remora

Remora is command-line tool and library to manage kubernetes cluster on any cloud and baremetal.

You can see Quick Start Guide which uses Vagrant to install and run Kubernetes cluster.

Prerequisite

You will need following softwares.

• Python 3.5 or later and pip
• kubectl 1.7.x or later

Supported Linux distribution

• Ubuntu 16.04
• CoreOS

Supported Container Runtime

• Docker 1.12

How to install Kubernetes

This document assumes that you have 4 machines on which Docker 1.12 is already installed. And finally you will build a cluster of the following composition.

• VIP(192.168.1.101): VIP for accessing Kubernetes
• Machine01(192.168.1.111): Kubernetes Master
• Machine02(192.168.1.112): Kubernetes Master
• Machine03(192.168.1.121): Kubernetes Worker
• Machine04(192.168.1.122): Kubernetes Worker

You will be working on a local machine that can ssh into each machines.

1. Clone this repository and write config file

Please clone this repository into your local machine.

$ git clone https://github.com/nec-openstack/remora.git
$ cd remora
$ cat <<-EOF > configs/cluster.yaml
---
# Username of target VMs
# If you use Ubuntu, change below line to like `user: ubuntu`.
user: core

local:
  assets_dir: "~/.kube/assets"

masters: &masters
  - 192.168.1.111
  - 192.168.1.112
workers: &workers
  - 192.168.1.121
  - 192.168.1.122

roledefs:
  bootstrap:
  - 192.168.1.111
  etcd: *masters
  master: *masters
  worker: *workers

kubernetes:
  # Public kubernetes service address
  public_service_ip: 192.168.1.101
EOF

This config file specify bootstrap host which boot Kubernetes cluster and Kubernetes master/worker addresses. And you can see some example config files in configs directory. configs/openstack.yaml tells you how to setup single master node cluster on the top of OpenStack.

Notes: Remora uses fabric to setup kubernetes cluster. And these config files are used for specifying target cluster. If you put configs/hoge.yaml file under configs directory, Remora will create hoge sub-task to specify hoge cluster.

2. Install dependencies

Remora requires some dependencies, so it's needed to install.

$ pip install -r requirements.txt

And also Remora will use kubectl command. So please install kubectl.

3. Generate assets

Following command will create the assets which are needed to build Kubernetes cluster such as TLS certs, systemd unit files, Kubernetes manifests and install scripts.

$ fab cluster render

After this procedure, the assets are generated in local.assets directory. You can modify these assets if you want.

4. Install Kubelet

Kubelet manages all components which are installed by remora. So it's needed to install Kubelet first.

$ fab cluster install.kubelet

5. Install Etcd

Etcd is also essential component for Kubernetes, but installing Etcd is out of scope. So this script only install test grade etcd for testing purpose.

$ fab cluster install.etcd

6. Install Bootstrap Kubernetes

Remora will install Kubernetes cluster using Kubernetes itself, in other words, Remora needs Bootstrap Kubernetes cluster before installing. Following command create Bootstrap Kubernetes cluster.

$ fab cluster install.bootstrap

7. Install Kubernetes

It's the time to install Real Kubernetes cluster. Following command build Kubernetes cluster and cleanup Bootstrap Kubernetes cluster.

$ fab cluster install.kubernetes

Check you cluster

You can access Kubernetes cluster easily. Following command will setup you kubeconfig.

$ fab cluster config

Then you can use kubectl command.

$ kubectl version

That's all.