Yamaha RX-V773 net radio always buffering

[BitasLT]

Hello
need help or advice

my devices:
1- receiver Yamaha RX-V773
2- X96mini with Armbian 20.10 Arm-64 bullseye current 5.9.0 desktop like a server

actions:

• I run the ytuner 1.2.3 program via x96 mini and go to net radio via yamaha and it shows three options: my station/browse radio/bookmarks, I connect to any internet radio and it always shows buffering and after 1 or 2 minutes it returns to the original radio window .
• after starting the windows version of ytuner, the situation is the same
• In the Yamaha receiver, I change the IP as shown by the program

my problem:

• after turning on any radio, it always shows buffering

[TheBossME]

1st. Have you changed DNS settings in your AVR ?

[TheBossME]

Looked properly set. Have you unplugged the AVR from network and disconnect from Power voltage ?

My AVR buffered old settings.

https://de.yamaha.com/de/support/updates/rx-a720-820_en.html

Which Firmware have you installed ?

[BitasLT]

update is the latest 1.98. I will try to turn it off
from the power and from the Internet. secondly i will try factory reset

[BitasLT]

disconnecting the electric, internet cable and factory settings did not help

[BitasLT]

WORKING!!! I think it's my unknown or a mistake.
solution: I changed Default Gateway from 192.168.182.1 to 192.168.0.1 and now it works

[coffeegreg]

@BitasLT
Of course. 👍 Your AVR's IP address (192.168.0.170) and your subnet mask (255.255.255.0 = /24) point to one class "C" subnet and your gateway must also be in this subnet (192.168.0.x). 👍
I'm glad that YTuner also works properly for you. 😃 🔈 🎶

@TheBossME
Beatrice, thank you for always being there to help. 🌷 I just got home. It was a beautiful and warm day. Good for long walks... 🚶‍♂️