Sync with Linus #152
Merged
Sync with Linus #152
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…g property The MSI Primo81 has a display in portrait mode but a touchscreen in landscape mode. To have both of them use the same coordinate system, the touchscreen-swapped-x-y property has to be set for the touchscreen. Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Don't forget to unlock before returning an error code. Fixes: d787dcd ('bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
When the AP queue depth of requests was reached additional requests have been ignored. These request are stuck in the request queue. The AP queue handling now push the next waiting request into the queue after fetching a previous serviced and finished reply. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This is using completely the wrong mask and value when updating the register. Since the correct values are already defined in the header, switch to using a table with explicit constants rather than shifting the array index. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Currently it is possible for userspace (e.g. QEMU) to set a value for the MSR for a guest VCPU which has both of the TS bits set, which is an illegal combination. The result of this is that when we execute a hrfid (hypervisor return from interrupt doubleword) instruction to enter the guest, the CPU will take a TM Bad Thing type of program interrupt (vector 0x700). Now, if PR KVM is configured in the kernel along with HV KVM, we actually handle this without crashing the host or giving hypervisor privilege to the guest; instead what happens is that we deliver a program interrupt to the guest, with SRR0 reflecting the address of the hrfid instruction and SRR1 containing the MSR value at that point. If PR KVM is not configured in the kernel, then we try to run the host's program interrupt handler with the MMU set to the guest context, which almost certainly causes a host crash. This closes the hole by making kvmppc_set_msr_hv() check for the illegal combination and force the TS field to a safe value (00, meaning non-transactional). Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras <paulus@samba.org>
The condition for checking for XDAT being cleared was not correct. Fixes: 36bcecd ("ASoC: davinci-mcasp: Correct TX start sequence") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a lockdep splat. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
…rnel/git/paulus/powerpc into kvm-master
External inputs to the vgic from time to time need to poke into the state of a virtual interrupt, the prime example is the architected timer code. Since the IRQ's active state can be represented in two places; the LR or the distributor, we first loop over the LRs but if not active in the LRs we just return if *any* IRQ is active on the VCPU in question. This is of course bogus, as we should check if the specific IRQ in quesiton is active on the distributor instead. Reported-by: Eric Auger <eric.auger@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
These are all off by one; the playback and bypass switches are the top two bits of the registers, which are at shifts 7 and 6 not 8 and 7. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Attempting to use this codec driver triggers a BUG() in regcache_sync() since no cache type is set. The register map of this device is fairly small and has few holes so a flat cache is suitable. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Explicitly set the transmit data level on the transceiver to 16 samples rather then the default 0. This matches both the level set in the vendor kernel and the (seemingly very similar) i2s engine. This fixes audio glitches when playing back at 192k rate. At the same time, fix a trivial typo in the TDL mask definition Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
…ux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 4.4" from Maxime Ripard: Allwinner fixes for 4.4 Two patches, one to fix the touchscreen axis on one Allwinner board, and the other one fixing a mutex unlocking issue on one error path in the RSB driver. * tag 'sunxi-fixes-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: bus: sunxi-rsb: unlock on error in sunxi_rsb_read() ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
The 'assigned-clock-parents' and 'assigned-clock-rates' list should corresponding to the 'assigned-clocks' property clock list. Signed-off-by: Bai Ping <b51503@freescale.com> Fixes: ed33936 ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Gateworks Ventana boards seem to need "RGMII-ID" (internal delay) PHY mode, instead of simple "RGMII", for their Marvell 88E1510 transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY driver (TX doesn't seem to work correctly). Tested on GW5400 rev. C. This bug affects ARM Fedora 23. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Tim Harvey <tharvey@gateworks.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Need to include sched.h to fix the following compilation error
if FSL_IFC is enabled on ARM64 machine.
In file included from include/linux/mmzone.h:9:0,
from include/linux/gfp.h:5,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from drivers/memory/fsl_ifc.c:22:
drivers/memory/fsl_ifc.c: In function ‘check_nand_stat’:
include/linux/wait.h:165:35: error: ‘TASK_NORMAL’ undeclared (first use in this function)
#define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL)
^
drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’
wake_up(&ctrl->nand_wait);
^
include/linux/wait.h:165:35: note: each undeclared identifier is reported only once for each function it appears in
#define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL)
^
drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’
wake_up(&ctrl->nand_wait);
^
Analysis is as follows:
I put some instrumental code and get the
following .h files inclusion sequence:
In file included from ./arch/arm64/include/asm/compat.h:25:0,
from ./arch/arm64/include/asm/stat.h:23,
from include/linux/stat.h:5,
from include/linux/module.h:10,
from drivers/memory/fsl_ifc.c:23:
include/linux/sched.h:113:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘struct’
struct sched_attr {
^
CONFIG_COMPAT=y is enabled while 39 and 48 bit VA is selected.
