Convert all plugin rezconfig to rezconfig.py

Signed-off-by: brycegbrazen <bryce.gattis@brazenanimation.com>

src/rezplugins/package_repository/rezconfig → src/rezplugins/package_repository/rezconfig.py

@@ -1,15 +1,9 @@
-filesystem:
-    # The mechanism used to create the lockfile. If set to 'default', this will
-    # use hardlinks if the 'os.link' method is present, otherwise mkdir is used.
-    # It can also be explicitly set to use only 'hardlink', or only 'mkdir'.
-    # Valid options are 'default', 'mkdir', or 'hardlink'
-    file_lock_type: default
-
+filesystem = {
     # The timeout to use when creating file locks. This is done when a variant is
     # installed into an existing package, to prevent multiple file writes at
     # once (which could result in a variant install getting lost). The timeout
     # value is in seconds. A value of zero indicates no timeout.
-    file_lock_timeout: 10
+    "file_lock_timeout": 10,
 
     # The relative directory, under the repository location, where file locks
     # are created. You might need to use this option when file permissions are
@@ -21,13 +15,13 @@
     #
     # Note: The directory can have any name, but we suggest '.lock' as the
     # standard convention.
-    file_lock_dir:
+    "file_lock_dir": None,
 
     # If True, verify that a potential package directory contains a package.py /
     # package.yaml file before treating it as a package. There *shouldn't* be
     # non-packages in these directories, and the solver is faster if this value
     # is False, because a lot of file stats are avoided.
-    check_package_definition_files: false
+    "check_package_definition_files": False,
 
     # A list of filenames that are expected to contain Rez definitions.
     # The list will be checked in top to bottom order, and the first filename
@@ -39,5 +33,7 @@
     # released package filename, regardless of the definition filename present
     # in the source.
     #
-    package_filenames:
-    - 'package'
+    "package_filenames": [
+        "package"
+    ]
+}

src/rezplugins/release_hook/rezconfig → src/rezplugins/release_hook/rezconfig.py

@@ -1,18 +1,22 @@
-emailer:
+
+emailer = {
     # SMTP host.
-    smtp_host: ''
+    "smtp_host": '',
 
     # SMTP port.
-    smtp_port: 25
+    "smtp_port": 25,
 
     # The address that post-release emails appear to come from.
-    sender: '{system.user}@rez-release.com'
+    "sender": '{system.user}@rez-release.com',
 
     # List of recipients of post-release emails; OR, path to recipients config
     # file (see emailer-recipients-example.yaml). If this is a string that
     # contains '@' and doesn't refer to a filepath, then it's treated as an
     # email address.
-    recipients: []
+    "recipients": [],
+
+    # Subject format - supports the same object formatting available in 'body'
+    "subject": '[rez] [release] {system.user} released {package.qualified_name}',
 
     # Message format. Available objects for formatting are:
     # - package: The package that is being released.
@@ -25,43 +29,43 @@
     # - variants: Namespace for info about the variants that were released:
     #   - count: The number of variants that were released;
     #   - paths: Newline-separated paths to the root of each variant.
-    body: |
-        Package '{package.qualified_name}' was released by {system.user}@{system.fqdn}.
+    "body": \
+"""
+Package '{package.qualified_name}' was released by {system.user}@{system.fqdn}.
 
-        USER: {system.user}
-        PACKAGE: {package.qualified_name}
-        RELEASED TO: {release.path}
-        PREVIOUS VERSION: {release.previous_version}
-        REZ VERSION: {system.rez_version}
+USER: {system.user}
+PACKAGE: {package.qualified_name}
+RELEASED TO: {release.path}
+PREVIOUS VERSION: {release.previous_version}
+REZ VERSION: {system.rez_version}
 
-        {variants.count} VARIANTS:
-        {variants.paths}
+{variants.count} VARIANTS:
+{variants.paths}
 
-        MESSAGE:
-        {release.message}
+MESSAGE:
+{release.message}
 
-        CHANGELOG:
-        {release.changelog}
-
-    # Subject format - supports the same object formatting available in 'body'
-    subject: '[rez] [release] {system.user} released {package.qualified_name}'
+CHANGELOG:
+{release.changelog}
+""".strip()
+}
 
-command:
+command = {
     # If true, print the commands that are being run
-    print_commands: true
+    "print_commands": True,
 
     # If true, print output of commands.
-    print_output: true
+    "print_output": True,
 
     # If true, print failed commands to stderr
-    print_error: true
+    "print_error": True,
 
     # If true, cancel the package release if a pre-* command fails.
-    cancel_on_error: true
+    "cancel_on_error": True,
 
     # If true, skip all commands after a failed command. This does not cancel
     # the package release.
-    stop_on_error: true
+    "stop_on_error": True,
 
     # List of commands to execute prior to build, in given order.
     # Each item is a dict containing:
@@ -82,44 +86,45 @@
     # - release: Namespace for info about the current release, contains:
     #   - path: Installation path of release.
     #
-    # Also, any environment variables references in command arguments are
-    # expanded also.
+    # Any environment variables references in command arguments are expanded.
     #
     # Example:
     # pre_build_commands
     # - command: ls
     #   args: '-a -l'
     #   user: root
     #
-    pre_build_commands: []
+    "pre_build_commands": [],
 
     # Same expected values as pre_build_commands
-    pre_release_commands: []
+    "pre_release_commands": [],
 
     # Same expected values as pre_build_commands
-    post_release_commands: []
+    "post_release_commands": []
+}
 
-amqp:
+amqp = {
     # host server, or '{host}:{port}'
-    host: ''
+    "host": '',
 
     # userid
-    userid: ''
+    "userid": '',
 
     # password
-    password: ''
+    "password": '',
 
     # connection timeout
-    connect_timeout: 10
+    "connect_timeout": 10,
 
     # exchange name
-    exchange_name: ''
+    "exchange_name": '',
 
     # exchange routing key
-    exchange_routing_key: 'REZ.PACKAGE.RELEASED'
+    "exchange_routing_key": 'REZ.PACKAGE.RELEASED',
 
     # message delivery mode
-    message_delivery_mode: 1
+    "message_delivery_mode": 1,
 
     # extra message attributes to be published
-    message_attributes: {}
+    "message_attributes": {}
+}

src/rezplugins/release_vcs/rezconfig → src/rezplugins/release_vcs/rezconfig.py

@@ -1,3 +1,4 @@
-git:
+git = {
     # If false, cancel a package release if there is no upstream branch.
-    allow_no_upstream: false
+    "allow_no_upstream": False
+}

src/rezplugins/shell/rezconfig.py

@@ -0,0 +1,41 @@
+sh = {
+    "prompt": '>',
+    "executable_fullpath": None
+}
+bash = {
+    "prompt": '>',
+    "executable_fullpath": None
+}
+csh = {
+    "prompt": '>',
+    "executable_fullpath": None
+}
+tcsh = {
+    "prompt": '>',
+    "executable_fullpath": None
+}
+zsh = {
+    "prompt": '%',
+    "executable_fullpath": None
+}
+cmd = {
+    "prompt": '$G',
+    "additional_pathext": [".PY"],
+    "executable_fullpath": None
+}
+powershell = {
+    "prompt": '> $ ',
+    "additional_pathext": [".PY"],
+    "executable_fullpath": None,
+    "execution_policy": None
+}
+pwsh = {
+    "prompt": '> $ ',
+    "additional_pathext": [".PY"],
+    "executable_fullpath": None,
+    "execution_policy": None
+}
+gitbash = {
+    "prompt": '>',
+    "executable_fullpath": None
+}