node-red-contrib-onvif-nodes

Node Red nodes for communicating with OnVif compliant IP devices

THIS IS AN EXPERIMENTAL NODE-RED CONTRIBUTION !!!

Update 28-11-2020: I get frequently the question why I haven't published these nodes on NPM yet.

Well the answer is very simple: a lack of free time...

Our friend @SuperNinja73 has been so kind to perform a large series of tests (see test results).

Based on these test result, I concluded that the comera profile configuration via these nodes is not user friendly.

But I don't have the time to develop and maintain an entire Onvif device manager inside Node-RED.

To solve this I would like to generate automatically a user interface based on the onvif.xsd file.

I have compared some libraries, but at the end I agreed with Nick to implement this functionality in the Node-RED JSON editor.

Because then it can be reused by other node developers.

However it seems the JSON schema specification is rather large, so it is a hell of a job to implement this in my very limited time.

That is why it is all taking so long ...

Install

Run the following npm command in your Node-RED user directory (typically ~/.node-red), to install the latest beta version of this node from this Github repo:

npm install bartbutenaers/node-red-contrib-onvif-nodes

See the releases page for an overview of what has changed per release.

Support my Node-RED developments

Please buy my wife a coffee to keep her happy, while I am busy developing Node-RED stuff for you ...

Onvif basics

The Open Network Video Interface Forum is an open standard interface to communicate with IP devices on a network. This standard has become very popular, and therefore lots of manufacturers offer Onvif-compliant IP devices.

All IP devices have their own API, which consists out of a large set of URL's to control the device (to get a snapshot image, to turn the camera left ...). The disadvantage is that you have to learn all the API's of each camera that you buy, which means that it is not easy to replace a camera by another type (since you always will have to update your Node-Red flow).

The Onvif standard has been created to solve this issue. Each Onvif compliant device offers the same API to control the device, which means that device type X can easily be replaced by device type Y.

Onvif devices can offer multiple (web) services, for all kind of functionalities:

• Device discovery
• Device management
• Media configuration
• Real time viewing
• Event handling
• PTZ camera control
• ...

Not all Onvif devices offer all those services, since this the device's Onvif version determines which services are available. However the Onvif version number is not as important as the Onvif profile. A number of Onvif profiles are available, which determine which functionality each service offers:

• Profile S: functionalities of IP video systems, such as video and audio streaming, PTZ controls, ...
• Profile C: functionalities of IP access control systems, such as door control, event handling, ...
• Profile G: functionalities of video storage, recording, ...
• Profile Q: functionalities of device discovery, ...
• ...

You can find here which profile is required to fit your needs. Conclusion is that not all Onvif devices will offer the functionality that you might need!

Missing functionality and problems

This Node-Red node is build on top of the onvif library, which is a profile S and Profile G implementation. So this Node-Red node is absolutely no full implementation of the entire Onvif standard!

Moreover not all device manufacturers implement the Onvif standard correctly. In that case you might not be able to fully control your devices using these nodes.

Most of the Onvif logic is developed in the library I use underneath. So to get new functionality or to get a problem fixed, the fastest way to get it done is following these steps:

1. Create a new issue here to ask your Onvif related question in the onvif library. This step is not required when you have a Node-RED specific question!
2. As soon as step 1 is implemented, create a new issue here and then I can finish your change in this Node-Red node.

Or if you have programming skills, you might create two pull requests instead.

Discovery node

To search the network for Onvif-compliant devices, the Discovery node can be used. When this node is triggered (by means of an input message), it will send an OnVif broadcast to all the devices on the network. All OnVif compliant devices will respond to this, and they will be listed in the output message msg.payload:

[{"id":"a19788d1.afaf98","type":"onvif-discovery","z":"50df184.124f2e8","name":"","timeout":5,"separate":true,"x":500,"y":480,"wires":[["ed0cc23.44c014"]]},{"id":"be6e8353.f7716","type":"inject","z":"50df184.124f2e8","name":"Start searching","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":280,"y":480,"wires":[["a19788d1.afaf98"]]},{"id":"ed0cc23.44c014","type":"debug","z":"50df184.124f2e8","name":"Onvif devices","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":700,"y":480,"wires":[]}]

The Discovery node has following settings:

• The timeout time is by default 5 seconds, which means that the node will wait 5 seconds for all devices to respond. In normal circumstances all responses will arrive within 3 seconds. However when some devices are not detected, it might be useful to increase the timeout time. That way slower devices will have more time to respond to the broadcast signal.

• The checkbox 'Separate output message for each device' allow to control the output messages:

  • When enabled, a separate output message will be generated for each OnVif compliant device. As soon as an Onvif device has responded, an output message will be generated immediately. However the node will continue waiting for other Onvif devices to respond, until the timeout time has been reached.
  • When disabled, a single output message will be generated (containing an array of all available OnVif devices). This message will only appear after the timeout time, to allow all Onvif devices to respond.

For every discovered OnVif compliant device, following data will be generated in the output message:

The 'XAddrs' field contains the IP address (and the port number), which will be used to configure the Onvif device in Node-Red! Indeed you will have to create an Onvif device config node for every Onvif device that you have discovered.

During discovery the node status will be 'discovering'. But once the timeout has passed, the discovery process is 'completed' and the number of discovered devices will be displayed:

As long as the discovery process is active, no second discovery process can be started (via the same Discovery node).

Config node

The config node contains all information required to connect to an Onvif device:

• IP address (or hostname): Specify either the IP address or the host (domain) name of the Onvif device. When you don't know the IP address of your Onvif nodes, please see the Discovery node above.
• Port: When you don't know the IP address of your Onvif nodes, please see the Discovery node above. If no port number visible, use port 80 by default.
• Username: Optional but highly advised to secure your camera by username/password credentials.
• Password: Optional but highly advised to secure your camera by username/password credentials.

