(12/12) [BUGFIX] Remove from protectedDataStore in onDisconnect path #3608
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Fix a bug where remove() was called in the addMailboxData() failure path. 1. Sender's can't remove mailbox entries. Only the receiver can remove it so even if the previous add() failed and left partial state, the remove() can never succeed. 2. Even if the sender could remove, this path used remove() instead of removeMailboxData() so it wouldn't have succeed anyway. This patch cleans up the failure path as well as adds a precondition for the remove() function to ensure future callers don't use them for ProtectedMailboxStorageEntrys.
Add comments and refactor the body in order to make it easier to understand.
Refactor addProtectedStorageEntry for more readability and add comments to help future readers.
Refactor for readability and add comments for future readers.
Refactor for readability and add comments to help future readers.
Refactor for readability and add comments for future readers.
Removed duplicate log messages that are handled inside the various helper methods and print more verbose state useful for debugging. Updated potentially misleading comments around hashing collisions
…icates Now returns false on duplicate sequence numbers. This matches more of the expected behavior for an add() function when the element previously exists. The only callers are either P2PService users that always increment the sequence number or the onMessage() handler which doesn't verify the return so there will be no visible change other than the increased readability of the code and deduplication of the code paths.
Now returns false if the sequence number of the refresh matches the last operation seen for the specified hash. This is a more expected return value when no state change occurs. The only callers are either P2PService users that always increment the sequence number or the onMessage() handler which doesn't verify the return so there will be no visible change other than the increased readability of the code and deduplication of the code paths.
…duplicate sequence #s Remove operations are now only processed if the sequence number is greater than the last operation seen for a specific payload. The only creator of new remove entrys is the P2PService layer that always increments the sequence number. So, this is either left around from a time where removes needed to work with non-incrementing sequence numbers or just a longstanding bug. With the completion of this patch, all operations now require increasing sequence numbers so it should be easier to reason about the behavior in future debugging.
Use the DI Clock object already available in P2PDataStore, instead of calling System.currentTimeMillis() directly. These two functions have the same behavior and switching over allows finer control of time in the tests.
Deduplicate some code in the ProtectedStorageEntry constructors in preparation for passing in a Clock parameter.
Switch from System.currentTimeMills() to Clock.millis() so dependency injection can be used for tests that need finer control of time. This involves attaching a Clock to the resolver so all fromProto methods have one available when they reconstruct a message. This uses the Injector for the APP and a default Clock.systemDefaultZone is used in the manual instantiations. Work was already done in bisq-network#3037 to make this possible. All tests still use the default system clock for now.
Reduces non-deterministic failures of the refreshTTL tests that resulted from the uncontrollable System.currentTimeMillis(). Now, all tests have extremely fine control over the elapsed time between calls which makes the current and future tests much better.
Add tests for removing expired entries and optionally purging the sequence number map. Now possible since these tests have control over time with the ClockFake. The remove validation needed to be improved since deletes through the expire path don't signal HashMap listeners or write sequence numbers.
The original test would take over 5 seconds. Allow tests to set the number of required entries before purge to a lower value so the tests can run faster with the same confidence.
The custom code to verify the refreshTTLMessage's signature and update an entry isn't necessary. Just have the code construct an updated ProtectedStorageEntry from the existing and new data, verify it, and add it to the map. This also allows the removal of the ProtectedStorageEntry APIs that modify internal state.
The code around validating MailboxStoragePayloads is subtle when a MailboxStoragePayload is wrapped in a ProtectedStorageEntry. Add tests to document the current behavior.
Method bodies are copied from P2PDataStore to separate refactoring efforts and behavior changes. Identified a bug where a ProtectedMailboxStorageEntry mailbox entry could be added, but never removed.
Extract code from P2PDataStore, test it, and use new methods.
Now that the objects can answer questions about valid conditions for add/remove, ask them directly. This also pushes the logging down into the ProtectedStorageEntry and ProtectedMailboxStorageEntry and cleans up the message.
