Merge pull request #143 from kpbush30/main

Feat: New ANTA and AVD Network Testing Labs

labs/NET_TESTING/Makefile

@@ -0,0 +1,73 @@
+.PHONY: help
+help: ## Display help message
+	@grep -E '^[0-9a-zA-Z_-]+\.*[0-9a-zA-Z_-]+:.*?## .*$$' $(MAKEFILE_LIST) | sort | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'
+
+########################################################
+# Site 1
+########################################################
+
+.PHONY: ping-site-1
+ping-site-1: ## Ping Nodes
+	ansible-playbook playbooks/ping.yml -i sites/site_1/inventory.yml -e "target_hosts=SITE1_FABRIC"
+
+.PHONY: build-site-1
+build-site-1: ## Build Configs
+	ansible-playbook playbooks/build.yml -i sites/site_1/inventory.yml -e "target_hosts=SITE1_FABRIC"
+
+.PHONY: deploy-site-1
+deploy-site-1: ## Deploy Configs via eAPI
+	ansible-playbook playbooks/deploy.yml -i sites/site_1/inventory.yml -e "target_hosts=SITE1_FABRIC"
+
+.PHONY: validate-site-1
+validate-site-1: ## Validate network state
+	ansible-playbook playbooks/validate.yml -i sites/site_1/inventory.yml -e "target_hosts=SITE1_FABRIC"
+
+.PHONY: cvp-site-1
+cvp-site-1: ## Deploy Configs via eAPI
+	ansible-playbook playbooks/cvp1.yml -i sites/site_1/inventory.yml
+
+########################################################
+# Site 2
+########################################################
+
+.PHONY: ping-site-2
+ping-site-2: ## Ping Nodes
+	ansible-playbook playbooks/ping.yml -i sites/site_2/inventory.yml -e "target_hosts=SITE2_FABRIC"
+
+.PHONY: build-site-2
+build-site-2: ## Build Configs
+	ansible-playbook playbooks/build.yml -i sites/site_2/inventory.yml -e "target_hosts=SITE2_FABRIC"
+
+.PHONY: deploy-site-2
+deploy-site-2: ## Deploy Configs via eAPI
+	ansible-playbook playbooks/deploy.yml -i sites/site_2/inventory.yml -e "target_hosts=SITE2_FABRIC"
+
+.PHONY: validate-site-2
+validate-site-2: ## Validate network state
+	ansible-playbook playbooks/validate.yml -i sites/site_2/inventory.yml -e "target_hosts=SITE2_FABRIC"
+
+.PHONY: cvp-site-2
+cvp-site-2: ## Deploy Configs via eAPI
+	ansible-playbook playbooks/cvp2.yml -i sites/site_2/inventory.yml
+
+########################################################
+# WAN & Hosts - Lab Prep
+########################################################
+
+.PHONY: preplab
+preplab: ## Deploy Configs via eAPI
+	ansible-playbook playbooks/preplab.yml -i extra_configs/inventory.yml -e "target_hosts=LAB"
+
+########################################################
+# ANTA COMMANDS
+########################################################
+
+
+.PHONY: anta-inv-site-1
+anta-inv-site-1: ## Generate ANTA Inventory
+	anta get from-ansible --ansible-inventory sites/site_1/inventory.yml -g SITE1_FABRIC -o sites/site_1/anta_inventory.yml
+
+.PHONY: anta-inv-site-2
+anta-inv-site-2: ## Generate ANTA Inventory
+	anta get from-ansible --ansible-inventory sites/site_2/inventory.yml -g SITE2_FABRIC -o sites/site_2/anta_inventory.yml
+

labs/NET_TESTING/ansible.cfg

@@ -0,0 +1,55 @@
+[defaults]
+
+# Disable host key checking by the underlying tools Ansible uses to connect to target hosts
+host_key_checking = False
+
+# Location of inventory file containing target hosts
+# inventory = ./inventory/inventory.yml
+
+# Only gather Ansible facts if explicity directed to in a given play
+gathering = explicit
+
+# Disable the creation of .retry files if a playbook fails
+retry_files_enabled = False
+
+# Path(s) to search for installed Ansible Galaxy Collections
+collections_paths = ~/.ansible/collections
+
+# Enable additional Jinja2 Extensions (https://jinja.palletsprojects.com/en/3.1.x/extensions/)
+jinja2_extensions =  jinja2.ext.loopcontrols,jinja2.ext.do,jinja2.ext.i18n
+
+# Enable the YAML callback plugin, providing much easier to read terminal output. (https://docs.ansible.com/ansible/latest/plugins/callback.html#callback-plugins)
+stdout_callback = yaml
+
+# Permit the use of callback plugins when running ad-hoc commands
+bin_ansible_callbacks = True
+
+# List of enabled callbacks. Many callbacks shipped with Ansible are not enabled by default
+callbacks_enabled = profile_roles, profile_tasks, timer
+
+# Maximum number of forks that Ansible will use to execute tasks on target hosts
+forks = 15
+
+# Disable cowsay (Why?)
+nocows = True
+
+# Disable deprecation warnings, more readable output
+deprecation_warnings = False
+
+#enable global vars
+vars_plugins_enabled = arista.avd.global_vars, host_group_vars
+
+#define global vars path
+[vars_global_vars]
+paths = ../../global_vars
+
+[paramiko_connection]
+# Automatically add the keys of target hosts to known hosts
+host_key_auto_add = True
+
+[persistent_connection]
+# Set the amount of time, in seconds, to wait for response from remote device before timing out persistent connection.
+command_timeout = 60
+
+# Set the amount of time, in seconds, that a persistent connection will remain idle before it is destroyed.
+connect_timeout = 60