TODO: Add a search box that starts a discovery, and from which users can select an IP address of an Onvif device.

In all other Onvif nodes (Media, PTZ ...), these device config nodes can be selected (in the dropdown) to send Onvif commands to the device:

The config node will handle all communication with the Onvif device:

Since all Onvif nodes (of the same Onvif device) share the same config node, that config node will load the required data only once from the Onvif device. This caching mechanism reduces the communication between Node-RED and the Onvif device.

CAUTION: the IP addres of the Onvif device should not be changed by your DHCP server (e.g. inside your router), otherwise the Onvif device won't be accessible anymore afterwards.

Imaging node

This node offers functionality to configure imaging specific properties.

The following example flow shows how to read and set those properties:

[{"id":"7af75a72.95fca4","type":"onvif-imaging","z":"b3db206e.b7139","name":"","deviceConfig":"c6b46a46.8067f8","profile":"","action":"","x":760,"y":1600,"wires":[["57608e7d.d0012"]]},{"id":"3f04f383.92106c","type":"inject","z":"b3db206e.b7139","name":"Get imaging settings","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":310,"y":1600,"wires":[["58099d05.b3bd54"]]},{"id":"57608e7d.d0012","type":"debug","z":"b3db206e.b7139","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","x":950,"y":1600,"wires":[]},{"id":"58099d05.b3bd54","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getImagingSettings","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":540,"y":1600,"wires":[["7af75a72.95fca4"]]},{"id":"802207fe.5bec58","type":"inject","z":"b3db206e.b7139","name":"Set imaging settings","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":310,"y":1660,"wires":[["7692be04.f17cc"]]},{"id":"7692be04.f17cc","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setImagingSettings","tot":"str"},{"t":"set","p":"payload","pt":"msg","to":"{}","tot":"json"},{"t":"set","p":"payload.brightness","pt":"msg","to":"60","tot":"num"},{"t":"set","p":"payload.colorSaturation","pt":"msg","to":"60","tot":"num"},{"t":"set","p":"payload.contrast","pt":"msg","to":"60","tot":"num"},{"t":"set","p":"payload.sharpness","pt":"msg","to":"60","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":540,"y":1660,"wires":[["7af75a72.95fca4"]]},{"id":"c6b46a46.8067f8","type":"onvif-config","z":"","xaddress":"192.168.1.174","port":"80","name":"Hikvision"}]

• The action getImagingSettings gets the current imaging setting values:

  

• The action getImagingSettings allows to set (one or more) new imaging setting values, via

  • msg.payload.backlightCompensation
  • msg.payload.brightness
  • msg.payload.colorSaturation
  • msg.payload.contrast
  • msg.payload.exposure
  • msg.payload.focus
  • msg.payload.irCutFilter
  • msg.payload.sharpness
  • msg.payload.wideDynamicRange
  • msg.payload.whiteBalance
  • msg.payload.focus
  • msg.payload.extension

Yet another flow to demonstrate how to update those values via user gestures (e.g. inject buttons in the flow editor):

[{"id":"1517f507.2f887b","type":"inject","z":"b3db206e.b7139","name":"Brightness up","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":290,"y":1760,"wires":[["d3662621.dc4228"]]},{"id":"66f4ba6d.1e5d64","type":"inject","z":"b3db206e.b7139","name":"Brightness down","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":300,"y":1800,"wires":[["23a1fdf0.ed8632"]]},{"id":"d3662621.dc4228","type":"function","z":"b3db206e.b7139","name":"Brightness + 5","func":"// Start default on a brightness value of 50\nvar brightness = flow.get(\"brightness\") || 50;\n\nbrightness += 5;\n\nflow.set(\"brightness\", brightness);\n\nmsg.action     = \"setImagingSettings\";\nmsg.payload = {\n    brightness: brightness\n}\n\nreturn msg;","outputs":1,"noerr":0,"x":540,"y":1760,"wires":[["20bd08d5.3e1068"]]},{"id":"23a1fdf0.ed8632","type":"function","z":"b3db206e.b7139","name":"Brightness - 5","func":"// Start default on a brightness value of 50\nvar brightness = flow.get(\"brightness\") || 50;\n\nbrightness -= 5;\n\nflow.set(\"brightness\", brightness);\n\nmsg.action = \"setImagingSettings\";\nmsg.payload = {\n    brightness: brightness\n};\n\nreturn msg;","outputs":1,"noerr":0,"x":540,"y":1800,"wires":[["20bd08d5.3e1068"]]},{"id":"2792ce4a.dc8d92","type":"inject","z":"b3db206e.b7139","name":"Brightness minimum","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":310,"y":1840,"wires":[["c31d8781.1c3c38"]]},{"id":"fa76b70c.16ff68","type":"inject","z":"b3db206e.b7139","name":"Brightness maximum","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":320,"y":1880,"wires":[["2e3afa6a.088556"]]},{"id":"c31d8781.1c3c38","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setImagingSettings","tot":"str"},{"t":"set","p":"payload","pt":"msg","to":"{}","tot":"json"},{"t":"set","p":"payload.brightness","pt":"msg","to":"1","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":540,"y":1840,"wires":[["20bd08d5.3e1068"]]},{"id":"2e3afa6a.088556","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setImagingSettings","tot":"str"},{"t":"set","p":"payload","pt":"msg","to":"{}","tot":"json"},{"t":"set","p":"payload.brightness","pt":"msg","to":"100","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":540,"y":1880,"wires":[["20bd08d5.3e1068"]]},{"id":"20bd08d5.3e1068","type":"onvif-imaging","z":"b3db206e.b7139","name":"","deviceConfig":"c6b46a46.8067f8","profile":"","action":"","x":760,"y":1760,"wires":[["417ef964.918e88"]]},{"id":"417ef964.918e88","type":"debug","z":"b3db206e.b7139","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","x":950,"y":1760,"wires":[]},{"id":"c6b46a46.8067f8","type":"onvif-config","z":"","xaddress":"192.168.1.174","port":"80","name":"Hikvision"}]

