This is a Repository of all things Boxzy. That I have collected of the web. Enjoy
Added a new project https://github.com/chappy1978/BoxzyGrbl
Handy Notes: Information Ive pulled together from various websites.
http://thrinter.com/boxzy-unboxed/ http://thrinter.com/boxzy-stuff/ https://github.com/repetier/Repetier-Firmware/
These aren’t official specs, just what I’ve found from poking around, from kickstarter comments, etc.
Firmware – BoXZY_Repetier_0.10 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2 J-head – not in mine (didn’t get the printer option), but supposedly a SainSmart J-head clone* (based on a link in the kickstarter comments). Don’t know if the mount is compatible with a genuine J-head). Ultimaker main board, Allegro A4988 drivers Arduino Mega – I’m guessing, I didn’t remove the ultimaker board to verify. 2 Watt 445nm laser – Haven’t opened it up to see what’s inside yet. Z-Motor – Casun 57SHD4407-28H X/Y-Motors – Casun 57SHD4407-23H Extruder Motor – 42SHD0424-24B Extruder Gear – looks like a MK7 200W Power Supply AC 90-130V input / 19V 10.53A DC Output Power Supply Fan 12V 40mm x 20mm
M503 output
115200 Baudrate 0.000 Filament printed [m] 0 Printer active [s] 0 Max. inactive time [ms,0=off] 60000 Stop stepper after inactivity [ms,0=off] 160.0000 X-axis steps per mm 160.0000 Y-axis steps per mm 320.0000 Z-axis steps per mm 40.000 X-axis max. feedrate [mm/s] 40.000 Y-axis max. feedrate [mm/s] 20.000 Z-axis max. feedrate [mm/s] 25.000 X-axis homing feedrate [mm/s] 25.000 Y-axis homing feedrate [mm/s] 10.000 Z-axis homing feedrate [mm/s] 5.000 Max. jerk [mm/s] 0.300 Max. Z-jerk [mm/s] 0.000 X home pos [mm] 0.000 Y home pos [mm] 0.000 Z home pos [mm] 165.000 X max length [mm] 165.000 Y max length [mm] 165.000 Z max length [mm] 100.000 X-axis acceleration [mm/s^2] 100.000 Y-axis acceleration [mm/s^2] 25.000 Z-axis acceleration [mm/s^2] 100.000 X-axis travel acceleration [mm/s^2] 100.000 Y-axis travel acceleration [mm/s^2] 25.000 Z-axis travel acceleration [mm/s^2] 0 Autolevel active (1/0) 100.000 Extr.1 steps per mm 100.000 Extr.1 max. feedrate [mm/s] 20.000 Extr.1 start feedrate [mm/s] 10000.000 Extr.1 acceleration [mm/s^2] 3 Extr.1 heat manager [0-3] 255 Extr.1 PID drive max 70 Extr.1 PID drive min 4.0000 Extr.1 PID P-gain/dead-time 0.5000 Extr.1 PID I-gain 15.0000 Extr.1 PID D-gain 255 Extr.1 PID max value [0-255] 0 Extr.1 X-offset [steps] 0 Extr.1 Y-offset [steps] 1 Extr.1 temp. stabilize time [s] 130 Extr.1 temp. for retraction when heating [C] 15 Extr.1 distance to retract when heating [mm] 255 Extr.1 extruder cooler speed [0-255]