Sync up with Linus

Documentation/cgroups/unified-hierarchy.txt

@@ -404,8 +404,8 @@ supported and the interface files "release_agent" and
   be understood as an underflow into the highest possible value, -2 or
   -10M etc. do not work, so it's not consistent.
 
-  memory.low, memory.high, and memory.max will use the string
-  "infinity" to indicate and set the highest possible value.
+  memory.low, memory.high, and memory.max will use the string "max" to
+  indicate and set the highest possible value.
 
 5. Planned Changes
 

Documentation/filesystems/dlmfs.txt

@@ -5,8 +5,8 @@ system.
 
 dlmfs is built with OCFS2 as it requires most of its infrastructure.
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools web page:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.

Documentation/filesystems/ocfs2.txt

@@ -8,8 +8,8 @@ also make it attractive for non-clustered use.
 You'll want to install the ocfs2-tools package in order to at least
 get "mount.ocfs2" and "ocfs2_hb_ctl".
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools git tree:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.

MAINTAINERS

@@ -7213,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mfasheh@suse.com>
 M:	Joel Becker <jlbec@evilplan.org>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
-W:	http://oss.oracle.com/projects/ocfs2/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
+W:	http://ocfs2.wiki.kernel.org
 S:	Supported
 F:	Documentation/filesystems/ocfs2.txt
 F:	Documentation/filesystems/dlmfs.txt

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -195,6 +195,7 @@
 
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usb1 {

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -133,20 +133,6 @@
 		>;
 	};
 
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
 			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
@@ -254,25 +240,18 @@
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c0_pins_default>;
-	pinctrl-1 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_sleep>;
 	clock-frequency = <400000>;
 
 	at24@50 {
 		compatible = "at24,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_default>;
-	pinctrl-1 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
 
 	tps: tps62362@60 {
 		compatible = "ti,tps62362";
+		reg = <0x60>;
 		regulator-name = "VDD_MPU";
 		regulator-min-microvolt = <950000>;
 		regulator-max-microvolt = <1330000>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -549,14 +549,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb2 {
 	dr_mode = "peripheral";
 };

arch/arm/boot/dts/dm8168-evm.dts

@@ -35,6 +35,18 @@
 			DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0)	/* SPI_D1 */
 		>;
 	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB1_DRVVBUS */
+		>;
+	};
 };
 
 &i2c1 {
@@ -127,3 +139,16 @@
 &mmc1 {
 	vmmc-supply = <&vmmcsd_fixed>;
 };
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	mentor,multipoint = <0>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	mentor,multipoint = <0>;
+};

arch/arm/boot/dts/dm816x.dtsi

@@ -97,10 +97,31 @@
 
 			/* Device Configuration Registers */
 			scm_conf: syscon@600 {
-				compatible = "syscon";
+				compatible = "syscon", "simple-bus";
 				reg = <0x600 0x110>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				ranges = <0 0x600 0x110>;
+
+				usb_phy0: usb-phy@20 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x20 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+
+				usb_phy1: usb-phy@28 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x28 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
 			};
 
 			scrm_clocks: clocks {
@@ -357,7 +378,10 @@
 				reg-names = "mc", "control";
 				interrupts = <18>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy0>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;
@@ -366,13 +390,15 @@
 
 			usb1: usb@47401800 {
 				compatible = "ti,musb-am33xx";
-				status = "disabled";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";
 				interrupts = <19>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy1>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;

arch/arm/boot/dts/dra7-evm.dts

@@ -543,14 +543,6 @@
 	};
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

@@ -249,8 +249,8 @@
 				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -1090,8 +1090,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin1>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 

arch/arm/boot/dts/dra72-evm.dts

@@ -380,14 +380,6 @@
 	phy-supply = <&ldo4_reg>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/omap2.dtsi

@@ -87,8 +87,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <64>;
+			dma-channels = <32>;
+			dma-requests = <64>;
 		};
 
 		i2c1: i2c@48070000 {

arch/arm/boot/dts/omap3-n900.dts

@@ -16,6 +16,13 @@
 	model = "Nokia N900";
 	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
+	aliases {
+		i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -704,7 +711,7 @@
 		compatible = "smsc,lan91c94";
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
-		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */
+		reg = <1 0 0xf>;		/* 16 byte IO range */
 		bank-width = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ethernet_pins>;

arch/arm/boot/dts/omap3.dtsi

@@ -155,8 +155,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <96>;
+			dma-channels = <32>;
+			dma-requests = <96>;
 		};
 
 		omap3_pmx_core: pinmux@48002030 {

arch/arm/boot/dts/omap4.dtsi

@@ -223,8 +223,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4a310000 {

arch/arm/boot/dts/omap5.dtsi

@@ -238,8 +238,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -929,8 +929,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 		};