Cosmetic adjustement of profile.d scripts to align with motd

packages/bsp/common/etc/default/armbian-motd.dpkg-dist

@@ -6,7 +6,7 @@
 
 MOTD_DISABLE=""
 ONE_WIRE=""
-HIDE_IP_PATTERN="^dummy0|^lo"
+HIDE_IP_PATTERN="^dummy0|^lo|^docker"
 PRIMARY_INTERFACE="$(ip route | grep '^default' | sed "s/.*dev //" | cut -d" " -f1)"
 PRIMARY_DIRECTION="rx"
 STORAGE=/dev/sda1

packages/bsp/common/etc/profile.d/armbian-activate-profile-sync-daemon.sh

@@ -18,10 +18,10 @@ if [ -f "${HOME}/.activate_psd" ]; then
 		sed -i 's/#USE_OVERLAYFS=.*/USE_OVERLAYFS="yes"/' "${config_file}"
 		case $(/usr/bin/psd p 2>/dev/null | grep Overlayfs) in
 			*active*)
-				echo -e "\nConfigured profile sync daemon with overlayfs."
+				echo -e "\n Configured profile sync daemon with overlayfs."
 				;;
 			*)
-				echo -e "\nConfigured profile sync daemon."
+				echo -e "\n Configured profile sync daemon."
 				sed -i 's/USE_OVERLAYFS="yes"/#USE_OVERLAYFS="no"/' "${config_file}"
 				;;
 		esac

packages/bsp/common/etc/profile.d/armbian-check-first-login-reboot.sh

@@ -10,15 +10,15 @@
 if [ "$-" != "${-#*i}" ]; then
 	OutstandingPackages="$(grep -Ev "linux-base|linux-image" /var/run/reboot-required.pkgs 2>/dev/null)"
 	if [ -f "/var/run/.reboot_required" ]; then
-		printf "\n[\e[0;91m Kernel was updated, please reboot\x1B[0m ]\n\n"
+		printf "\n \e[0;91mKernel was updated, please reboot\x1B[0m \n\n"
 	elif [ "X${OutstandingPackages}" != "X" ]; then
 		# No kernel update involved, just regular packages like e.g. dbus require a reboot
 		Packages="$(grep -Ev "linux-base|linux-image" /var/run/reboot-required.pkgs | sort | uniq | tr '\n' ',' | sed -e 's/,/, /g' -e 's/,\ $//')"
 		OlderThanOneDay=$(find /var/run/reboot-required -mtime +1)
 	        if [ "X${OlderThanOneDay}" = "X" ]; then
-			printf "\n[\e[0;92m some packages require a reboot (${Packages})\x1B[0m ]\n\n"
+			printf "\n\e[0;92m Some packages require a reboot (${Packages})\x1B[0m\n\n"
 	        else
-			printf "\n[\e[0;91m some packages require a reboot since more than 1 day (${Packages})\x1B[0m ]\n\n"
+			printf "\n\e[0;91m Some packages require a reboot since more than 1 day (${Packages})\x1B[0m\n\n"
 	        fi
 	fi
 fi

packages/bsp/common/etc/update-motd.d/10-armbian-header

@@ -47,49 +47,47 @@ done
 KERNELID=$(uname -r)
 
 # Display software vendor logo
-echo -e "\e[0;91m$(figlet -f small " $VENDOR")\e[0m";
+echo -e "\e[1;91m$(figlet -f small " $VENDOR")\e[0m";
 
 # Display version, board, and kernel version
-echo -e " \e[1;91mv${VERSION}\x1B[0m for \e[1;93m$BOARD_NAME \x1B[0mrunning \e[1;91mArmbian Linux\x1B[0m \e[1;93m${KERNELID^}\x1B[0m"
+echo -e " \e[0;92mv${VERSION}\x1B[0m for $BOARD_NAME running Armbian Linux \e[0;92m${KERNELID^}\x1B[0m"
 