When setting new values, only the updated values should be specified (according to the Onvif standard). However some brands of camera's seem to require that all values are specified. In that case it might be useful to get the current values first, and then replace some of the values:

[{"id":"42d10b09.364e44","type":"onvif-imaging","z":"b3db206e.b7139","name":"","deviceConfig":"c6b46a46.8067f8","profile":"","action":"getImagingSettings","x":580,"y":2580,"wires":[["24dd1d48.864802"]]},{"id":"c07c06d7.31a128","type":"inject","z":"b3db206e.b7139","name":"Set imaging settings","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":350,"y":2580,"wires":[["42d10b09.364e44"]]},{"id":"24dd1d48.864802","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setImagingSettings","tot":"str"},{"t":"set","p":"payload","pt":"msg","to":"{}","tot":"json"},{"t":"set","p":"payload.brightness","pt":"msg","to":"50","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":780,"y":2580,"wires":[["8a81824a.7443e"]]},{"id":"8a81824a.7443e","type":"onvif-imaging","z":"b3db206e.b7139","name":"","deviceConfig":"c6b46a46.8067f8","profile":"","action":"","x":980,"y":2580,"wires":[[]]},{"id":"c66da2da.59a64","type":"comment","z":"b3db206e.b7139","name":"Get the original settings","info":"","x":580,"y":2540,"wires":[]},{"id":"2a0a537c.1457bc","type":"comment","z":"b3db206e.b7139","name":"Replace one or more settings","info":"","x":900,"y":2540,"wires":[]},{"id":"c6b46a46.8067f8","type":"onvif-config","z":"","xaddress":"192.168.1.174","port":"80","name":"Hikvision"}]

P.S. The latter flow might be optimized e.g. by caching the current values in flow memory...

Media node

This node offers functionality about all kind of media, like audio/video/images.

TODO: action 'reconnect' results in TypeError: Cannot read property 'call' of undefined.

TODO: action 'get OSDs' results in Method not found exception.

Audio media

[{"id":"9e153ee9.48599","type":"inject","z":"26dbe156.c7049e","name":"Get audio outputs","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":290,"y":2580,"wires":[["28bffb9c.327f64"]]},{"id":"28bffb9c.327f64","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getAudioOutputs","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2580,"wires":[["2e3b7d54.e13c82"]]},{"id":"ed3a82b7.32feb","type":"inject","z":"26dbe156.c7049e","name":"Get audio sources","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":290,"y":2462,"wires":[["2778fdc6.d45322"]]},{"id":"2778fdc6.d45322","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getAudioSources","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2462,"wires":[["2e3b7d54.e13c82"]]},{"id":"3fda29eb.f08d36","type":"inject","z":"26dbe156.c7049e","name":"Get audio source configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2502,"wires":[["64a7d4f8.a5713c"]]},{"id":"64a7d4f8.a5713c","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getAudioSourceConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2502,"wires":[["2e3b7d54.e13c82"]]},{"id":"4d4b782d.2005b8","type":"inject","z":"26dbe156.c7049e","name":"Get audio encoder configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2542,"wires":[["96c9bf7e.b344d"]]},{"id":"96c9bf7e.b344d","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getAudioEncoderConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2542,"wires":[["2e3b7d54.e13c82"]]},{"id":"3f98ea7e.33d2a6","type":"inject","z":"26dbe156.c7049e","name":"Get audio output configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2620,"wires":[["3a66ad61.76ac62"]]},{"id":"3a66ad61.76ac62","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getAudioOutputConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2620,"wires":[["2e3b7d54.e13c82"]]},{"id":"dff49691.20aad8","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":1070,"y":2460,"wires":[]},{"id":"2e3b7d54.e13c82","type":"onvif-media","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profileToken":"","profileName":"","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"","protocol":"HTTP","stream":"RTP-Unicast","x":871,"y":2460,"wires":[["dff49691.20aad8"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

Video media

[{"id":"b8b92f3c.51354","type":"inject","z":"26dbe156.c7049e","name":"Get video encoder configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2140,"wires":[["5a666ad3.2952e4"]]},{"id":"5a666ad3.2952e4","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getVideoEncoderConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2140,"wires":[["63aa701b.8c9d9"]]},{"id":"2fce045f.1f784c","type":"inject","z":"26dbe156.c7049e","name":"Get video sources","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":290,"y":2300,"wires":[["dd47df99.1a3fe"]]},{"id":"dd47df99.1a3fe","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getVideoSources","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2300,"wires":[["63aa701b.8c9d9"]]},{"id":"916154c8.408b88","type":"inject","z":"26dbe156.c7049e","name":"Get video source configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2340,"wires":[["7b07286e.c802d8"]]},{"id":"7b07286e.c802d8","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getVideoSourceConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2340,"wires":[["63aa701b.8c9d9"]]},{"id":"5739570a.eb8348","type":"inject","z":"26dbe156.c7049e","name":"Get video encoder configuration","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":330,"y":2180,"wires":[["cb58f5b1.958fc8"]]},{"id":"cb58f5b1.958fc8","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getVideoEncoderConfiguration","tot":"str"},{"t":"set","p":"videoEncoderConfigToken","pt":"msg","to":"1_user_conf3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2180,"wires":[["63aa701b.8c9d9"]]},{"id":"a27a367c.953b48","type":"inject","z":"26dbe156.c7049e","name":"Get video encoder configuration options","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":350,"y":2220,"wires":[["b5a68b86.701138"]]},{"id":"b5a68b86.701138","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getVideoEncoderConfigurationOptions","tot":"str"},{"t":"set","p":"videoEncoderConfigToken","pt":"msg","to":"1_user_conf3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2220,"wires":[["63aa701b.8c9d9"]]},{"id":"73c056c.612d7a8","type":"inject","z":"26dbe156.c7049e","name":"Set video encoder configuration options","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":350,"y":2262,"wires":[["57ccd383.b4791c"]]},{"id":"57ccd383.b4791c","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setVideoEncoderConfigurationOptions","tot":"str"},{"t":"set","p":"videoEncoderConfigToken","pt":"msg","to":"1_user_conf3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":620,"y":2262,"wires":[["63aa701b.8c9d9"]]},{"id":"1bc43860.0842c8","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":1030,"y":2140,"wires":[]},{"id":"63aa701b.8c9d9","type":"onvif-media","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profileToken":"","profileName":"","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"","protocol":"HTTP","stream":"RTP-Unicast","x":831,"y":2140,"wires":[["1bc43860.0842c8"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

