Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

fix(autoware_launch): minor change with tier4_planning_component #185

Conversation

takayuki5168
Copy link
Contributor

@takayuki5168 takayuki5168 commented Jan 25, 2023

Signed-off-by: Takayuki Murooka takayuki5168@gmail.com

Description

clean up autoware.launch.xml regarding tier4_planning_component

Pre-review checklist for the PR author

The PR author must check the checkboxes below when creating the PR.

In-review checklist for the PR reviewers

The PR reviewers must check the checkboxes below before approval.

Post-review checklist for the PR author

The PR author must check the checkboxes below before merging.

  • There are no open discussions or they are tracked via tickets.

After all checkboxes are checked, anyone who has write access can merge the PR.

Signed-off-by: Takayuki Murooka <takayuki5168@gmail.com>
Signed-off-by: Takayuki Murooka <takayuki5168@gmail.com>
@takayuki5168
Copy link
Contributor Author

I confirmed that planning_simualtor worked well with this PR.
We can designate parameters from outside like planning_simulator.launch.xml.

@takayuki5168
Copy link
Contributor Author

@tkimura4 Could you approve if this PR looks good.

takayuki5168 pushed a commit to takayuki5168/autoware_launch.test that referenced this pull request Jan 26, 2023
* chore: sync files

Signed-off-by: GitHub <noreply@github.com>

* Update sync-files.yaml

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>
Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>
soblin pushed a commit to soblin/autoware_launch that referenced this pull request Jan 26, 2023
* update parameter (autowarefoundation#169)

* Port pure pursuit (autowarefoundation#166)

* Fix control.launch.py

* Apply pre-commit

* Fix control.launch.py

* Change debug topic name in rviz setting

* fix typo in localization util.launch.py (autowarefoundation#168)

* Feature/add covarinace param (autowarefoundation#170)

* add covariance param

* add description

* remove unused param (autowarefoundation#172)

* Bump streetsidesoftware/cspell-action from 1.3.4 to v1 (autowarefoundation#174)

* Bump streetsidesoftware/cspell-action from 1.3.4 to 1.5.0

Bumps [streetsidesoftware/cspell-action](https://github.com/streetsidesoftware/cspell-action) from 1.3.4 to 1.5.0.
- [Release notes](https://github.com/streetsidesoftware/cspell-action/releases)
- [Changelog](https://github.com/streetsidesoftware/cspell-action/blob/main/CHANGELOG.md)
- [Commits](streetsidesoftware/cspell-action@v1.3.4...v1.5.0)

---
updated-dependencies:
- dependency-name: streetsidesoftware/cspell-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>

* Update spell_check_pr.yml

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>

* fix: fix hdd_monitor param (autowarefoundation#173)

* add rosbridge launch (autowarefoundation#175)

* add rosbridge launch

* fix TODO document

add link to pull request

Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>

* fix double-byte character

Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>

* chore: sync files (autowarefoundation#177)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* ci: update CI settings (autowarefoundation#176)

* ci(pre-commit): update .pre-commit-config.yaml

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* ci: add sync-files.yaml

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* chore: remove old workflows

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* ci(sync-upstream): update sync-upstream.yaml

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* ci(pre-commit): autofix

* style: fix for yamllint

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>

* chore: minor update CI settings (autowarefoundation#179)

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* [pre-commit.ci] pre-commit autoupdate (autowarefoundation#178)

updates:
- [github.com/pre-commit/pre-commit-hooks: v4.0.1 → v4.1.0](pre-commit/pre-commit-hooks@v4.0.1...v4.1.0)
- [github.com/igorshubovych/markdownlint-cli: v0.29.0 → v0.30.0](igorshubovych/markdownlint-cli@v0.29.0...v0.30.0)
- [github.com/pre-commit/mirrors-prettier: v2.4.1 → v2.5.1](pre-commit/mirrors-prettier@v2.4.1...v2.5.1)
- [github.com/pycqa/isort: 5.9.3 → 5.10.1](PyCQA/isort@5.9.3...5.10.1)
- [github.com/psf/black: 21.9b0 → 22.1.0](psf/black@21.9b0...22.1.0)

Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>

* chore: fix CI settings (autowarefoundation#182)

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* chore: sync files (autowarefoundation#180)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* chore: sync files (autowarefoundation#184)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* feat: add paricle param (autowarefoundation#181)

Signed-off-by: YamatoAndo <yamato.ando@gmail.com>

* chore: sync files (autowarefoundation#185)

* chore: sync files

Signed-off-by: GitHub <noreply@github.com>

* Update sync-files.yaml

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>
Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>

* chore: sync files (autowarefoundation#186)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* chore: sync system config (autowarefoundation#187)

Signed-off-by: wep21 <border_goldenmarket@yahoo.co.jp>

* chore: sync files (autowarefoundation#189)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: wep21 <wep21@users.noreply.github.com>

* chore: replace system config in system launch (autowarefoundation#188)

Signed-off-by: wep21 <border_goldenmarket@yahoo.co.jp>

* feat: adds additional configuration flags for behavior_path_planner (autowarefoundation#171)

* feat: adds additional configuration flags for behavior_path_planner

The additional configuration is used to allows avoidance over lane with same and
different direction, as well as allows safety margin between linestring and ego.