Add toString() for ProtectedStorageEntry so log messages have useful information and clean up the formatting.
Move the signature checks into the objects to clean up the calling code and make it more testable. The testing now has to take real hashes so some work was done in the fixtures to create valid hashable objects.
Move the signature checks into the objects to clean up the calling code and make it more testable.
This mailbox-only check can now exist inside the object for which it belongs. This makes it easier to test and moves closer to allowing the deduplication of the remove() methods.
The current check verifies that the stored Payload.ownerPubKey == stored Entry.ownerPubKey. This is the same check that was done when the item was originally added and there is no reason to do it again.
Let the objects compare their metadata instead of doing it for them. This allows for actual unit testing and paves the way for deduplicating the remove code paths. This patch also removes an unnecessary check around comparing the hash of the stored data to the new data's hash. That check can't fail since the hash was a requirement for the map lookup in the first place.
Make the remove validation more robust by asserting that the correct remove message is broadcast. This will provide a better safety net when combining the remove functions.
Now that all the code is abstracted and tested, the remove() and removeMailboxData() functions are identical. Combine them and update callers appropriately. Now, any caller don't need to know the difference and it removes the sharp edge originally found in bisq-network#3556
Use a more compact version of string formatting in log messages Rename isMetadataEquals to matchesRelevantPubKey which is more descriptive of the actual check
Now that the unit tests cover all of the per-Entry validation, the tests that create specific configuration of ProtectedStorageEntry and ProtectedMailboxStorageEntry objects can be removed in favor of mockable Entrys. Using mocks prior to this patch was impossible due to the relationship between the Entry objects and the P2PDataStorage helper functions. Now that the objects are properly abstracted and tested, real unit tests can be written for the P2PDataStore module. This patch leaves the tests and adds an @ignore so the reviewer can see which unit test now supersedes the integration test.
Purge all the superseded tests and helper functions now that everything can be unit tested.
Add JavaDocs for the various Stub and Fake objects that are used in the P2PDataStore test so future developers can understand why they exist.
One monolithic test was useful when it was under development to reduce code churn, but now that the tests are complete it is easier to find and run a specific test when separated into separate test files. This also fixes a downside of Enclosed.class that didn't allow individual tests to be run in intellij.
All users pass in an instance of TestState, just make it an instance method instead of static.
All test callers now just ask the TestState for a SavedTestState instead of SavedTestState ctor. This makes more sense with the object relationship since SavedTestState is only used internally to TestState.
File name now reflects the actual tests run after everything was split up.
It is currently possible to construct a valid Payload object that implements both the ProtectedStoragePayload and PersistableNetworkPayload interfaces even though this combination is invalid. Instead of depending on future reviewers to catch an error, assert that ProtectedStoragePayloads and PersistableNetworkPayloads are incompatible as objects inside a ProtectedStorageEntry. This allows cleanup of removeExpiredEntries that branched on this behavior.
* All of this work is done on the UserThread so there is no need to clone the map. * ArrayList objects are faster to iterate than HashSets and the data is guaranteed to be unique since the source is a ConcurrentHashMap * Finding all items to remove first, then removing them all is an easier to read code pattern instead of removing during iteration.
The code to remove expired Entrys in the onDisconnect path was not correctly removing the Entry from the protectedDataStore. This patch adds a test that failed and fixes the bug.
Previously, the expire path, the remove path, and the onDisconnect all used separate logic for updating the map, signaling listeners, and removing PersistablePaylod objects from the data store. This led to a bug where the onDisconnect path did not update the protectedDataStore. Combine the three code paths to ensure that the same state is updated regardless of the context.
julianknutsen
force-pushed
the
fix-ondisconnect-bug
branch
from
bd14e6a to
9ffbcf7
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
New commits start: b10a603
Fixes a bug in the P2PDataStore::onDisconnect path where a PersistablePayload would not be removed from the protectedDataStore.