Stream URLs

[{"id":"25868d80.b669b2","type":"inject","z":"26dbe156.c7049e","name":"Get UDP stream URL","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":300,"y":1980,"wires":[["519a78b1.ab8f98"]]},{"id":"34d26bbc.6f7464","type":"inject","z":"26dbe156.c7049e","name":"Get HTTP stream URL","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":300,"y":2020,"wires":[["5b572094.ac46c"]]},{"id":"5b572094.ac46c","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getStreamUri","tot":"str"},{"t":"set","p":"protocol","pt":"msg","to":"HTTP","tot":"str"},{"t":"set","p":"profileToken","pt":"msg","to":"1_def_profile3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":629,"y":2020,"wires":[["d02bb043.673cf"]]},{"id":"ad234b85.9f4ba8","type":"inject","z":"26dbe156.c7049e","name":"Get RTSP stream URL","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":300,"y":2060,"wires":[["8b9e80fc.49837"]]},{"id":"8b9e80fc.49837","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getStreamUri","tot":"str"},{"t":"set","p":"protocol","pt":"msg","to":"RTSP","tot":"str"},{"t":"set","p":"profileToken","pt":"msg","to":"1_def_profile3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":629,"y":2060,"wires":[["d02bb043.673cf"]]},{"id":"44d1df3f.62193","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":1049,"y":1980,"wires":[]},{"id":"519a78b1.ab8f98","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getStreamUri","tot":"str"},{"t":"set","p":"protocol","pt":"msg","to":"UDP","tot":"str"},{"t":"set","p":"profileToken","pt":"msg","to":"1_def_profile3","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":629,"y":1980,"wires":[["d02bb043.673cf"]]},{"id":"d02bb043.673cf","type":"onvif-media","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profileToken":"","profileName":"","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"","protocol":"","stream":"","x":850,"y":1980,"wires":[["44d1df3f.62193"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

The RTSP url can be used to setup a real-time-streaming-protocol with the camera. In this Node-RED discussion, you can find my flow to decode an RTSP stream in Node-RED to a continious stream of images (after you have installed FFmpeg).

Media profiles

Every Onvif device will contain a series of default media profiles. Every profile contains following data:

• A unique name.
• A unique token which will only be used internally by these Onvif nodes (based on the name, the nodes will lookup the token automatically).
• The configuration for all available media services (audio, video, ptz ...).

For example the 'getProfiles' action (in the example flow below) will return all available media profiles in my Onvif device:

When having a look e.g. at the details of the video encoding configuration, you will see a JPEG of resultion 320x240:

Such a profile names need to be specified for most media actions. So instead of having to repeat the information over and over again, the Onvif device will use the information from the specified profile. For example when a snapshot as JPEG with resolution 320x240 is needed, you only need to specify the profile name 'JPEG_320x240' ...

Following example flow shows how to view and manipulate profiles:

[{"id":"3e1bb7ba.4aea98","type":"inject","z":"26dbe156.c7049e","name":"Get profiles","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":270,"y":2900,"wires":[["3ef210b5.e10dc"]]},{"id":"3ef210b5.e10dc","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getProfiles","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":520,"y":2900,"wires":[["c0548e0f.c2176"]]},{"id":"78adef9.6574c1","type":"inject","z":"26dbe156.c7049e","name":"Create profile","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":270,"y":2940,"wires":[["51f16c10.71d124"]]},{"id":"51f16c10.71d124","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"createProfile","tot":"str"},{"t":"set","p":"profileToken","pt":"msg","to":"testToken","tot":"str"},{"t":"set","p":"profileName","pt":"msg","to":"myProfile","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":520,"y":2940,"wires":[["c0548e0f.c2176"]]},{"id":"f41a1d44.ceef1","type":"inject","z":"26dbe156.c7049e","name":"Delete profile","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":270,"y":2980,"wires":[["2888251b.9d850a"]]},{"id":"2888251b.9d850a","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"deleteProfile","tot":"str"},{"t":"set","p":"profileName","pt":"msg","to":"myProfile","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":520,"y":2980,"wires":[["c0548e0f.c2176"]]},{"id":"6782c13e.298af","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":970,"y":2900,"wires":[]},{"id":"c0548e0f.c2176","type":"onvif-media","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profileToken":"","profileName":"","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"","protocol":"HTTP","stream":"RTP-Unicast","x":771,"y":2900,"wires":[["6782c13e.298af"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

TODO: Not possible yet to create an entire new profile, incl. configurations.

Snapshot images

Remark: to be able to run the example flow, some manual interventions are required:

• The node-red-contrib-image-output should be installed, to show the snapshot image in the flow editor.
• Select an available profile from your Onvif device via the 'search' icon! Indeed the resolution of the snapshot image depends on the profile specified in the node's config screen, e.g. there might be a profile that offers JPEGs with resolution 640x480.
• In the first flow the username and password (of the Onvif config node) should be repeated in the httprequest node.