This is a `.iv` launcher https://github.com/tier4/autoware_launcher/pull/496
port.

Related PR:
autowarefoundation/autoware.universe#285
autowarefoundation/autoware.universe#287

Signed-off-by: Muhammad Zulfaqar Azmi <zulfaqar.azmi@tier4.jp>

* Change lateral_collision_margion to 1.0 to reflect changes.

The decision to change the parameter value to 1.0 is made after performing
drivable area experiment at Odaiba areas on 2nd of February 2022 and meeting
between planning control team on 3rd of February 2022.

Signed-off-by: Muhammad Zulfaqar Azmi <zulfaqar.azmi@tier4.jp>

* fix: slightly increase the safety buffer.

This increases the shift length to 1.7 + 0.5 * vehicle width.

The decision to increase is based on the discussion between planning team and
also the advice from the FI team.

Signed-off-by: Muhammad Zulfaqar Azmi <zulfaqar.azmi@tier4.jp>

* feat(behavior_velocity): add path marker visualization (autowarefoundation#190)

Signed-off-by: tanaka3 <ttatcoder@outlook.jp>

* chore: sync files (autowarefoundation#193)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* chore: sync files (autowarefoundation#194)

* chore: sync files

Signed-off-by: GitHub <noreply@github.com>

* chore: update workflow files name

Signed-off-by: h-ohta <hiroki.ota@tier4.jp>

Co-authored-by: h-ohta <h-ohta@users.noreply.github.com>
Co-authored-by: h-ohta <hiroki.ota@tier4.jp>

* chore: sync files (autowarefoundation#195)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: h-ohta <h-ohta@users.noreply.github.com>

* feat: lateral controller param (autowarefoundation#191)

* feat: define lat_controller_param_path

* feat: change for trajectory_follower params

* add args for lat_controller_param_path

* chore: fix wrong essential param to optional (autowarefoundation#197)

* fix wrong param line

* move pointcloud_container_name param to optional

* fix: typo extra `>` (autowarefoundation#199)

* Chore arrange perception rviz topics (autowarefoundation#196)

* feat(autoware_launch): add occupancy grid vizualization

Signed-off-by: tanaka3 <ttatcoder@outlook.jp>

* feat(autoware_launch): add object recognition namespace to rviz

Signed-off-by: tanaka3 <ttatcoder@outlook.jp>

* fix: delete unused in control_launch (autowarefoundation#200)

* fix: delete unused in control.launch.py

* fix: delete velocity_controller.param.yaml

* feat: add system_monitor parameters in sync-files (autowarefoundation#201)

* chore: sync files (autowarefoundation#202)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: h-ohta <h-ohta@users.noreply.github.com>

* chore: sync files (autowarefoundation#203)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* chore: update settings of sync-files (autowarefoundation#204)

Signed-off-by: Kenji Miyake <kenji.miyake@tier4.jp>

* feat(control_launch): remove unnecessary params (autowarefoundation#206)

Signed-off-by: Takayuki Murooka <takayuki5168@gmail.com>

* chore: sync files (autowarefoundation#208)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* feat(atutoware.rviz): disable selectable for pointcloud visualization (autowarefoundation#207)

Signed-off-by: YamatoAndo <yamato.ando@gmail.com>

* chore: sync files (autowarefoundation#212)

Signed-off-by: GitHub <noreply@github.com>

Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>

* delete vehicle parameters in longitudinal_controller.param.yaml

* apply pre-commit

* remove unused file

* update sync-param-files.yaml

* disable local_external_control in system_error_montitor_psim

Co-authored-by: Tomoya Kimura <tomoya.kimura@tier4.jp>
Co-authored-by: Fumiya Watanabe <rej55.g@gmail.com>
Co-authored-by: YamatoAndo <yamato.ando@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Kenji Miyake <31987104+kenji-miyake@users.noreply.github.com>
Co-authored-by: yabuta <makoto.yabuta@tier4.jp>
Co-authored-by: tier4-autoware-bot[bot] <98652886+tier4-autoware-bot[bot]@users.noreply.github.com>
Co-authored-by: kenji-miyake <kenji-miyake@users.noreply.github.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daisuke Nishimatsu <42202095+wep21@users.noreply.github.com>
Co-authored-by: wep21 <wep21@users.noreply.github.com>
Co-authored-by: Zulfaqar Azmi <93502286+zulfaqar-azmi-t4@users.noreply.github.com>
Co-authored-by: taikitanaka3 <65527974+taikitanaka3@users.noreply.github.com>
Co-authored-by: tier4-autoware-public-bot[bot] <98652886+tier4-autoware-public-bot[bot]@users.noreply.github.com>
Co-authored-by: h-ohta <h-ohta@users.noreply.github.com>
Co-authored-by: h-ohta <hiroki.ota@tier4.jp>
Co-authored-by: Yukihiro Saito <yukky.saito@gmail.com>
Co-authored-by: Takayuki Murooka <takayuki5168@gmail.com>
Copy link
Contributor

@kminoda kminoda left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

LGTM

@takayuki5168 takayuki5168 merged commit c721d59 into autowarefoundation:main Feb 3, 2023
maxime-clem pushed a commit to maxime-clem/autoware_launch that referenced this pull request Jun 26, 2023
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants