It’s that editor.
Some more information at: https://github.com/bisqwit/compiler_series/tree/master/ep1/dostools
It is a programming editor for DOS environments. More specifically, it is something that looks like a programming editor for DOS environments.
Provided strictly AS-IS, with a mild warning that you really do not want to use this editor. Seriously. It won’t do you any good. Get a real editor (https://joe-editor.sourceforge.io/) instead. You can get it to look pretty much identical, and if you want a window sitter to go with it, get e.g. MaCoPiX.
I am a video producer at YouTube. I make programming videos featuring diverse topics from snake games to 3D engines.
I normally use Joe for all my editing purposes — whether programming or otherwise. It is a terminal-based editor, so I run it in Xterm. Yes, even under Windows.
But back in 2010 or so, when I began making these videos, I had too slow hardware to do any kind of desktop recording in real time. This situation persisted until 2016. However, DOSBox contains a full-featured simulated environment with a built-in video recorder that works perfectly regardless of what kind of computer you run it on. So I had to use DOSBox. Incidentally, DOS was already a very familiar platform to me.
My editor was written only because Joe could not be compiled for DOS.
There were other syntax-coloring editors for DOS, and I actually wanted to and did use Borland C++ 3.1 IDE for some of my earlier videos.
But then I wanted to make a video with wider screen, and despite my best efforts, I could not binary-patch Borland C++ to perfectly cooperate with screens that have other width than 80 characters. So I was cornered and had no choice but to make my own editor. I could no longer remember how to use Turbo Vision, and I couldn’t bother to study, so I wrote the editor entirely from scratch.
I wrote the editor for 16-bit DOS because I thought there would be significant troubles trying to mix 16-bit interrupt callbacks with 32-bit protected-mode code. Also I don’t think I knew back then, that DJGPP has been as modernized as it indeed has. If it even was. So I used Borland C++ 3.1.
This compiler by Borland was created before C++ was standardized, and it required me to make many sacrifices about style / sanity in the source code. For example, it did not support namespaces or templates. No STL! As such, the code is not representative of good programming practices for C++ programming, not by a long shot.
Incidentally, because it’s 16-bit, it also has serious memory limits and other bugs associated with it. Eventually this forced me to port it for 32-bit DJGPP despite my initial fears. I completed this port on 2018-01-12 in just a couple of hours (huh, maybe the coding style was not that bad after all). It can be found in the 32bit directory. Note that despite this DJGPP port being compiled on very modern GCC 7.2.0 with support for C++17, the codebase is still almost exactly the same as the Borland C++ version.
Did you miss the part where I warned you really don’t want to use this editor?
You did? Ok. The editor uses most of the same inputs as Joe, my favorite editor.
You can find the list of keybindings in the doc/
subdirectory.
It represents the editor buffer as a vector of lines. Each line is a vector of an element type that encodes both the character and its current color attribute. This color attribute used to be a VGA-compatible 8-bit attribute byte, but in commits 7321f15a and 05eaf3c7 I added support for xterm-256color compatible extended color attributes, which incidentally doubled the memory usage of the editor. This requires special support from DOSBox.
Syntax highlighting operates on a state machine that is modelled after the syntax highlighting engine in Joe. In fact, this editor uses the exact same JSF files to configure the syntax highlighting as Joe does. You can learn more about the JSF system in the JSF files that come with Joe.
Syntax highlighting is applied in real time using a virtual callback that supports two options: Get next character, and recolor some previous section using a select attribute. The source code file is continuously scanned from beginning to the end until everything has been scanned at least once since the last update.
1615 1211 8 0
+-+---+-+---+--------+
|B|bbb|I|fff|cccccccc|
+-+---+-+---+--------+
B = blink
bbb = background color (0-7)
I = high-intensity
fff = foreground color (0-7)
ccc = character code (0-255)
With extended attribute (requires patched DOSBox):
323130292827262524 1615 8 0
+-+-+-+-+-+-+-+-+--------+-+-------+--------+
|1|f|B|v|o|i|d|u|bbbbbbbb|1|fffffff|cccccccc|
+-+-+-+-+-+-+-+-+--------+-+-------+--------+
1 = Extended attribute flag
fff = foreground color (0-255); note MSB is stored separately
B = blink
v = inverse
o = bold
i = italic
d = dim
u = underline
bbb = background color (0-255)
ccc = character code (0-255)
Without extended attribute (compatible with any DOS system):
32 1615 12 8 0
+----------------+-+---+----+--------+
|0000000000000000|B|bbb|ffff|cccccccc|
+----------------+-+---+----+--------+
B = blink
bbb = background color (0-7)
fff = foreground color (0-15)
ccc = character code (0-255)
This attribute word is stored in the video RAM in such manner, that the first 16 bits go into the page at B800:0000, but the top 16 bits go simultaneously to the page at B000:0000. DOSBox was specifically modified to account for this data and to render it properly. The doubling of the attribute bit is there to avoid false positives.