The action getSnapshotUri returns the URL that can be used for retrieving a snapshot image from the camera. That URL could be passed to a HttpRequest node to fetch the snapshot image:

[{"id":"ed82ed59.593e6","type":"http request","z":"bb2edfc9.1718a","name":"","method":"GET","ret":"bin","url":"","tls":"","x":1170,"y":2820,"wires":[["50246c7e.8dabd4"]]},{"id":"50246c7e.8dabd4","type":"image","z":"bb2edfc9.1718a","name":"","width":200,"x":1350,"y":2820,"wires":[]},{"id":"f8779ce3.3f67","type":"onvifmedia","z":"bb2edfc9.1718a","name":"","deviceConfig":"","profileToken":"","profileName":"","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"getSnapshotUri","protocol":"","stream":"","x":810,"y":2820,"wires":[["a734ba31.f75d78"]]},{"id":"6ac5b6bb.1d3bd8","type":"inject","z":"bb2edfc9.1718a","name":"Get snapshot","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":630,"y":2820,"wires":[["f8779ce3.3f67"]]},{"id":"a734ba31.f75d78","type":"change","z":"bb2edfc9.1718a","name":"","rules":[{"t":"set","p":"url","pt":"msg","to":"payload.uri","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":990,"y":2820,"wires":[["ed82ed59.593e6"]]}]

However the flow will become complex and the device's credentials (username/password) should be repeated in the httprequest node. Therefore action getSnapshot has been added to execute all these steps in a single operation:

[{"id":"907621a9.98d79","type":"inject","z":"26dbe156.c7049e","name":"Get snapshot image","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1430,"y":100,"wires":[["ddb99a63.98e938"]]},{"id":"7074982e.851308","type":"image","z":"26dbe156.c7049e","name":"","width":200,"x":1820,"y":100,"wires":[]},{"id":"ddb99a63.98e938","type":"onvif-media","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profileToken":"","profileName":"JPEG_320x240","videoEncoderConfigToken":"","videoEncoderConfigName":"","videoEncoderConfigEncoding":"","action":"getSnapshot","protocol":"HTTP","stream":"RTP-Unicast","x":1630,"y":100,"wires":[["7074982e.851308"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","port":"80","name":"MyCamKitchen"}]

Device Node

When this node is triggered (by means of an input message), it will generate an output message msg.payload containing information about that device:

• Device information: brand, type, ...
• Hostname: host name
• System date and time: clock of the camera. This is the only information that is available without authorization (although I experienced that some camera's return a Not Authorized).
• Services: all services offered by the device.
• Capabilities: all capabilities offered by the device.
• Scopes: all scopes offered by the device.
• Service capabilities: all service capabilities offered by the device.
• Reboot: reboot the device remotely.
• Reconnect: reconnect to the device again.

TODO Reconnect fails for my Panasonic (unauthorized), because getSystemDateTime is called underneath. Normally getSystemDateTime is the only Onvif functionality that shouldn't require credentials ...

When no action has been specified in the node's config screen, the action needs to be defined in the msg.action of the input message:

[{"id":"bacb880f.853a88","type":"inject","z":"26dbe156.c7049e","name":"Get device information","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":260,"y":1520,"wires":[["90cf9e45.fef83"]]},{"id":"90cf9e45.fef83","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getDeviceInformation","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1520,"wires":[["569d0223.dcc0cc"]]},{"id":"c17d3b0c.763f78","type":"inject","z":"26dbe156.c7049e","name":"Get services","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":230,"y":1640,"wires":[["b2189543.3cbc28"]]},{"id":"b2189543.3cbc28","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getServices","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1640,"wires":[["569d0223.dcc0cc"]]},{"id":"d710fda6.e8aae","type":"inject","z":"26dbe156.c7049e","name":"Get system datetime","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":250,"y":1600,"wires":[["cc3c9656.8496a8"]]},{"id":"cc3c9656.8496a8","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getSystemDateAndTime","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1600,"wires":[["569d0223.dcc0cc"]]},{"id":"a744dbdf.67e6c8","type":"inject","z":"26dbe156.c7049e","name":"Get capabilities","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":240,"y":1680,"wires":[["5d9e78c8.149b38"]]},{"id":"5d9e78c8.149b38","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getCapabilities","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1680,"wires":[["569d0223.dcc0cc"]]},{"id":"c4b35b2e.3088b8","type":"inject","z":"26dbe156.c7049e","name":"Get scopes","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":230,"y":1720,"wires":[["65b4227b.29ca5c"]]},{"id":"65b4227b.29ca5c","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getScopes","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1720,"wires":[["569d0223.dcc0cc"]]},{"id":"d86390ea.9497c","type":"inject","z":"26dbe156.c7049e","name":"System reboot","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":240,"y":1760,"wires":[["b977019e.b468"]]},{"id":"b977019e.b468","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"systemReboot","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1760,"wires":[["569d0223.dcc0cc"]]},{"id":"b42d91a3.9ce6","type":"inject","z":"26dbe156.c7049e","name":"Get service capabilities","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":260,"y":1800,"wires":[["54209451.26faec"]]},{"id":"54209451.26faec","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getServiceCapabilities","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1800,"wires":[["569d0223.dcc0cc"]]},{"id":"43651b47.8d7824","type":"inject","z":"26dbe156.c7049e","name":"Get hostname information","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":270,"y":1560,"wires":[["d49b6d87.e936d"]]},{"id":"d49b6d87.e936d","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getHostname","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1560,"wires":[["569d0223.dcc0cc"]]},{"id":"6227d5ec.51a9ec","type":"inject","z":"26dbe156.c7049e","name":"Reconnect to device","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":250,"y":1840,"wires":[["c24552ea.311e3"]]},{"id":"c24552ea.311e3","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"reconnect","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":500,"y":1840,"wires":[["569d0223.dcc0cc"]]},{"id":"569d0223.dcc0cc","type":"onvif-device","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","action":"","x":730,"y":1520,"wires":[["7c39ee64.2d193"]]},{"id":"7c39ee64.2d193","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","x":890,"y":1520,"wires":[]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

Event Node

This node allows to listen to all the events pushed by the device. Depending on the device, different events can be pushed to the clients that are listening:

• Motion detection
• Face detection
• CPU percentage
• ...

