A class providing a simple dataStore for state management.
Run:
npm i -D @composi/datastoreFirst you need to import DataStore into your project. Then you need to create an instance. When doing so, you pass the data you want the dataStore to use. You can also optionally provide a custom event name.
Just pass whatever data you need to use to DataStore. The value can be any valid JavaScript type: boolean, null, undefined, string, array, object, set, weak set, map, weak map.
import { DataStore } from '@composi/datastore'
// Some data for the dataStore.
const fruits = [
{
key: 101,
value: 'Apples'
},
{
key: 102,
value: 'Oranges'
},
{
key: 103,
value: 'Bananas'
}
]
// Initialize the dataStore.
const dataStore = new DataStore(fruits)We can check that our dataStore contains our fruits by checking its state property:
console.log(dataStore.state[0].value) // Apples
console.log(dataStore.state[1].value) // Oranges
console.log(dataStore.state[2].value) // BananasIn the above example our dataStore state was an array. In fact the state and by any type: boolean, string, number, array or object. For complex state you'll probably need an object with many different properties.
You can provide your dataStore with a custom event. However, if you do not provide an event, the dataStore will use its default, which is dataStoreStateChanged. You indicate what event you want to use when you set up a watcher, as described below.
You can assign multiple events to the same dataStore. You can even create multiple watchers for the save event. You can activate any event watcher by sending its event, or by manipulating the dataStore's state with the setState method.
You can tell an event what to do when an event occurrs. There are two things that cause the event to occur: changing the dataStore's state with setState and calling the dataStore's send method.
For now we are going to look at how to set up a watcher for a dataStore. The watch method takes two arguments: an event and a callback to fire. Optionally you can just provide a callback. The dataStore will then use its current event for the callback. The callback gets one parameter: any data passed with the event. In the case of setState, this will be the new state after changes were made.
import { DataStore } from '@composi/datastore'
// Some data for the dataStore.
const fruits = [
{
key: 101,
value: 'Apples'
},
{
key: 102,
value: 'Oranges'
},
{
key: 103,
value: 'Bananas'
}
]
// Initialize the dataStore.
// We provide a custom event as well.
const dataStore = new DataStore(fruits)
// Create a watcher.
// We'll provide a custom event here.
dataStore.watch('fruits-updated', data => {
console.log('The event fired. The new data is:')
console.log(data)
})Now, if we update the data in the list, we will see the results in the console. To update the dataStore's state we need to know how to use setState.
When setting up a watcher, if you use a falsy value for the event, the dataStore will use the default event dataStoreStateChanged. Possible falsy values are: null, undefined, false, 0 and ''.
// Set up a watcher for `dataStoreStateChanged`:
dataStore.watch(null, () => {
console.log('The event "dataStoreStateChanged" was received by this watcher.')
})You can setup the watch with just the callback to use the default event:
// Set up a watcher to use default event `dataStoreStateChanged`:
dataStore.watch(() => {
console.log('The event "dataStoreStateChanged" was received by this watcher.')
})DataStores lets you change their state through use of their setState method. There are two ways to use it. You can pass it an object or you can use a callback. In the case of passing an object as its arugment, the dataStore will merge the object with its state object. Consequently, if your state is not an object, but a string, number or array, this will not work.
import { DataStore } from '@composi/datastore'
const dataStore = new DataStore({
name: 'Shelly'
})
// Merge new object into dataStore's state:
dataStore.setState({job: 'lab technician'})
dataStore.state // {name: 'Shelly', job: 'lab technician'}You can also use a callback with setState. This allows you do do more things in order to update the dataStore state as needed. The callback gets the previous state of the dataStore passed as its argument. You operate on this copy of the dataStore's state. When you are done, you return it. If you forget to return the previous state, the dataStore's state will not get updated.
import { DataStore } from '@composi/datastore'
const dataStore = new DataStore({
name: 'Shelly'
})
// Merge new object into dataStore's state:
dataStore.setState(prevState => {
prevState.job = 'lab technician'
// Return prevState so that the changes register:
return prevState
})
dataStore.state // {name: 'Shelly', job: 'lab technician'}When you use setState to manipulate the dataStore's state, all watchers that you have setup for that dataStore will respond to the changes.