SGR features of ANSI codes that are not supported yet:
- Double-underline is not supported
- Strikeout is not supported
- JSF autoconverts inverse, it is not used in VRAM
- True 24-bit RGB is not supported
As per this chart: https://en.wikipedia.org/wiki/ANSI_escape_code#8-bit
0=Black 1=Red 2=Green 3=Yellow/Brown
4=Blue 5=Magenta 6=Cyan 7=White/Light gray
8-15 = High-intensity versions of 0-7 (where 15=white)
16-231 = 6x6x6 RGB cube
232-255 = Gray ramp
The specific values are:
static unsigned xterm256table[256] =
{ Make(0,0,0), Make(21,0,0), Make(0,21,0), Make(21,5,0),
Make(0,0,21), Make(21,0,21), Make(0,21,21), Make(21,21,21),
Make(7,7,7), Make(31,5,5), Make(5,31,5), Make(31,31,5),
Make(5,5,31), Make(31,5,31), Make(5,31,31), Make(31,31,31) };
static const unsigned char grayramp[24] = { 1,2,3,5,6,7,8,9,11,12,13,14,16,17,18,19,20,22,23,24,25,27,28,29 };
static const unsigned char colorramp[6] = { 0,12,16,21,26,31 };
for(unsigned n=0; n<216; ++n) { xterm256table[16+n] = Make(colorramp[(n/36)%6], colorramp[(n/6)%6], colorramp[(n)%6]); }
for(unsigned n=0; n<24; ++n) { xterm256table[232+n] = Make(grayramp[n],grayramp[n],grayramp[n]); }
In 8x16, 8x14 and 8x8 modes (and 9x16, 9x14, 9x8), the font is whatever the host computer VGA BIOS has in it. The editor does not have a font for these modes. It is assumed that there is a font. This assumption is true.
In 8x15, 8x10, 8x12, 4x8, 8x19 and 8x32 modes, the editor
supplies its own font which is mostly created algorithmically
from the standard IBM PC font by up-/downscaling.
You can find these fonts in the .inc
files in this repository.
No, these are not Windows font files.
This is not a Windows program to begin with.
The temperature information is flavor. It is hardcoded text in the editor. No automatic measurement is performed.
The editor measures the CPU speed periodically while it runs. If run in DOSBox, it also changes the CPU speed constantly. The CPU speed is throttled depending how long it takes for the syntax highlighting to finish after an edit.
The Mario person animation at the top uses the same principle
that Norton tools used on DOS in order to render a graphical mouse cursor in text mode.
It reads the font for those characters that are currently under Mario person,
treats those characters as bitmaps, adds Mario person into them,
and then installs the modified characters in the font and replaces
the character indexes on screen in that spot to refer to the modified
characters.
To build for 16-bit DOS, launch DOSBox and use make.bat
. You may need to edit the paths in make.bat
first.
This requires the following programs to exist:
- Borland C++ 4.52 compiler (bcc.exe) has been tested to work. Version 3.1 may work, but you may need to delete some commandline options.
- Turbo Assembler, any version though 5.0 has been tested to work. TASM 3.1 and 4.1 seem to work, but you have to delete the output files first.
- Turbo Link, any version, though 7.0 has been tested to work.
To build for 32-bit DOS, open a terminal in Linux, go to the 32bit
subdirectory and run make
.
You will need the DJGPP installed, and you need make
of course too.
To install DJGPP on Debian, download from a DJGPP mirror,
such as ftp://ftp.fu-berlin.de/pc/languages/djgpp/rpms/,
the following packages: djcrx-(someversion).rpm
,
djcross-binutils-(someversion).rpm
,
djcross-gcc-(someversion).rpm
, and
djcross-gcc-c++-(someversion).rpm
.
And then run fakeroot alien dj*.rpm
and dpkg -i dj*.deb
.
Example (in a format tiny enough to fit in a 280 character tweet):
sudo apt-get install fakeroot alien wget make
wget -c http://mirrors.fe.up.pt/pub/djgpp/rpms/djcr{oss-{binutils-2.29.1,gcc-7.3.0/djcross-gcc-{,{c++,info,tools}-}7.3.0}-1ap,x-2.05-5}.x86_64.rpm
fakeroot alien dj*.rpm
sudo dpkg -i dj*.deb
DJGPP programs require a 32-bit DOS extender (DOS Protected Mode Interface, DPMI) in order to run. An example DPMI driver (HDPMI32) can be downloaded from https://sourceforge.net/projects/hx-dos/files/ , such as: https://sourceforge.net/projects/hx-dos/files/2.17/hxrt217.7z/download
As of 2018-10-28, the editor can also be compiled on Linux. (64-bit is fine.)
Go to the 32bit
subdirectory and run make e
.
You will need SDL2 library installed with development headers.
Note the usual disclaimers. This editor is not meant to be used by humans.
Caveats:
- This version is hardcoded for Finnish keyboard layout.
- It also uses 8-bit CP437 font. There is no unicode support.
- SDL2 is quite glitchy with how it reports keydown events for ctrl keys. Sometimes it reports a keydown for the plain key, immediately followed by a keydown for the key with ctrl modifier. Sometimes vice versa. This manifests as irritating glitches in this editor when you press ctrl-key combinations. I have tried my best to work around, but it is still glitchy. None of that happens in the DOS version.
- Your window manager will probably eat and suppress half of the hotkeys supported by this program, especially the function keys.
- There is no way to run DOS-inputter with the Linux version. You will have to find other solutions if you want to use automated input.
Sorry!
Paper-thin set pieces. It’s basically Hollywood.
Well, to be honest the editor does support four simultaneous cursors,
full undo+redo…
But testing and development is directed by my video productions.
After all I only ever use this editor for the videos.
And in those videos, I only need very basic set of features.
Look at the doc/
directory for details.
Again I remind that this editor was not designed to be used by people. It was designed to look like it’s being used by people.