Infinity

Infinity is a tool that enables persistent custom firmware on PSP firmware 6.60 and 6.61 for every model.

Compiling from source

Get this psptoolchain, unpack it to some directory. !OTHER TOOLCHAINS MAY CAUSE PROBLEMS, YOU HAVE BEEN WARNED!

Execute this script.

Export PSPDEV variable and add PSPDEV to PATH:

export PSPDEV=/path/to/pspdev

export PATH=$PATH:$PSPDEV/bin

Get required dependencies:

pip3 install pycryptodome ecdsa

Clone the repo:

git clone https://github.com/bibarub/Infinity && cd Infinity

Run cmake:

mkdir build && cd build

cmake -DCMAKE_TOOLCHAIN_FILE=../cmake/psp-toolchain.cmake ..

Finally, run make:

make

The output files will be in build/app directory

Installation

To install infinity you must be on either firmware 6.60 or 6.61. If you have an old version of infinity (< 2.0), then you must uninstall it first by using Chronoswitch 7 or higher.

Download and extract the latest version of infinity. The extracted contents should be:

• standard folder containing the tool for non-PSPgo models.
• pspgo folder contain the tool for PSPgo models.
• README.md this readme file.
• LICENSE a copy of the MIT license covering this software.

Instructions for PSP 1000, 2000, 3000 and Street

Browse into the standard directory in the download and copy the file EBOOT.PBP to the PSP/GAME/UPDATE folder on your PSP. If this folder does not exist you may need to create it.

Instructions for PSPgo

Browse into the pspgo directory in the download and copy the file EBOOT.PBP to the PSP/GAME/UPDATE folder on your PSPgo. If this folder does not exist you may need to create it.

Instructions for all PSP models

Once the correct EBOOT.PBP file has been copied to your PSP, you can run the application to install infinity to your device. Re-running the application after installation will allow you to select which custom firmware you want enabled. You will need to run the installer for the custom firmware before enabling it within the infinity app.

Infinity supports both PRO and ME custom firmwares. Consult the installation material for theses custom firmwares for further instructions.

Troubleshooting

If you're experiencing some issues with infinity after installation there are a few methods you can use to diagnose the problem.

Key-combos

Infinity has several keycombos used for diagnosing issues.

• Holding the HOME button on boot will start the PSP without automatically loading a custom firmware. This is useful when you accidentally have a custom firmware enabled but not installed and the PSP is crashing on boot.
• Holding RIGHT TRIGGER + SQUARE will boot infinity into a diagnostic mode. In the event where holding the HOME button doesn't work this could be a way to figure out if there is some technical issue initiating the kernel exploit. The file will be written to infinity_error.bin on the root of the memory stick (even on PSPgo).
• Holding RIGHT TRIGGER + TRIANGLE will boot infinity into a special recovery mode. This recovery mode is very basic and simply loads the file recovery.bin to an address specified in the file and executes it. There is currently no recovery software included with infinity.

Removing infinity

To remove infinity, please use Chronoswitch to reflash the firmware.

Socials

Follow me on twitter @DaveeFTW, and check out my blog.

License

This software is licensed under the MIT license. A copy of the license is available in the LICENSE file.