labs/NET_TESTING/extra_configs/inventory.yml

@@ -0,0 +1,11 @@
+---
+LAB:
+  hosts:
+    s1-core1:
+    s1-core2:
+    s1-host1:
+    s1-host2:
+    s2-core1:
+    s2-core2:
+    s2-host1:
+    s2-host2:

labs/NET_TESTING/extra_configs/s1-core1.cfg

@@ -0,0 +1,57 @@
+! Command: show running-config
+! device: s1-core1 (cEOSLab, EOS-4.29.0.2F-29226602.42902F (engineering build))
+!
+no aaa root
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname s1-core1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+!
+management api http-commands
+   no shutdown
+!
+vlan 1000
+   name dci
+!
+radius-server host 192.168.0.1 key 7 0207165218120E
+!
+aaa group server radius atds
+   server 192.168.0.1
+!
+aaa authentication login default group atds local
+aaa authorization exec default group atds local
+aaa authorization commands all default local
+!
+interface Ethernet1
+   shutdown
+!
+interface Ethernet2
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet3
+   shutdown
+!
+interface Ethernet4
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet6
+   shutdown
+!
+interface Management0
+   ip address 192.168.0.102/24
+!
+ip routing
+!
+ntp server 192.168.0.1 iburst source Management0
+!
+ip radius source-interface Management0
+!

labs/NET_TESTING/extra_configs/s1-core2.cfg

@@ -0,0 +1,57 @@
+! Command: show running-config
+! device: s1-core2 (cEOSLab, EOS-4.29.0.2F-29226602.42902F (engineering build))
+!
+no aaa root
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname s1-core2
+dns domain atd.lab
+!
+spanning-tree mode mstp
+!
+management api http-commands
+   no shutdown
+!
+vlan 1000
+   name dci
+!
+radius-server host 192.168.0.1 key 7 0207165218120E
+!
+aaa group server radius atds
+   server 192.168.0.1
+!
+aaa authentication login default group atds local
+aaa authorization exec default group atds local
+aaa authorization commands all default local
+!
+interface Ethernet1
+   shutdown
+!
+interface Ethernet2
+   shutdown
+!
+interface Ethernet3
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet4
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet6
+   shutdown
+!
+interface Management0
+   ip address 192.168.0.103/24
+!
+ip routing
+!
+ntp server 192.168.0.1 iburst source Management0
+!
+ip radius source-interface Management0
+!

labs/NET_TESTING/extra_configs/s1-host1.cfg

@@ -0,0 +1,16 @@
+!-----------------------------------------
+! s1-host1 - Lab config
+!-----------------------------------------
+!
+interface Port-Channel1
+   no switchport
+   ip address 10.10.10.100/24
+!
+interface Ethernet1
+   channel-group 1 mode active
+!
+interface Ethernet2
+   channel-group 1 mode active
+!
+ip route 10.0.0.0/8 10.10.10.1
+!

labs/NET_TESTING/extra_configs/s1-host2.cfg

@@ -0,0 +1,16 @@
+!-----------------------------------------
+! s1-host2 - Lab config
+!-----------------------------------------
+!
+interface Port-Channel1
+   no switchport
+   ip address 10.20.20.100/24
+!
+interface Ethernet1
+   channel-group 1 mode active
+!
+interface Ethernet2
+   channel-group 1 mode active
+!
+ip route 10.0.0.0/8 10.20.20.1
+!

labs/NET_TESTING/extra_configs/s2-core1.cfg

@@ -0,0 +1,57 @@
+! Command: show running-config
+! device: s2-core1 (cEOSLab, EOS-4.29.0.2F-29226602.42902F (engineering build))
+!
+no aaa root
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname s2-core1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+!
+management api http-commands
+   no shutdown
+!
+vlan 1000
+   name dci
+!
+radius-server host 192.168.0.1 key 7 0207165218120E
+!
+aaa group server radius atds
+   server 192.168.0.1
+!
+aaa authentication login default group atds local
+aaa authorization exec default group atds local
+aaa authorization commands all default local
+!
+interface Ethernet1
+   shutdown
+!
+interface Ethernet2
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet3
+   shutdown
+!
+interface Ethernet4
+   switchport
+   switchport mode access
+   switchport access vlan 1000
+!
+interface Ethernet6
+   shutdown
+!
+interface Management0
+   ip address 192.168.0.202/24
+!
+ip routing
+!
+ntp server 192.168.0.1 iburst source Management0
+!
+ip radius source-interface Management0
+!