 # render image and board type
 if [[ "$IMAGE_TYPE" != "stable" ]]; then
-	[[ "$IMAGE_TYPE" == "user-built" ]] && HARDWARE_STATUS="\e[1;91mnot supported\x1B[0m (custom image)"
-	[[ "$IMAGE_TYPE" == "nightly" ]] && HARDWARE_STATUS="\e[1;91mfor advanced users\x1B[0m (rolling release)"
+	[[ "$IMAGE_TYPE" == "user-built" ]] && HARDWARE_STATUS="\e[0;91mDIY\x1B[0m (custom image)\x1B[0m"
+	[[ "$IMAGE_TYPE" == "nightly" ]] && HARDWARE_STATUS="\e[0;91mfor advanced users\x1B[0m (rolling release)\x1B[0m"
 else
-	[[ "$BOARD_TYPE" == "csc" || "$BOARD_TYPE" == "tvb" ]] && HARDWARE_STATUS="Community maintained"
-	[[ "$BOARD_TYPE" == "wip" ]] && HARDWARE_STATUS="\e[1;91mfor advanced users\x1B[0m (work in progress)"
-	[[ "$BOARD_TYPE" == "eos" ]] && HARDWARE_STATUS="\e[1;91mend of life\x1B[0m"
+	[[ "$BOARD_TYPE" == "csc" || "$BOARD_TYPE" == "tvb" ]] && HARDWARE_STATUS="\e[0;91mDIY (community maintained)\x1B[0m"
+	[[ "$BOARD_TYPE" == "wip" ]] && HARDWARE_STATUS="\e[0;91mfor advanced users\x1B[0m (work in progress)\x1B[0m"
+	[[ "$BOARD_TYPE" == "eos" ]] && HARDWARE_STATUS="\e[0;91mend of life\x1B[0m"
 fi
 
 # render distribution status
 if [[ $DISTRIBUTION_STATUS == supported ]]; then
-	DISTRO_STATUS="\e[1;92mstable\e[0m ($DISTRIBUTION_CODENAME)"
+	DISTRO_STATUS="\e[0;92mstable\e[0m ($DISTRIBUTION_CODENAME)"
 elif [[ $DISTRIBUTION_STATUS == eos ]]; then
-	DISTRO_STATUS="\e[1;91mend of life\e[0m ($DISTRIBUTION_CODENAME)"
+	DISTRO_STATUS="\e[0;91mend of life\e[0m ($DISTRIBUTION_CODENAME)"
 else
-	DISTRO_STATUS="\e[1;93mrolling\e[0m ($DISTRIBUTION_CODENAME)"
+	DISTRO_STATUS="\e[0;93mrolling\e[0m ($DISTRIBUTION_CODENAME)"
 fi
 
 # read packages update status
 NUM_UPDATES=0
 NUM_UPDATES_ONHOLD=0
 NUM_SECURITY_UPDATES=0
 [[ -f /var/cache/apt/archives/updates.number ]] && . /var/cache/apt/archives/updates.number
-if [[ $NUM_UPDATES -gt 0 ]] && grep -q linux /var/cache/apt/archives/updates.list 2>/dev/null; then
-	if [[ $NUM_UPDATES_ONHOLD -gt 0 ]]; then
-		UPDATE_STATUS="FW upgrade \e[1;91mdisabled\e[0m"
+if [[ $NUM_UPDATES -gt 0 ]]; then
+	if apt-mark showhold | grep -q linux-image 2>/dev/null; then
+		UPDATE_STATUS="Kernel upgrade \e[0;91mdisabled\e[0m"
 		else
-		UPDATE_STATUS="FW upgrade \e[1;92menabled\e[0m"
+		UPDATE_STATUS="Kernel upgrade \e[0;92menabled\e[0m"
 	fi
 	UPDATE_STATUS+=" and \e[1;92m$NUM_UPDATES\e[0m package"
 	# Cosmetic is important
 	[[ $NUM_UPDATES -gt 1 ]] && UPDATE_STATUS+="s"
 	UPDATE_STATUS+=" available for upgrade\e[0m "
 fi
 
-# draw a line to start this section
-#printf "\e[0;90m OS "; printf '%.s─' $(seq 1 76); echo -e " \x1B[0m"
 echo ""
 
