Komfovent C6 & C6M Home Assistant Package

Draft under construction

A file for configuring MODBUS connection to a Komfovent Unit

This uses the Home Assistant 'Package' system.

Add it to your config folder (or a subfolder) - just change the path and include this in your configuration.yaml file

homeassistant:
  packages:
    komfovent: !include komfovent.yaml

Add your IP address and it should just work.

Thanks for th ideas from the Community Thread

Features

Switches

Sensors

Where appropriate the sensors all include the correct

• unit_of_measurement
• device_class
• state_class

Register decode Sensors

Convert to State Value

Shell Commands

These negate the need for physical relays

• Kitchen Mode
• Fireplace Mode
• Override Mode

Binary Sensor

Decode register 900

Lovelace Cards

For the sample cards to work, you need to install this button package https://github.com/custom-cards/button-card and this Number card https://github.com/htmltiger/numberbox-card

Main Panel

Note: Humidity and CO₂ are from separate sensors.

Eco Mode

Recuperation (with power off)