The more embedded electronics your camera contains (e.g. PIR sensor, microphone, external I/O input, ...), the more events might be available:

CAUTION: You need to enable those events once manually (via the web interface of your camera), because that is not part of the Onvif protocol! For example the web interface of my Hikvision camera:

The node will start listening to events when msg.action=start arrives and stops listening when msg.action=stop arrives. When the node is listening, every event (pushed by the Onvif device toward the Node-RED flow) will be converted to an output message:

[{"id":"748f5110.c57f7","type":"inject","z":"b3db206e.b7139","name":"Start listening","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":150,"y":1020,"wires":[["12ad9448.0899fc"]]},{"id":"12ad9448.0899fc","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"start","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":460,"y":1020,"wires":[["a8f7752e.2998f8"]]},{"id":"801f0dd.3e0b3f","type":"inject","z":"b3db206e.b7139","name":"Stop listening","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":150,"y":1060,"wires":[["b7dc815b.29f4a"]]},{"id":"b7dc815b.29f4a","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"stop","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":460,"y":1060,"wires":[["a8f7752e.2998f8"]]},{"id":"2774034b.91102c","type":"inject","z":"b3db206e.b7139","name":"Get event properties","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":170,"y":1140,"wires":[["e59923ee.4db8d"]]},{"id":"e59923ee.4db8d","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getEventProperties","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":460,"y":1140,"wires":[["a8f7752e.2998f8"]]},{"id":"120e35a2.b4da5a","type":"inject","z":"b3db206e.b7139","name":"Get event service capabilities","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":200,"y":1100,"wires":[["2c1017b7.e2e448"]]},{"id":"2c1017b7.e2e448","type":"change","z":"b3db206e.b7139","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getEventServiceCapabilities","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":460,"y":1100,"wires":[["a8f7752e.2998f8"]]},{"id":"a8f7752e.2998f8","type":"onvif-events","z":"b3db206e.b7139","name":"","deviceConfig":"c6b46a46.8067f8","action":"","x":670,"y":1020,"wires":[["61d49191.38fb9"]]},{"id":"61d49191.38fb9","type":"switch","z":"b3db206e.b7139","name":"Topic ProcessorUsage","property":"topic","propertyType":"msg","rules":[{"t":"eq","v":"Monitoring/ProcessorUsage","vt":"str"}],"checkall":"true","repair":false,"outputs":1,"x":880,"y":1020,"wires":[["9d4463a2.1d43d"]]},{"id":"9d4463a2.1d43d","type":"change","z":"b3db206e.b7139","name":"Get value","rules":[{"t":"set","p":"payload","pt":"msg","to":"data.value","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":1080,"y":1020,"wires":[["97abe077.30ed"]]},{"id":"97abe077.30ed","type":"ui_chart","z":"b3db206e.b7139","name":"Camera CPU %","group":"22787703.a0e968","order":2,"width":0,"height":0,"label":"Camera CPU %","chartType":"line","legend":"false","xformat":"HH:mm:ss","interpolate":"linear","nodata":"","dot":false,"ymin":"0","ymax":"110","removeOlder":1,"removeOlderPoints":"50","removeOlderUnit":"3600","cutout":0,"useOneColor":false,"colors":["#1f77b4","#aec7e8","#ff7f0e","#2ca02c","#98df8a","#d62728","#ff9896","#9467bd","#c5b0d5"],"useOldStyle":false,"outputs":1,"x":1260,"y":1020,"wires":[[]]},{"id":"c6b46a46.8067f8","type":"onvif-config","z":"","xaddress":"192.168.1.174","port":"80","name":"Hikvision"},{"id":"22787703.a0e968","type":"ui_group","z":"","name":"Web push notifications","tab":"80f0e178.bbf4a","disp":true,"width":"6","collapse":false},{"id":"80f0e178.bbf4a","type":"ui_tab","z":"","name":"Home","icon":"dashboard","order":1,"disabled":false,"hidden":false}]

The above flow will display the camera's CPU usage in the Node-RED dashboard:

The following action values can be passed:

• start: Start listening for events pushed by the Onvif device towards the Node-RED flow.

• stop: Stop listening for events pushed by the Onvif device towards the Node-RED flow.

• getEventServiceCapabilities*: to determine if your camera supports pull point listeners.

  

  The WSPullPointSupport should be true, otherwise your camera doesn't support pull-point events!

• getEventProperties: to determine which events your camera can push. For example for my Hikvision camera:

  

Remarks:

• As soon as the node is listening for events, the node status will change from "connected" to "listening".
• Onvif devices can support 3 types of event transport mechanisms, but currently this node only supports pull-point events. In fact this is not a real push mechanism, which uses polling behind the scenes ...

PTZ Node

This node allows the OnVif device to be PTZ controlled (Pan/Tilt/Zoom), but also offers a home position and multiple preset positions. Of course this is only possible when the camera hardware supports PTZ.

TODO: For cameras without zoom (i.e. only PT) like mine, the getStatus gives an error (so I cannot determine the current PTZ location. See agsh/onvif#103 for which I have to create a pull request.

Moving the camera

An PTZ camera can be remotely controlled to change the direction (vertical and horizontal) and zoom (in and out):

• Pan: Move the camera to the left (value between -1.0 and 0.0) or right (value between 0.0 and 1.0).
• Tilt: Move the camera down (value between -1.0 and 0.0) or up (value between 0.0 and 1.0).
• Zoom: Zoom the camera out (value between -1.0 and 0.0) or in (value between 0.0 and 1.0).