 # Display packages status

packages/bsp/common/etc/update-motd.d/30-armbian-sysinfo

@@ -19,7 +19,7 @@ MOTD_DISABLE=""
 PRIMARY_INTERFACE="eth0"
 PRIMARY_DIRECTION="rx"
 STORAGE=/dev/sda1
-HIDE_IP_PATTERN="^dummy0|^lo"
+HIDE_IP_PATTERN="^dummy0|^lo|^docker"
 CPU_TEMP_LIMIT=60
 # Temperature offset in Celcius degrees
 CPU_TEMP_OFFSET=0
@@ -53,6 +53,10 @@ function display() {
 	fi
 } # display
 
+function get_wan_address(){
+curl -s http://whatismyip.akamai.com/
+}
+
 function get_ip_addresses() {
 	local ips=()
 	for f in /sys/class/net/*; do
@@ -91,6 +95,7 @@ function storage_info() {
 # Works only with ambienttemp and batteryinfo since A20 is slow enough :)
 amb_temp=$(ambienttemp &)
 ip_address=$(get_ip_addresses &)
+wan_ip_address=$(get_wan_address &)
 batteryinfo
 storage_info
 getboardtemp
@@ -126,9 +131,15 @@ swap_total=$(awk '{print $(2)}' <<<${swap_info})
 
 # draw a line to start this section
 
-#printf "\e[0;90m Sysinfo "; printf '%.s─' $(seq 1 71); echo -e " \x1B[0m"
+#echo ""
+echo -en " IP addresses: \x1B[93m(LAN)\x1B[0m \x1B[92m$ip_address\x1B[0m "
+if [[ -n $wan_ip_address ]]; then
+echo -e "\x1B[93m(WAN)\x1B[0m $wan_ip_address"
+fi
+echo ""
+printf "\e[0;90m Performance:  \x1B[0m"
+echo "" # fixed newline
 echo ""
-
 display " Load" "${load%% *}" "${critical_load}" "0" "%" ""
 
 printf "Up time:       \x1B[92m%s\x1B[0m\t" "$time"
@@ -148,8 +159,6 @@ fi
 
 display " Memory usage" "$memory_usage" "70" "0" "%" " of ${memory_total}"
 display "Zram usage" "$swap_usage" "75" "0" "%" " of ${swap_total}"
-printf "IP:	       "
-printf "\x1B[92m%s\x1B[0m" "$ip_address"
 echo "" # fixed newline
 display " CPU temp" "$board_temp" $CPU_TEMP_LIMIT "0" "°C" ""
 display "Ambient temp" "$amb_temp" $AMB_TEMP_LIMIT "0" "°C" ""
@@ -164,21 +173,23 @@ display "Battery" "$battery_percent" "20" "1" "%" "$status_battery_text" ; a=$((
 line=0
 if [[ -n "$PRIMARY_INTERFACE" ]] && vnstat -i "$PRIMARY_INTERFACE" &> /dev/null; then
 	traffic=$(vnstat -i $PRIMARY_INTERFACE --oneline | cut -d";" -f4,5)
-	traffic_rx=$(echo $traffic | cut -d";" -f1,1 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
-	traffic_tx=$(echo $traffic | cut -d";" -f2,2 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
+	traffic_rx=$(echo $traffic | cut -d";" -f1,1 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/' | cut -d" " -f1 | cut -d"," -f1)
+	traffic_rx_unit=$(echo $traffic | cut -d";" -f1,1 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/' | cut -d" " -f2)
+	traffic_tx=$(echo $traffic | cut -d";" -f2,2 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/' | cut -d" " -f1 | cut -d"," -f1)
+	traffic_tx_unit=$(echo $traffic | cut -d";" -f2,2 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/' | cut -d" " -f2)
 	[[ "$traffic" == *"Not enough"* ]] && { traffic_tx="n/a	"; traffic_rx="n/a	"; }
 	case $PRIMARY_DIRECTION in
 		tx)
-			printf " TX today:      \x1B[92m%s\x1B[0m  \t"  "$traffic_tx"
+			display " TX today" "$traffic_tx" 500 0 " $traffic_tx_unit" ""
 			line=$((line+1))
 		;;
 		rx)
-			printf " RX today:      \x1B[92m%s\x1B[0m  \t"  "$traffic_rx"
+			display " RX today" "$traffic_rx" 500 0 " $traffic_rx_unit" ""
 			line=$((line+1))
 		;;
 		both)
-			printf " TX today:      \x1B[92m%s\x1B[0m  \t"  "$traffic_tx"
-			printf " RX today:      \x1B[92m%s\x1B[0m  \t"  "$traffic_rx"
+			display " TX today" "$traffic_tx" 500 0 " $traffic_tx_unit" ""
+			display "RX today" "$traffic_rx" 500 0 " $traffic_rx_unit" ""
 			line=$((line+1))
 		;;
 		*) #off or whatever
@@ -191,15 +202,15 @@ if [[ $(command -v zpool) ]]; then
 	if [[ -n $(echo $zpoolstatus | grep 'not loaded') ]]; then
 	:
 	elif [[ -n $(echo $zpoolstatus | grep 'degraded\|OFFLINE') ]]; then
-		printf " ZFS pool:      "
+		printf " ZFS pool:     "
 		echo -ne "\e[0;91mDegraded\x1B[0m"
 		line=$((line+1))
 	elif [[ -n $(echo $zpoolstatus | grep 'no pools available') ]]; then
-		printf " ZFS pool:      "
+		printf " ZFS pool:     "
 		echo -ne "n/a"
 		line=$((line+1))
 	else
-		printf " ZFS pool:      "
+		printf " ZFS pool:     "
 		echo -ne "\e[0;92mOnline\x1B[0m"
 		line=$((line+1))
 	fi