When 42 bit VA is selected, it does not enable CONFIG_COMPAT=y
In ./arch/arm64/include/asm/stat.h:23, it has
"#ifdef CONFIG_COMPAT"
"#include <asm/compat.h>"
"..."
"#endif"
Since ./arch/arm64/include/asm/stat.h does not
include ./arch/arm64/include/asm/compat.h,
then it will not include include/linux/sched.h
Hence we have to manually add "#include <linux/sched.h>"
in drivers/memory/fsl_ifc.c
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We do need to serialize layout stateid morphing operations, but we currently hold the ls_mutex across a layout recall which is pretty ugly. It's also unnecessary -- once we've bumped the seqid and copied it, we don't need to serialize the rest of the CB_LAYOUTRECALL vs. anything else. Just drop the mutex once the copy is done. This was causing a "workqueue leaked lock or atomic" warning and an occasional deadlock. There's more work to be done here but this fixes the immediate regression. Fixes: cc8a553 "nfsd: serialize layout stateid morphing operations" Cc: stable@vger.kernel.org Reported-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Russell King found that he had weird side effects when compiling the kernel with hard linked ccache. The reason was that recordmcount modified the kernel in place via mmap, and when a file gets modified twice by recordmcount, it will complain about it. To fix this issue, Russell wrote a patch that checked if the file was hard linked more than once and would unlink it if it was. Linus Torvalds was not happy with the fact that recordmcount does this in place modification. Instead of doing the unlink only if the file has two or more hard links, it does the unlink all the time. In otherwords, it always does a copy if it changed something. That is, it does the write out if a change was made. Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We are checking dfs_rootdir for error value or NULL. But in the conditional ternary operator we returned -ENODEV if dfs_rootdir contains an error value and returned PTR_ERR(dfs_rootdir) if dfs_rootdir is NULL. So in the case of dfs_rootdir being NULL we actually assigned 0 to err and returned it to the caller implying a success. Lets return -ENODEV when dfs_rootdir is NULL else return PTR_ERR(dfs_rootdir). Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Richard Weinberger <richard@nod.at>
Looks like a typo, using UBI_EC_HDR_SIZE_CRC (note the "EC") to compute the CRC for the VID header. This shouldn't cause any functional change, as both structures are 64 bytes. Verified with: BUILD_BUG_ON(UBI_VID_HDR_SIZE_CRC != UBI_EC_HDR_SIZE_CRC); Reported here: http://lists.infradead.org/pipermail/linux-mtd/2013-September/048570.html Reported by: Bill Pringlemeir <bpringlemeir@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Since fastmap we gained do_sync_erase(). This function can return an error and its error handling isn't obvious. First the memory allocation for struct ubi_work can fail and as such struct ubi_wl_entry is leaked. However if the memory allocation succeeds then the tail function takes care of the struct ubi_wl_entry. A free here could result in a double free. To make the error handling simpler, I split the tail function into one piece which does the work and another which frees the struct ubi_work which is passed as argument. As result do_sync_erase() can keep the struct on stack and we get rid of one error source. Cc: <stable@vger.kernel.org> Fixes: 8199b90 ("UBI: Add fastmap support to the WL sub-system") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
If __erase_worker() fails to erase the EB and schedule_erase() fails as well to do anything about it then we go RO. But that is not a reason to leak the e argument here. Therefore clean up e. Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
This fixes a random corruption under memory pressure. We need to fence the BO for the user fence as well, otherwise it might be swapped out and the GPU could write the fence value to an undesired location. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
The common I/O layer may pass an error value as the irb in the device's interrupt handler (for classic channel I/O). This won't happen in current virtio-ccw implementations, but it's better to be safe than sorry. Let's just return the error conveyed by the irb and clear any possible pending I/O indications. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When power up, a "pop" is heard on line-in and mic-in. An analysis of the PCM shows it lasts ~400ms and looks like a filter response. VAG power up should be delayed by 400ms as VAG power down is. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Signed-off-by: Mark Brown <broonie@kernel.org>