The higher the (absolute) values, the faster the movement will be executed. This means that the motor will turn faster.

Those 3 values can also be set via the input message, when the value is 0 in the node's config screen. The input message fields are respectively msg.pan, msg.tilt and msg.zoom.

An extra Time option can be specified, which is the time interval (in seconds) that the movement will be applied. For example a tilt value of -0.5 with time 2, means that the device will move down at half speed during 2 seconds.

[{"id":"8bbc7b61.cb4188","type":"inject","z":"26dbe156.c7049e","name":"Right","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1330,"y":260,"wires":[["a6e564c.fde6698"]]},{"id":"d5281b45.ea95c8","type":"inject","z":"26dbe156.c7049e","name":"Left","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1330,"y":300,"wires":[["86b893d2.4f029"]]},{"id":"cee5bb21.150338","type":"inject","z":"26dbe156.c7049e","name":"Zoom in","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1340,"y":340,"wires":[["467c1396.0ea46c"]]},{"id":"643c2f21.4f1dc","type":"inject","z":"26dbe156.c7049e","name":"Zoom out","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1340,"y":380,"wires":[["e58c624a.ab789"]]},{"id":"a6e564c.fde6698","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"pan_speed","pt":"msg","to":"0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":260,"wires":[["a11d9175.e42f"]]},{"id":"86b893d2.4f029","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"pan_speed","pt":"msg","to":"-0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":300,"wires":[["a11d9175.e42f"]]},{"id":"467c1396.0ea46c","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"zoom_speed","pt":"msg","to":"0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":340,"wires":[["a11d9175.e42f"]]},{"id":"e58c624a.ab789","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"zoom_speed","pt":"msg","to":"-0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":380,"wires":[["a11d9175.e42f"]]},{"id":"412839c6.6f0b78","type":"inject","z":"26dbe156.c7049e","name":"Stop","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1330,"y":420,"wires":[["a0cfe609.370f98"]]},{"id":"a0cfe609.370f98","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"stop","tot":"str"},{"t":"set","p":"stopPanTilt","pt":"msg","to":"true","tot":"bool"},{"t":"set","p":"stopZoom","pt":"msg","to":"true","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":420,"wires":[["a11d9175.e42f"]]},{"id":"d5076069.ec979","type":"inject","z":"26dbe156.c7049e","name":"Up","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1330,"y":180,"wires":[["2a43b711.797118"]]},{"id":"77155c06.44ac04","type":"inject","z":"26dbe156.c7049e","name":"Down","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1330,"y":220,"wires":[["5ada4b2.f1145b4"]]},{"id":"2a43b711.797118","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"tilt_speed","pt":"msg","to":"0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":180,"wires":[["a11d9175.e42f"]]},{"id":"5ada4b2.f1145b4","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"tilt_speed","pt":"msg","to":"-0.5","tot":"num"},{"t":"set","p":"action","pt":"msg","to":"continuousMove","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1540,"y":220,"wires":[["a11d9175.e42f"]]},{"id":"1e729e64.1ac1c2","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":1990,"y":180,"wires":[]},{"id":"a11d9175.e42f","type":"onvif-ptz","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profile":"1_def_profile3","action":"","panSpeed":0,"tiltSpeed":0,"zoomSpeed":0,"panPosition":0,"tiltPosition":0,"zoomPosition":0,"panTranslation":0,"tiltTranslation":0,"zoomTranslation":0,"time":1,"preset":"","presetName":"","stopPanTilt":true,"stopZoom":true,"configurationToken":"","x":1798,"y":180,"wires":[["1e729e64.1ac1c2"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

Home position

A PTZ camera has a home position, where it will be positioned when nobody is manually controlling the camera. You can use the PTZ control to move the camera to a certain position, and then you 'set' the home position. After the home position has been set, you can again use PTZ control to move the camera around. But when you press the 'goto home position', the camera will automatically go back to the home position that you have set earlier.

[{"id":"326d2b12.c82824","type":"inject","z":"26dbe156.c7049e","name":"Goto home position","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1530,"y":180,"wires":[["fb20eab3.8f6e08"]]},{"id":"fb20eab3.8f6e08","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"gotoHomePosition","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1760,"y":180,"wires":[["ef9555d.c18a2a8"]]},{"id":"5ad9fb27.cde234","type":"inject","z":"26dbe156.c7049e","name":"Set home position","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1530,"y":220,"wires":[["ca5af8d7.7d1858"]]},{"id":"ca5af8d7.7d1858","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setHomePosition","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1760,"y":220,"wires":[["ef9555d.c18a2a8"]]},{"id":"6f2a191d.95af58","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":2170,"y":180,"wires":[]},{"id":"ef9555d.c18a2a8","type":"onvif-ptz","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profile":"1_def_profile3","action":"","panSpeed":0,"tiltSpeed":0,"zoomSpeed":0,"panPosition":0,"tiltPosition":0,"zoomPosition":0,"panTranslation":0,"tiltTranslation":0,"zoomTranslation":0,"time":1,"preset":"","presetName":"","stopPanTilt":true,"stopZoom":true,"configurationToken":"","x":1978,"y":180,"wires":[["6f2a191d.95af58"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

Pre-programmed positions

While a PTZ camera has only a single home position, it will also have multiple preset positions. The number of preset positions available depends on the device manufacturer.

