This year's CactusCon electronic badge features a number of sensors that can be used to collect "bio" data.
The badge kit include the following items:
- PCB
- 3.7V 603450 1200mAh LiPo battery
- TTGO T-Display ESP32 dev board
- GY-521 MPU-6050 6-axis gyroscope/accelerometer
- MAX30102 high-sensitivity pulse oximeter and heart rate sensor
- Headers x 2
- Lanyard
- Adhesive foam pad
- Thermal IR sensor
- Piezo speaker
- MQ gas sensor
- Transistor
- 1k ohm SMD resistor
- 0.96" OLED display
** More details to come
Assembly instructions can be found in this document. To begin assembling the included components, skip straight to step C.
The easiest way to install the firmware on the T-Display ESP32 dev board is to use PlatformIO.
-
Install VS Code if you don't already have it installed
-
Install the PlatformIO plugin
-
Clone this git repo
-
Import project
5. Push firmware
Kicad was used to design the this year's badge and you can find the design files here.
What are you going to build with your badge? Share your hacks with us at 'badge at cactuscon com' or on Twitter (@CactusCon)! PRs welcome.