System will misbehave in the following case: - AM43XX only build (UP); - CONFIG_CPU_IDLE=y - ARM TWD timer enabled and selected as clockevent device. In the above case, It's expected that broadcast timer will be used as backup timer when CPUIdle will put MPU in low power states where ARM TWD will stop and lose its context. But, the CONFIG_SMP might not be selected when kernel is built for AM43XX SoC only and, as result, GENERIC_CLOCKEVENTS_BROADCAST option will not be selected also. This will break CPUIdle and System will stuck in low power states. Hence, fix it by selecting GENERIC_CLOCKEVENTS_BROADCAST option for AM43XX SoCs always and add empty tick_broadcast() function implementation - no need to send any IPI on UP. After this change timer1 will be selected as broadcast timer the same way as for SMP, and CPUIdle will work properly. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Make sure to tell the kernel that AM437x devices have ARM TWD timer. Signed-off-by: Felipe Balbi <balbi@ti.com> [grygorii.strashko@ti.com: drop ARM Global timer selection, because it's incompatible with PM (cpuidle/cpufreq). So, it's unsafe to enable it unconditionally] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This is an oversight that made use of the trip-point-based fan managenent on cards that never expose those. This led the fan to stay at fan_min. Fortunately, the emergency code would kick when the temperature would reach 90°C. Reported-by: Tom Englund <tomenglund26@gmail.com> Tested-by: Tom Englund <tomenglund26@gmail.com> Signed-off-by: Martin Peres <martin.peres@free.fr> Tested-by: Daemon32 <lnf.purple@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92126 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
…rg/drm-intel Pull i915 drm fixes from Jani Nikula: "Here's a batch of i915 fixes all around. It may be slightly bigger than one would hope for at this stage, but they've all been through testing in our -next before being picked up for v4.4. Also, I missed Dave's fixes pull earlier today just because I wanted an extra testing round on this. So I'm fairly confident. Wishing you all the things it is customary to wish this time of the year" * tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correct max delay for HDMI hotplug live status checking drm/i915: mdelay(10) considered harmful drm/i915: Kill intel_crtc->cursor_bo drm/i915: Workaround CHV pipe C cursor fail drm/i915: Only spin whilst waiting on the current request drm/i915: Limit the busy wait on requests to 5us not 10ms! drm/i915: Break busywaiting for requests on pending signals drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2) drm/i915: Set the map-and-fenceable flag for preallocated objects drm/i915: Drop the broken cursor base==0 special casing
…l/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This shouldn't be a nightmare before Christmas: just a handful small device-specific fixes for various ASoC and HD-audio drivers. Most of them are stable fixes" * tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2) ASoC: fsl_sai: fix no frame clk in master mode ALSA: hda - Set SKL+ hda controller power at freeze() and thaw() ASoC: sgtl5000: fix VAG power up timing ASoC: rockchip: spdif: Set transmit data level to 16 samples ASoC: wm8974: set cache type for regmap ASoC: es8328: Fix shifts for mixer switches ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx ASoC: es8328: Fix deemphasis values
After hooking up system call, userfaultfd selftest was successful for both 32 and 64 bit version of test. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The "domain" variable needs to be signed for the error handling to work. Fixes: 8def310 (cpufreq: arm_big_little: add SCPI interface driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Constifies sunhv_ops structures in tty's serial driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add ADI (Application Data Integrity) capability to cpu capabilities list. ADI capability allows virtual addresses to be encoded with a tag in bits 63-60. This tag serves as an access control key for the regions of virtual address with ADI enabled and a key set on them. Hypervisor encodes this capability as "adp" in "hwcap-list" property in machine description. Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 28a1f53 delays setting %pil to avoid potential hardirq stack overflow in the common rtrap_irq path. Setting %pil also needs to be delayed in the rtrap_nmi path for the same reason. