YesPoWer Cryply miner cli version

Brief instructions for miner

Miner is configured under 4 basic processor instructions AVX AVX2 SSE4 SSE2

Miner automatically switches to the new algorithm at the time of the hardfork. You can now start to mine using the new miner. No intervention is required in the work of the miner during the algorithm change.

A list of supported arguments is available when you run the miner with the --help switch.

The miner is started by the command:

miner-sse4.exe --password --threads - url --username

for example (the pool administrator account pool.cryply.io):

miner-sse4.exe -o stratum://pool.cryply.io:3344 -u admin.u -p x -t 10

or you can run miner with config file miner-sse4.exe -c conf.jsom

conf.json example:

{"host": "cryply.luckypool.org", "port": 9996, "username": "Donate.u", "password": "x"}

or

{"host": "cryply.luckypool.org", "port": 9996, "username": "Donate.u", "password": "x", "threads": 1} - with number of threads

If you do not specify the number of cores, the miner himself determines what number of physical cores you have and starts to mine them After hardfork on logical cores it is not recommended to mine. A total hash value when booting on physical cores is higher than when starting on physical + logical cores.

The miner has a built-in donation. How does an integrated donation work? 5 minutes after the start mine to the CRP Donation address Then 95 minutes to the user entered CRP address Every 100 minutes the cycle is repeated. The funds obtained from this miner are used for the further development and maintenance of Cryply products.

You can download miner(Windows, Linux, MacOS versions) on release page

https://github.com/cryply/cryply-cli-miner/releases/tag/1.0