You can send an event that your dataStore is watching. This will cause its watcher to execute with any data you passed with the event. Watchers for other events will not respond. Since it is possible to have multiple watchers for the same event, sending to their event will cause all of them to respond.
import { DataStore } from '@composi/datastore'
const dataStore = new DataStore({
name: 'Joe'
})
// Add a watcher:
dataStore.watch('update-person', data => {
console.log('The event "update-person" was fired. The data received is:')
console.log(data)
})
// send event with data:
dataStore.send('update-person', {name: 'Mary'})
// The event "update-person" was fired. The data received is:
// {name: 'Mary'}You may want a watcher to exist for a limited time, after which you would like to remove it. You can do that with the unwatch method. It takes one argument--the event to unwatch. This deletes it from the dataStore's events property. This also means that all watchers for that event will cease to function.
Please note that you can only unwatch custom events. You can't unwatch the event dataStoreStateChanged because it is the default.
import { DataStore } from '@composi/datastore'
const dataStore = new DataStore({
name: 'Joe'
})
// Add a watcher:
dataStore.watch('update-person', data => {
console.log('The event "update-person" was fired. The data received is:')
console.log(data)
})
// Send event with data:
dataStore.send('update-person', {name: 'Mary'})
// The event "update-person" was fired. The data received is:
// {name: 'Mary'}
// Unwatch event:
dataStore.unwatch('update-person')
// Sending the unwatched event will have no effect:
dataStore.send('update-person', {name: 'Sam'})Sometimes you need to persist some data between user sessions. @composi/datastore provides two methods to make this possible. These are promise-based methods, so they require use of thenables. This makes putting and getting from localStorage non-blocking.
This persists the dataStore's state in localStorage. It uses the key composi-datastore for what it saves. You can set up a watcher to persist state whenever it changes:
// import { DataStore } from '@composi/datastore'
// Create empty dataStore:
const dataStore = new DataStore
// Create a watcher to persist state in localStorage.
// Here we're using the default event `dataStoreStateChanged`.
// When the state changes, it will run this watcher,
// which tells the dataStore to put its state in localStorage.
dataStore.watch(() => {
dataStore.putInLocalStorage()
})As we mentioned, this is promise-based. So, if you wanted to do somehting when the put was complete, you would need to use a thenable:
dataStore.watch(() => {
dataStore.putInLocalStorage()
})
.then(() => console.log('Successfully saved dataStore state in localStorage.'))LocalStorage is very limited. It can't store binary data, only strings. So this method converts your dataStore data to a string using JSON.stringify. Although this is convenient for smaller amounts of data, localStorage is not practical when you have thousands items.
If you need something more robust than localStorage, you might want to use @composi/idb. This is a promise-based wrapper around IndexedDB with a simple API like localStorage. You could use it to persist your dataStore state in a watcher:
dataStore.watch(() => {
idb.set('my-datastore', dataStore.state)
})You can hydrate your dataStore at load time with data you stored in localStorage using putInLocalStorage in a previous session. This is great for simple data persistence needs, especially in early developemnt. Using this technique during development helps you achieve something similar to Hot Module Reloading. Just make sure that the app's UI is based on its dataStore state. That way, when there is a browser refresh during development, the saved data will enable the same UI state to be reloaded.
When trying to hydrate a dataStore with getFromLocalStorage, if there is no data in it, this will throw an error. If you want to provide fallback data, you'll need to do that in a catch statement. Notice how we do this below:
import { h, render } from '@composi/core'
import { DataStore } from '@composi/datastore'
// Create empty dataStore:
const dataStore = new DataStore()
// Setup watcher to render component when state changes:
dataStore.watch('update-list', () => {
render(<List data={dataStore.state}/>, 'section')
})
// Try to rehydrate dataStore from localStorage.
dataStore.getFromLocalStorage()
.then(data => {
if (data) {
dataStore.setState(prevState => {
prevState = data
return prevState
})
}
})
// If there was no data in localStorate,
// the Promise will throw.