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When an interrupt (such as a perf counter interrupt) is delivered while executing in user space, the trap entry code puts ASI_AIUS in %asi so that copy_from_user() and copy_to_user() will access the correct memory. But if a perf counter interrupt is delivered while the cpu is already executing in kernel space, then the trap entry code will put ASI_P in %asi, and this will prevent copy_from_user() from reading any useful stack data in either of the perf_callchain_user_X functions, and thus no user callgraph data will be collected for this sample period. An additional problem is that a fault is guaranteed to occur, and though it will be silently covered up, it wastes time and could perturb state. In perf_callchain_user(), we ensure that %asi contains ASI_AIUS because we know for a fact that the subsequent calls to copy_from_user() are intended to read the user's stack. [ Use get_fs()/set_fs() -DaveM ] Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There have been several reports of random processes being killed with a bus error or segfault during userspace stack walking in perf. One of the root causes of this problem is an asynchronous modification to thread_info fault_address and fault_code, which stems from a perf counter interrupt arriving during kernel processing of a "benign" fault, such as a TSB miss. Since perf_callchain_user() invokes copy_from_user() to read user stacks, a fault is not only possible, but probable. Validity checks on the stack address merely cover up the problem and reduce its frequency. The solution here is to save and restore fault_address and fault_code in perf_callchain_user() so that the benign fault handler is not disturbed by a perf interrupt. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Short story: Exception handlers used by some copy_to_user() and copy_from_user() functions do not diligently clean up floating point register usage, and this can result in a user process seeing invalid values in floating point registers. This sometimes makes the process fail. Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions use floating point registers and VIS alignaddr/faligndata to accelerate data copying when source and dest addresses don't align well. Linux uses a lazy scheme for saving floating point registers; It is not done upon entering the kernel since it's a very expensive operation. Rather, it is done only when needed. If the kernel ends up not using FP regs during the course of some trap or system call, then it can return to user space without saving or restoring them. The various memcpy functions begin their FP code with VISEntry (or a variation thereof), which saves the FP regs. They conclude their FP code with VISExit (or a variation) which essentially marks the FP regs "clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned off so that a lazy restore will be triggered when/if the user process accesses floating point regs again. The bug is that the user copy variants of memcpy, copy_from_user() and copy_to_user(), employ an exception handling mechanism to detect faults when accessing user space addresses, and when this handler is invoked, an immediate return from the function is forced, and VISExit is not executed, thus leaving the fprs register in an indeterminate state, but often with fprs.FPRS_FEF set and one or more dirty bits. This results in a return to user space with invalid values in the FP regs, and since fprs.FPRS_FEF is on, no lazy restore occurs. This bug affects copy_to_user() and copy_from_user() for NG4, NG2, U3, and U1. All are fixed by using a new exception handler for those loads and stores that are done during the time between VISEnter and VISExit. n.b. In NG4memcpy, the problematic code can be triggered by a copy size greater than 128 bytes and an unaligned source address. This bug is known to be the cause of random user process memory corruptions while perf is running with the callgraph option (ie, perf record -g). This occurs because perf uses copy_from_user() to read user stacks, and may fault when it follows a stack frame pointer off to an invalid page. Validation checks on the stack address just obscure the underlying problem. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When sysrq is triggered from console, serial driver for SUN hypervisor console receives a console break and enables the sysrq. It expects a valid sysrq char following with break. Meanwhile if driver receives 'NULL' ASCII char then it disables sysrq and sysrq handler will never be invoked. This fix skips calling uart sysrq handler when 'NULL' is received while sysrq is enabled. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull sparc fixes from David Miller:
1) Finally make perf stack backtraces stable on sparc, several problems
(mostly due to the context in which the user copies from the stack
are done) contributed to this.
From Rob Gardner.
2) Export ADI capability if the cpu supports it.
3) Hook up userfaultfd system call.
