $WATCH_FILES; do | |
| for change_file in $CHANGE_FILES; do | |
| if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then | |
| echo "Match found. Watch type: $watch_file, File: $change_file" | |
| RUN_TEST=1 | |
| fi | |
| done | |
| done | |
| # End the test early if there wasn't a significant change | |
| if [[ $RUN_TEST -eq 0 ]]; then | |
| echo "Skipping Build" | |
| else | |
| echo "Running Build" | |
| fi | |
| echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT | |
| - name: Install ARM GCC Toolchain (arm-none-eabi-gcc) | |
| uses: carlosperate/arm-none-eabi-gcc-action@v1 | |
| id: arm-none-eabi-gcc-action | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| with: | |
| release: '10.3-2021.10' # <-- The compiler release to use | |
| - name: Install RISCV GCC Toolchain (riscv-none-embed-gcc) | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # Install RISCV tools | |
| npm install --global xpm@latest | |
| TOOL_VER=10.2.0-1.2.1 | |
| xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER | |
| cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc | |
| # Add riscv tools to path | |
| echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH | |
| - name: Install RISCV GCC Toolchain (riscv-none-elf-gcc) | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # Install RISCV tools (updated) | |
| npm install --global xpm@latest | |
| # https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc | |
| TOOL_VER=12.2.0-3.1 | |
| xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER | |
| cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc | |
| # Add riscv tools to path | |
| echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH | |
| - name: Setup Python | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| uses: actions/setup-python@v4.5.0 | |
| with: | |
| python-version: '3.10' | |
| - name: Install packages | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: pip install -r .github/workflows/scripts/requirements.txt | |
| - name: Build PeriphDrivers and Hello_World | |
| if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }} | |
| run: | | |
| # This environment variable is required for the SBTs. | |
| # It must be set to the absolute path inside the Github repo. | |
| export MAXIM_SBT_DIR=$(pwd)/Tools/SBT | |
| # Set MAXIM_PATH to limit warnings | |
| export MAXIM_PATH=$(pwd) | |
| python .github/workflows/scripts/build.py --projects Hello_World | |