// We catch that here and provide default data.
// Because we're using setState on the dataStore,
// this fires the watcher defined above,
// rendering the component with default data.
.catch(() => {
dataStore.setState(prevState => {
prevState = fruits
return prevState
})
dataStore.putInLocalStorage()
})Here's a complete example using getFromLocalStorage to hydrate a dataStore, while also providing a fallback with default data:
import { h, render } from '@composi/core'
import { DataStore } from '@composi/datastore'
const refs = {}
function uuid() {
return Math.random().toString(16).substring(2, 16)
}
// Default data to use.
const fruits = [
{
key: 101,
value: 'Apples'
},
{
key: 102,
value: 'Oranges'
},
{
key: 103,
value: 'Bananas'
}
]
// Create an empty dataStore:
const dataStore = new DataStore()
// Setup a watcher to render the component when state changes:
dataStore.watch('update-list', () => {
render(<List data={dataStore.state}/>, 'section')
})
// Hydrate dataStore with data from localStorage:
dataStore.getFromLocalStorage()
.then(data => {
// If there was data retrieved from localStorage,
// add it to dataStore, which will trigger the watcher.
if (data) {
dataStore.setState(prevState => {
prevState = data
return prevState
})
}
})
// If localStorage has no data,
// this is the first time loading.
// In that case give the dataStore some default data.
.catch(() => {
dataStore.setState(prevState => {
prevState = fruits
return prevState
})
dataStore.putInLocalStorage()
})
// Define component to render.
function List({data}) {
const createInputRef = input => {
if (input)
refs.input = input
}
const addItem = () => {
const value = refs.input && refs.input.value
if (value) {
dataStore.setState(prevState => {
prevState.push({
key: uuid(),
value
})
return prevState
})
refs.input.value = ''
refs.input.focus()
// When data is add, save to localStorage.
dataStore.putInLocalStorage()
.then(() => console.log('Successfully put stuff into localStorage!'))
} else {
alert('Please provide a value before submitting.')
}
}
function deleteItem(key) {
dataStore.setState(prevState => {
const state = prevState.filter(item => item.key != key)
return state
})
// When an item is deleted,
// save new state to localStorage.
dataStore.putInLocalStorage()
.then(() => console.log('Successfully persisted removal of item in localStorage!'))
}
return (
<div>
<p>
<input onmount={createInputRef} type="text"/>
<button onclick={addItem}>Add</button>
</p>
<ul>
{
data.map(item => <li key="item.key">
<span>{item.value}</span>
<button onclick={() => deleteItem(item.key)} className="delete-item">X</button>
</li>)
}
</ul>
</div>
)
}A dataStore has a version. At instantiation time it has a version of 1. You can check the version of a dataStore like this:
console.log(dataStore.version) // 1You can bump the version using bumpVersion. This bumps the version by 1.
dataStore.bumpVersion()
console.log(dataStore.version) // 2
dataStore.bumpVersion()
console.log(dataStore.version) // 3
It's up to you to decide when and how the version gets bumped. Maybe you never need to.
When you save your dataStore state to localStorage with putInLocalStorage it also saves the dataStore's current version with the key composi-datastore-version. You can get this key from localStorage to see how many times the version was bumped.
const dataStoreKey = localStorage.getItem('composi-datastore-version')Each time you save your dataStore state to localStorage with putInLocalStorage, it also saves a timestamp with the key composi-datastore-timestamp. You can retrieve that timestamp from localStorage at load time to see when was the last time the dataStore was backed up. If the timestamp shows that the data is quite stale, you may choose to clear localStorage and populate it with new data.
// After page load:
const timestamp = localStorage.getItem('composi-datastore-timestamp')
const currentTime = new Date().getTime()
// One day in milliseconds.
const day = 1000 * 60 * 60 * 24
// Test to see if timestamp is more than 30 days.
// If it is, clear localStorage:
if ((currentTime - timestamp) / day > 30) {
// Remove the dataStore's key/value.
localStorage.removeItem('composi-datastore')
dataStore.putInLocalStorage()
}