4) When faults happen during user copies we really have to clean up and
restore the FPU state fully. Also from Rob Gardner
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
tty/serial: Skip 'NULL' char after console break when sysrq enabled
sparc64: fix FP corruption in user copy functions
sparc64: Perf should save/restore fault info
sparc64: Ensure perf can access user stacks
sparc64: Don't set %pil in rtrap_nmi too early
sparc64: Add ADI capability to cpu capabilities
tty: serial: constify sunhv_ops structs
sparc: Hook up userfaultfd system call
…nel/git/deller/parisc-linux Pull parisc system call restart fix from Helge Deller: "The architectural design of parisc always uses two instructions to call kernel syscalls (delayed branch feature). This means that the instruction following the branch (located in the delay slot of the branch instruction) is executed before control passes to the branch destination. Depending on which assembler instruction and how it is used in usersapce in the delay slot, this sometimes made restarted syscalls like futex() and poll() failing with -ENOSYS" * 'parisc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix syscall restarts
* acpi-processor: ACPI / processor: Fix thermal cooling device regression * pm-cpufreq: cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info()
…ernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Sorry for this late pull request, but these are all important fixes for code introduced/updated in this release which we will otherwise end up back porting. - Unwinder rework (A revert followed by better fix) - Build errors: MMUv2, modules with -Os - highmem section mismatch build splat" * tag 'arc-4.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: dw2 unwind: Catch Dwarf SNAFUs early ARC: dw2 unwind: Don't bail for CIE.version != 1 Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing" ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE ARC: mm: fix building for MMU v2 ARC: mm: HIGHMEM: Fix section mismatch splat
…rnel/git/rostedt/linux-trace Pull ftrace/recordmcount fix from Steven Rostedt: "Russell King was reporting lots of warnings when he compiled his kernel with ftrace enabled. With some investigation it was discovered that it was his compile setup. He was using ccache with hard links, which allowed recordmcount to process the same .o twice. When this happens, recordmcount will detect that it was already done and give a warning about it. Russell fixed this by having recordmcount detect that the object file has more than one hard link, and if it does, it unlinks the object file after it maps it and processes then. This appears to fix the issue. As you did not like the fact that recordmcount modified the file in place and thought that it should do the modifications in memory and then write it out to disk and move it over the old file to prevent other more subtle issues like the one above, a second patch is added on top of Russell's to do just that. Luckily the original code had write and lseek wrappers that I was able to modify to not do inplace writes, but simply keep track of the changes made in memory. When a write is made, a "update" flag is set, and at the end of processing, if the update is set, then it writes the file with changes out to a new file, and then renames it over the original one. The file descriptor is still passed to the write and lseek wrappers because removing that would cause the change to be more intrusive. That can be removed in a follow up cleanup patch that can wait till the next merge window" * tag 'trace-v4.4-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/scripts: Have recordmcount copy the object file scripts: recordmcount: break hardlinks
Pull UBI bug fixes from Richard Weinberger: "This contains four bug fixes for UBI" * tag 'upstream-4.4-rc7' of git://git.infradead.org/linux-ubifs: mtd: ubi: don't leak e if schedule_erase() fails mtd: ubi: fixup error correction in do_sync_erase() UBI: fix use of "VID" vs. "EC" in header self-check UBI: fix return error code
Pull md bugfix from Neil Brown: "One more md fix for 4.4-rc Fix a regression which causes reshape to not start properly sometimes" * tag 'md/4.4-rc6-fix' of git://neil.brown.name/md: md: remove check for MD_RECOVERY_NEEDED in action_store.
…nel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix an ACPI processor driver regression introduced during the
4.3 cycle and a mistake in the recently added SCPI support in the
arm_big_little cpufreq driver.
Specifics:
- Fix a thermal management issue introduced by an ACPI processor
driver change made during the 4.3 development cycle that failed to
return 0 from a function on success which triggered an error
cleanup path every time it had been called that deleted useful data
structures created previously (Srinivas Pandruvada).
- Fix a variable data type issue in the arm_big_little cpufreq
driver's SCPI support code added recently that prevents error
handling in there from working correctly (Dan Carpenter)"
* tag 'pm+acpi-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info()
ACPI / processor: Fix thermal cooling device regression
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
…/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smallish set of fixes that we've been sitting on for a while now,
flushing the queue here so they go in. Summary:
A handful of fixes for OMAP, i.MX, Allwinner and Tegra:
- A clock rate and a PHY setup fix for i.MX6Q/DL
- A couple of fixes for the reduced serial bus (sunxi-rsb) on
Allwinner
- UART wakeirq fix for an OMAP4 board, timer config fixes for AM43XX.