packages/bsp/common/etc/update-motd.d/35-armbian-tips

@@ -25,8 +25,8 @@ if [[ -f $quotes && $(( $RANDOM % 1 )) == 0 ]]; then
 	DUE_DATE=$(echo $quote | cut -d"|" -f1)
 	SELECTED_QUOTE=$(echo $quote | cut -d"|" -f2)
         if [[ -n $SELECTED_QUOTE && $(date +'%Y-%m-%d') < $(date -d $DUE_DATE +"%Y-%m-%d") ]]; then
-		# draw a line to start this section
-		printf "\n\e[0;90m Tips:\x1B[0m\n " #; printf '%.s─' $(seq 1 5); echo -e " \x1B[0m"
+		printf "\e[0;90m Tips:\x1B[0m\n " #; printf '%.s─' $(seq 1 5); echo -e " \x1B[0m"
 		echo -e "\n$SELECTED_QUOTE" | fold -w 79 -s | sed 's/^/ /'
+		echo ""
 	fi
 fi

packages/bsp/common/etc/update-motd.d/41-commands

@@ -18,14 +18,29 @@ for f in $MOTD_DISABLE; do
 	[[ $f == $THIS_SCRIPT ]] && exit 0
 done
 
+printf "\e[0;90m Commands: \x1B[0m\n" #; printf '%.s─' $(seq 1 39); echo -e "\x1B[0m"
 echo ""
-printf "\e[0;90m Commands: \e[0;90m\n" #; printf '%.s─' $(seq 1 39); echo -e "\x1B[0m"
-echo ""
-echo -e " \e[1;93mUpdate\e[1;39m:               sudo apt update ; sudo apt upgrade"
-echo -e " \e[1;93mSystem config\e[1;39m:        sudo armbian-config"
+
+list=(
+    "System config                ","sudo ","armbian-config"
+    "System monitor               ","","htop"
+)
+
+# just for easier coloring
+yellow() { printf '%s' $'\e[1;33m' "$*" $'\e[0m'; }
+
+for l in "${list[@]}"
+do
+	name=$(echo $l | cut -d"," -f1)
+	sudo=$(echo $l | cut -d"," -f2)
+	command=$(echo $l | cut -d"," -f3)
+
+	if command -v $command &> /dev/null
+	then
+		printf "$(yellow " %-26s %-0s"): $sudo$command\n" "$name"
+	fi
+done
+
 echo -e "\033[0m"
-#printf "\e[0;90m www.armbian.com/donate "; printf '%.s─' $(seq 1 21); echo -e "\x1B[0m"
-#echo ""
 
 exit 0
-