pydoor

Automated door lock system based on Raspberry Pi

Requirements

Hardware

• Raspberry Pi (tested on Raspberry Pi 3)

Operating System

• Raspberry Pi OS (formerly knows as Raspbian)

Software

• Python 3 (uses system's Python 3 distribution)
• python3-venv
• python3-rpi.gpio (Note: also required outside of venv?)
• nginx

For specific Python dependencies see requirements.txt.

Installation

1. Clone this repository: git clone https://github.com/b4ckspace/pydoor.git
2. Create Python virtual environment, e.g.: python3 -m venv venv
3. Activate venv: . venv/bin/activate
4. In venv install dependencies: pip install -r requirements.txt
5. Copy systemd service file: cp extras/systemd/pydoor.service /etc/systemd/system/
6. Copy systemd service environment file: cp extras/systemd/pydoor.env /etc/default/
7. Adjust systemd serice enviroment file /etc/default/pydoor.env
8. Enable systemd service: systemd enable pydoor.service
9. Install and adjust nginx configuration: cp extras/nginx/default /etc/nginx/conf.d/default
10. Reload nginx: systemd reload nginx.service

Important: Make sure that the logging output of the service (sudo journalctl -u pydoor.service -f) does not contain warnings like "PinFactoryFallback: Falling back from rpigpio: No module named 'RPi'" or "NativePinFactoryFallback: Falling back to the experimental pin factory NativeFactory because no other pin factory could be loaded. For best results, install RPi.GPIO or pigpio. See https://gpiozero.readthedocs.io/en/stable/api_pins.html for more information." – this means a pin driver library like RPi.GPIO is missing (see gpiozero FAQ).