- Suspend fix for Tegra124 Chromebooks
- Fix for missing implicit include that's different between
ARM/ARM64"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: Fix suspend hang on Tegra124 Chromebooks
bus: sunxi-rsb: Fix peripheral IC mapping runtime address
bus: sunxi-rsb: Fix primary PMIC mapping hardware address
ARM: dts: Fix UART wakeirq for omap4 duovero parlor
ARM: OMAP2+: AM43xx: select ARM TWD timer
ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST
fsl-ifc: add missing include on ARM64
ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards
ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl
bus: sunxi-rsb: unlock on error in sunxi_rsb_read()
ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
…ream-linus Pull MIPS fixes from Ralf Baechle: - Fix bitrot in __get_user_unaligned() - EVA userspace accessor bug fixes. - Fix for build issues with certain toolchains. - Fix build error for VDSO with particular toolchain versions. - Fix build error due to a variable that should have been removed by an earlier patch * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix bitrot in __get_user_unaligned() MIPS: Fix build error due to unused variables. MIPS: VDSO: Fix build error MIPS: CPS: drop .set mips64r2 directives MIPS: uaccess: Take EVA into account in [__]clear_user MIPS: uaccess: Take EVA into account in __copy_from_user() MIPS: uaccess: Fix strlen_user with EVA
…l/git/jmorris/linux-security Pull key handling bugfix from James Morris: "Fix a race between keyctl_read() and keyctl_revoke()" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix race between read and revoke
…/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug in the algif_skcipher interface that can trigger a kernel WARN_ON from user-space. It does so by using the new skcipher interface which unlike the previous ablkcipher does not need to create extra geniv objects which is what was used to trigger the WARN_ON" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_skcipher - Use new skcipher interface
dabrace
pushed a commit
that referenced
this pull request
Feb 20, 2018
Currently when user changes link properties, TIPC first checks if
user's command message contains media name or bearer name through
tipc_media_find() or tipc_bearer_find() which is protected by RTNL
lock. But when tipc_nl_compat_link_set() conducts the checking with
the two functions, it doesn't hold RTNL lock at all, as a result,
the following complaints were reported:
audit: type=1400 audit(1514679888.244:9): avc: denied { write } for
pid=3194 comm="syzkaller021477" path="socket:[11143]" dev="sockfs"
ino=11143 scontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023
tcontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023
tclass=netlink_generic_socket permissive=1
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
=============================
WARNING: suspicious RCU usage
4.15.0-rc5+ #152 Not tainted
-----------------------------
net/tipc/bearer.c:177 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by syzkaller021477/3194:
#0: (cb_lock){++++}, at: [<00000000d20133ea>] genl_rcv+0x19/0x40
net/netlink/genetlink.c:634
#1: (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_lock
net/netlink/genetlink.c:33 [inline]
#1: (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_rcv_msg+0x115/0x140
net/netlink/genetlink.c:622
stack backtrace:
CPU: 1 PID: 3194 Comm: syzkaller021477 Not tainted 4.15.0-rc5+ #152
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585
tipc_bearer_find+0x2b4/0x3b0 net/tipc/bearer.c:177
tipc_nl_compat_link_set+0x329/0x9f0 net/tipc/netlink_compat.c:729
__tipc_nl_compat_doit net/tipc/netlink_compat.c:288 [inline]
tipc_nl_compat_doit+0x15b/0x660 net/tipc/netlink_compat.c:335
tipc_nl_compat_handle net/tipc/netlink_compat.c:1119 [inline]
tipc_nl_compat_recv+0x112f/0x18f0 net/tipc/netlink_compat.c:1201
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:599
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:624
netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2408
genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1275 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1301
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1864
sock_sendmsg_nosec net/socket.c:636 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:646
sock_write_iter+0x31a/0x5d0 net/socket.c:915
call_write_iter include/linux/fs.h:1772 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:482
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129
In order to correct the mistake, __tipc_nl_compat_doit() has been
protected by RTNL lock, which means the whole operation of setting
