B78XH (B787-10 Heavy)

About

B78XH is an open source and free modification of default Boeing 787-10 in Microsoft Flight Simulator.

Normal vs WO release

WO release is same as normal release but the release does not contain managers. (Payload and SimRate manager)

Features Overview

• FMC

  • VNAV

    • CLB Speed restriction
    • CLB Selected speed
    • CLB Selected speed can be deleted by ECON prompt
    • CLB settable transition altitude
    • CLB FMC commanded speed is highlighted by magenta
    • CLB page title depends on commanded speed (ACT/MOD ECON CLB, ACT/MOD xxxKT CLB, ...)
    • CRZ settable selected speed
    • CRZ FMC commanded speed is highlighted by magenta
    • CRZ Selected speed can be deleted by ECON prompt
    • CRZ page title depends on commanded speed (ACT/MOD ECON CRZ, ACT/MOD xxxKT CRZ, ...)
    • Cruise Climb
    • Cruise Descent
    • Early descent (descent path calculation not supported now)
    • DES NOW (descent path calculation not supported now)
    • Climb leveling off

  • LEGS

    • Cruise speed fixed
    • DIRECT TO (basic)

  • ROUTE

    • Airways support
    • All waypoints between first and last added waypoint are inserted to Legs page

  • MISC

    • "HEAVY" button added (misc & configuration of mod)

• ND/MFD

  • MFD is touchable on both sides
  • ND symbols changed to default Boeing symbols
  • Altitude Range Arc (ARA) [Green banana]
  • TOD
  • TOC

• EICAS / SYS

  • Gears synoptic page
  • Hydraulics synoptic page
  • Stat page
  • FCTL synoptic page
  • AIR synoptic page (static)

• MISC

  • Added HEAVY configuration page
  • Payload Manager added to HEAVY configuration page
  • SimRate Manager added to HEAVY configuration page

• Payload manager

  • CG range 0 - 100%
  • FOB range 0 - 33384 Gallons
  • Payload range 0 - 560000 Pounds
  • FOB can be set only in Gallons
  • Payload can be set only in Pounds
  • Fuel tanks priority groups:
    • LEFT MAIN, RIGHT MAIN
    • CENTER
  • "new" ZFW is set automatically by payload manager
  • manager do not check "GrossWeight" > "Max takeoff weight" (you can overload an aircraft)

• SimRate manager

  • Modes:
    • slow down - change sim rate to 1x few miles before TOD or DECEL waypoint
    • pause - pause game few miles before TOD or DECEL waypoint
  • Rate Modes:
    • Off - do nothing (do not change sim rate)
    • Linear - Change sim rate to 4x and hold.
    • Normal - Change sim rate to 4x and hold. 5nm before waypoint change sim rate to 2x and hold. 3nm after waypoint change sim rate to 4x and hold.
    • Aggressive - change sim rate to 8x and hold (!!!Do not use this mode now!!!)
  • Unpause button - unpause game when the game is paused by sim rate manager (this is the only way how to unpause game)
  • Emergency shutdown - Terminates all sim rate manager interventions immediately. During an emergency shutdown is not possible to use FMC for 6 seconds. You will be able to deactivate an emergency shutdown or leave the page without deactivation after 6 seconds.

ND

Default MSFS 787 ND	B787-10 Heavy ND

Symbol (default)	Symbol (Heavy)	Name	ND Mode	Remarks
		Off route waypoint
		Waypoint inactive
		Waypoint active
		Airport
		VOR
		VOR/DME
		TACAN
		VORTAC

ND - Altitude prediction (BANANA)

SimRate Manager