[{"id":"3860ac52.e39594","type":"inject","z":"26dbe156.c7049e","name":"Get presets","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1790,"y":80,"wires":[["982f2ad5.2d9c08"]]},{"id":"982f2ad5.2d9c08","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getPresets","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":80,"wires":[["29cb85ae.8c89ca"]]},{"id":"f7f04caf.8744","type":"inject","z":"26dbe156.c7049e","name":"Set 'first' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1800,"y":120,"wires":[["945a0df7.765ea"]]},{"id":"945a0df7.765ea","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setPreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"first","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":120,"wires":[["29cb85ae.8c89ca"]]},{"id":"414c78cd.e3c7c8","type":"inject","z":"26dbe156.c7049e","name":"Remove 'first' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1810,"y":200,"wires":[["677fe0f0.05929"]]},{"id":"677fe0f0.05929","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"removePreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"first","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":200,"wires":[["29cb85ae.8c89ca"]]},{"id":"7d1c3cb6.e252e4","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"gotoPreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"first","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":280,"wires":[["29cb85ae.8c89ca"]]},{"id":"cf9fb5ac.2929f8","type":"inject","z":"26dbe156.c7049e","name":"Goto 'first' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1800,"y":280,"wires":[["7d1c3cb6.e252e4"]]},{"id":"eabc7f84.63e97","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":2490,"y":80,"wires":[]},{"id":"29cb85ae.8c89ca","type":"onvif-ptz","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profile":"1_def_profile3","action":"","panSpeed":0,"tiltSpeed":0,"zoomSpeed":0,"panPosition":0,"tiltPosition":0,"zoomPosition":0,"panTranslation":0,"tiltTranslation":0,"zoomTranslation":0,"time":1,"preset":"","presetName":"","stopPanTilt":true,"stopZoom":true,"configurationToken":"","x":2298,"y":80,"wires":[["eabc7f84.63e97"]]},{"id":"c882fdef.c80fa","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"setPreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"second","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":160,"wires":[["29cb85ae.8c89ca"]]},{"id":"617bb836.79ada8","type":"inject","z":"26dbe156.c7049e","name":"Set 'second' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1810,"y":160,"wires":[["c882fdef.c80fa"]]},{"id":"96127480.40b808","type":"inject","z":"26dbe156.c7049e","name":"Remove 'second' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1820,"y":240,"wires":[["ce53fe72.a63f5"]]},{"id":"ce53fe72.a63f5","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"removePreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"second","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":240,"wires":[["29cb85ae.8c89ca"]]},{"id":"1897b282.93917d","type":"inject","z":"26dbe156.c7049e","name":"Goto 'second' preset","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1810,"y":320,"wires":[["53cde90a.bfcf48"]]},{"id":"53cde90a.bfcf48","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"gotoPreset","tot":"str"},{"t":"set","p":"presetName","pt":"msg","to":"second","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2060,"y":320,"wires":[["29cb85ae.8c89ca"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]

You could for example set a separate preset position for every of the 3 doors in your room. And afterwards the Node-RED flow could repeat looping over all 3 preset positions, so the camera would be repositioned in time.

For the getPresets command, the output message will contain a list of key-value pairs:

Normally Onvif requires the preset token to be passed in every preset-related command. However because it is easier to work with preset names, all preset-related commands in this node require the preset name to be passed (and the corresponding preset token will automatically be determined behind the scene). For example you can tell your cam to go to the preset position with name "Preset1" (instead of using the token "1"):

Remark: the Onvif protocol will generate a token to unique identify your preset position. To avoid that every Node-RED flow needs to store all the tokens, this node will do the mapping between the tokens and the unique names (that you could choose yourself).

Get PTZ information

A lot of information can be requested from the PTZ node:

• Minimum and maximum pan/tilt positions.
• Minimum and maximum zoom factors.
• Number of available preset positions.
• ...

[{"id":"2d9d8551.c0018a","type":"inject","z":"26dbe156.c7049e","name":"Get nodes","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1800,"y":120,"wires":[["207254a6.890ccc"]]},{"id":"207254a6.890ccc","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getNodes","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2080,"y":120,"wires":[["eaa9238d.ffd3b"]]},{"id":"9aedef2e.69825","type":"inject","z":"26dbe156.c7049e","name":"Get configurations","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1830,"y":160,"wires":[["be886408.707d68"]]},{"id":"be886408.707d68","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getConfigurations","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2080,"y":160,"wires":[["eaa9238d.ffd3b"]]},{"id":"f6c561a5.4b2bd","type":"inject","z":"26dbe156.c7049e","name":"Get configuration options","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1850,"y":200,"wires":[["7ab75a66.7a4044"]]},{"id":"7ab75a66.7a4044","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getConfigurationOptions","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2080,"y":200,"wires":[["eaa9238d.ffd3b"]]},{"id":"9ba5ac30.13fde","type":"inject","z":"26dbe156.c7049e","name":"Get status","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":1800,"y":240,"wires":[["e2a06007.832d6"]]},{"id":"e2a06007.832d6","type":"change","z":"26dbe156.c7049e","name":"","rules":[{"t":"set","p":"action","pt":"msg","to":"getStatus","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":2080,"y":240,"wires":[["eaa9238d.ffd3b"]]},{"id":"c4f1111f.4570a","type":"debug","z":"26dbe156.c7049e","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":2490,"y":120,"wires":[]},{"id":"eaa9238d.ffd3b","type":"onvif-ptz","z":"26dbe156.c7049e","name":"","deviceConfig":"e6c78b2e.fe4dc8","profile":"1_def_profile3","action":"","panSpeed":0,"tiltSpeed":0,"zoomSpeed":0,"panPosition":0,"tiltPosition":0,"zoomPosition":0,"panTranslation":0,"tiltTranslation":0,"zoomTranslation":0,"time":1,"preset":"","presetName":"","stopPanTilt":true,"stopZoom":true,"configurationToken":"","x":2298,"y":120,"wires":[["c4f1111f.4570a"]]},{"id":"e6c78b2e.fe4dc8","type":"onvif-config","z":"","xaddress":"192.168.1.200","name":"MyCamKitchen"}]