bearer/media properties is under RTNL protection.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reported-by: syzbot <syzbot+6345fd433db009b29413@syzkaller.appspotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jun 7, 2018
Trivial fix to remove the following sparse warnings: arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer Also use `--fix` command line option from `script/checkpatch --strict` to remove the following: CHECK: Comparison to NULL could be written "!dispDeviceBase" #72: FILE: arch/powerpc/kernel/btext.c:160: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "!vbase" #80: FILE: arch/powerpc/kernel/btext.c:167: + if (vbase == NULL) CHECK: Comparison to NULL could be written "!base" #89: FILE: arch/powerpc/kernel/btext.c:274: + if (base == NULL) CHECK: Comparison to NULL could be written "!dispDeviceBase" #98: FILE: arch/powerpc/kernel/btext.c:285: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "strstr" #117: FILE: arch/powerpc/kernel/module_32.c:117: + if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL) CHECK: Comparison to NULL could be written "!Hash" #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170: + if (Hash == NULL) CHECK: Comparison to NULL could be written "Hash" #143: FILE: arch/powerpc/mm/tlb_hash32.c:44: + if (Hash != NULL) { CHECK: Comparison to NULL could be written "!Hash" #152: FILE: arch/powerpc/mm/tlb_hash32.c:57: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" torvalds#161: FILE: arch/powerpc/mm/tlb_hash32.c:87: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" torvalds#170: FILE: arch/powerpc/mm/tlb_hash32.c:127: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" torvalds#179: FILE: arch/powerpc/mm/tlb_hash32.c:148: + if (Hash == NULL) { ERROR: space required after that ';' (ctx:VxV) torvalds#192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "node" torvalds#192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "!region" torvalds#201: FILE: arch/powerpc/platforms/powermac/pci.c:1227: + if (region == NULL) CHECK: Comparison to NULL could be written "of_get_property" torvalds#214: FILE: arch/powerpc/platforms/powermac/setup.c:155: + if (of_get_property(np, "cache-unified", NULL) != NULL && dc) { CHECK: Comparison to NULL could be written "!np" torvalds#223: FILE: arch/powerpc/platforms/powermac/setup.c:247: + if (np == NULL) CHECK: Comparison to NULL could be written "np" torvalds#226: FILE: arch/powerpc/platforms/powermac/setup.c:249: + if (np != NULL) { CHECK: Comparison to NULL could be written "l2cr" torvalds#230: FILE: arch/powerpc/platforms/powermac/setup.c:252: + if (l2cr != NULL) { CHECK: Comparison to NULL could be written "via" torvalds#243: FILE: drivers/macintosh/via-pmu.c:277: + if (via != NULL) CHECK: Comparison to NULL could be written "current_req" torvalds#252: FILE: drivers/macintosh/via-pmu.c:1155: + if (current_req != NULL) { CHECK: Comparison to NULL could be written "!req" torvalds#261: FILE: drivers/macintosh/via-pmu.c:1230: + if (req == NULL || pmu_state != idle CHECK: Comparison to NULL could be written "!req" torvalds#270: FILE: drivers/macintosh/via-pmu.c:1385: + if (req == NULL) { CHECK: Comparison to NULL could be written "!pp" torvalds#288: FILE: drivers/macintosh/via-pmu.c:2084: + if (pp == NULL) CHECK: Comparison to NULL could be written "!pp" torvalds#297: FILE: drivers/macintosh/via-pmu.c:2110: + if (count < 1 || pp == NULL) CHECK: Comparison to NULL could be written "!pp" torvalds#306: FILE: drivers/macintosh/via-pmu.c:2167: + if (pp == NULL) CHECK: Comparison to NULL could be written "pp" torvalds#315: FILE: drivers/macintosh/via-pmu.c:2183: + if (pp != NULL) { Link: https://github.com/linuxppc/linux/issues/37 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
dabrace
pushed a commit
that referenced
this pull request
Jul 26, 2018
If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor), we expect afunc_bind() to fail (i.e. return a negative error code). However, due to v4.10-rc1 commit f1d3861 ("usb: gadget: f_uac2: fix error handling at afunc_bind"), afunc_bind() returns zero, telling the caller that it succeeded. This then generates NULL pointer dereference in below scenario on Rcar H3-ES20-Salvator-X target: rcar-gen3:/home/root# modprobe g_audio [ 626.521155] g_audio gadget: afunc_bind:565 Error! [ 626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012 [ 626.533405] g_audio gadget: g_audio ready rcar-gen3:/home/root# rcar-gen3:/home/root# modprobe -r g_audio [ 728.256707] ================================================================== [ 728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545 [ 728.279309] [ 728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G WC 4.14.47+ #152 [ 728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.296454] Call trace: [ 728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364 [ 728.304808] [<ffff200008092924>] show_stack+0x14/0x1c [ 728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174 [ 728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354 [ 728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94 [ 728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 728.499957] ================================================================== [ 728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0 [ 728.517742] Mem abort info: [ 728.520993] Exception class = DABT (current EL), IL = 32 bits [ 728.527375] SET = 0, FnV = 0 [ 728.530731] EA = 0, S1PTW = 0 [ 728.534361] Data abort info: [ 728.537650] ISV = 0, ISS = 0x00000006 [ 728.541863] CM = 0, WnR = 0 [ 728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000 [ 728.552156] [00000000000000a0] *pgd=0000000716a8d003 [ 728.557519] , *pud=00000007116fc003 [ 728.561259] , *pmd=0000000000000000 [ 728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 728.570815] Modules linked in: [ 728.574023] usb_f_uac2 [ 728.576560] u_audio [ 728.578827] g_audio(-) [ 728.581361] libcomposite [ 728.584071] configfs [ 728.586428] aes_ce_blk [ 728.588960] sata_rcar [ 728.591421] crypto_simd [ 728.594039] cryptd [ 728.596217] libata [ 728.598396] aes_ce_cipher [ 728.601188] crc32_ce [ 728.603542] ghash_ce [ 728.605896] gf128mul [ 728.608250] aes_arm64 [ 728.610692] scsi_mod [ 728.613046] sha2_ce [ 728.615313] xhci_plat_hcd [ 728.618106] sha256_arm64 [ 728.620811] sha1_ce [ 728.623077] renesas_usbhs [ 728.625869] xhci_hcd [ 728.628243] renesas_usb3 [ 728.630948] sha1_generic [ 728.633670] ravb_streaming(C) [ 728.636814] udc_core [ 728.639168] cpufreq_dt [ 728.641697] rcar_gen3_thermal [ 728.644840] usb_dmac [ 728.647194] pwm_rcar [ 728.649548] thermal_sys [ 728.652165] virt_dma [ 728.654519] mch_core(C) [ 728.657137] pwm_bl [ 728.659315] snd_soc_rcar [ 728.662020] snd_aloop [ 728.664462] snd_soc_generic_card [ 728.667869] snd_soc_ak4613 [ 728.670749] ipv6 [ 728.672768] autofs4 [ 728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G B WC 4.14.47+ #152 [ 728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000 [ 728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145 [ 728.716620] sp : ffff8006cf6c7a50 [ 728.720154] x29: ffff8006cf6c7a50 [ 728.723760] x28: ffff8006ced38000 [ 728.727272] x27: ffff200008fd7000 [ 728.730857] x26: ffff2000021d2340 [ 728.734361] x25: 0000000000000000 [ 728.737948] x24: ffff200009e94b08 [ 728.741452] x23: 00000000000000a0 [ 728.745052] x22: 00000000000000a8 [ 728.748558] x21: 1ffff000d9ed8f7c [ 728.752142] x20: ffff8006d671a800 [ 728.755646] x19: 0000000000000000 [ 728.759231] x18: 0000000000000000 [ 728.762736] x17: 0000ffffbc7c8f40 [ 728.766320] x16: ffff200008213c4c [ 728.769823] x15: 0000000000000000 [ 728.773408] x14: 0720072007200720 [ 728.776912] x13: 0720072007200720 [ 728.780497] x12: ffffffffffffffff [ 728.784001] x11: 0000000000000040 [ 728.787598] x10: 0000000000001600 [ 728.791103] x9 : ffff8006cf6c77a0 [ 728.794689] x8 : ffff8006ced39660 [ 728.798193] x7 : ffff20000811c738 [ 728.801794] x6 : 0000000000000000 [ 728.805299] x5 : dfff200000000000 [ 728.808885] x4 : ffff8006ced38000 [ 728.812390] x3 : ffff200008fb46e8 [ 728.815976] x2 : 0000000000000007 [ 728.819480] x1 : 3ba68643e7431500 [ 728.823066] x0 : 0000000000000000 [ 728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000) [ 728.833704] Call trace: [ 728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50) [ 728.842987] 7900: 0000000000000000 3ba68643e7431500 [ 728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000 [ 728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0 [ 728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720 [ 728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40 [ 728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c [ 728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000 [ 728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50 [ 728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145 [ 728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500 [ 728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618 [ 728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275) [ 729.108617] ---[ end trace 7560c5fa3d100243 ]--- After this patch is applied, the issue is fixed: rcar-gen3:/home/root# modprobe g_audio [ 59.217127] g_audio gadget: afunc_bind:565 Error! [ 59.222329] g_audio ee020000.usb: failed to start g_audio: -19 modprobe: ERROR: could not insert 'g_audio': No such device rcar-gen3:/home/root# modprobe -r g_audio rcar-gen3:/home/root# Fixes: f1d3861 ("usb: gadget: f_uac2: fix error handling at afunc_bind") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.