Update my hpsa-next branch with my master branch

Documentation/kernel-parameters.txt

@@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
-			scanned for Logical Units (default 5).
+			scanned for Logical Units (default 1).
 
 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or

MAINTAINERS

@@ -2072,8 +2072,9 @@ F:	drivers/clocksource/bcm_kona_timer.c
 
 BROADCOM BCM2835 ARM ARCHITECTURE
 M:	Stephen Warren <swarren@wwwdotorg.org>
+M:	Lee Jones <lee@kernel.org>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
 S:	Maintained
 N:	bcm2835
 
@@ -9703,11 +9704,6 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
-USB/IP DRIVERS
-L:	linux-usb@vger.kernel.org
-S:	Orphan
-F:	drivers/staging/usbip/
-
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 18
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/arm/boot/dts/vf610-cosmic.dts

@@ -33,6 +33,13 @@
 
 };
 
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@@ -42,6 +49,18 @@
 
 &iomuxc {
 	vf610-cosmic {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
 		pinctrl_fec1: fec1grp {
 			fsl,pins = <
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2

arch/arm/boot/dts/zynq-parallella.dts

@@ -34,6 +34,10 @@
 	};
 };
 
+&clkc {
+	fclk-enable = <0xf>;
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";

arch/arm/common/edma.c

@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/edma.h>
+#include <linux/dma-mapping.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
@@ -1623,6 +1624,11 @@ static int edma_probe(struct platform_device *pdev)
 	struct device_node	*node = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	int			ret;
+	struct platform_device_info edma_dev_info = {
+		.name = "edma-dma-engine",
+		.dma_mask = DMA_BIT_MASK(32),
+		.parent = &pdev->dev,
+	};
 
 	if (node) {
 		/* Check if this is a second instance registered */
@@ -1793,6 +1799,9 @@ static int edma_probe(struct platform_device *pdev)
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
 		}
 		arch_num_cc++;
+
+		edma_dev_info.id = j;
+		platform_device_register_full(&edma_dev_info);
 	}
 
 	return 0;

arch/arm/configs/imx_v4_v5_defconfig

@@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y

arch/arm/mach-imx/clk-vf610.c

@@ -58,34 +58,49 @@
 #define PFD_PLL1_BASE		(anatop_base + 0x2b0)
 #define PFD_PLL2_BASE		(anatop_base + 0x100)
 #define PFD_PLL3_BASE		(anatop_base + 0xf0)
+#define PLL1_CTRL		(anatop_base + 0x270)
+#define PLL2_CTRL		(anatop_base + 0x30)
 #define PLL3_CTRL		(anatop_base + 0x10)
+#define PLL4_CTRL		(anatop_base + 0x70)
+#define PLL5_CTRL		(anatop_base + 0xe0)
+#define PLL6_CTRL		(anatop_base + 0xa0)
 #define PLL7_CTRL		(anatop_base + 0x20)
+#define ANA_MISC1		(anatop_base + 0x160)
 
 static void __iomem *anatop_base;
 static void __iomem *ccm_base;
 
 /* sources for multiplexer clocks, this is used multiple times */
 static const char *fast_sels[]	= { "firc", "fxosc", };
 static const char *slow_sels[]	= { "sirc_32k", "sxosc", };
-static const char *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[]	= { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[]	= { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
 static const char *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
 static const char *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
 static const char *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
 static const char *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[]	= { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[]	= { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_usb_otg", };
 static const char *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[]	= { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
 /* FTM counter clock source, not module clock */
 static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
 static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
 
-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
 	{ .val = 0, .div = 1 },
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 6 },
@@ -120,6 +135,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
 	clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
 
+	/* Clock source from external clock via LVDs PAD */
+	clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
 	clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
@@ -133,31 +151,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
 	clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
 
-	clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
-	clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
-	clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
-	clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
-	clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
-
-	clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
-	clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
-	clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
-	clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
-	clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
-
-	clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
-	clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
-	clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
-	clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
-	clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
-
-	clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
-	/* Enet pll: fixed 50Mhz */
-	clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
-	/* pll6: default 960Mhz */
-	clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
-	/* pll7: USB1 PLL at 480MHz */
-	clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+	clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+	clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+	clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+	clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+	clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+	clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET,    "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+	clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+	clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+
+	clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+	/* Do not bypass PLLs initially */
+	clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+	clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+	clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+	clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+	clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+	clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+	clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+	clk[VF610_CLK_PLL1_SYS]      = imx_clk_gate("pll1_sys",      "pll1_bypass", PLL1_CTRL, 13);
+	clk[VF610_CLK_PLL2_BUS]      = imx_clk_gate("pll2_bus",      "pll2_bypass", PLL2_CTRL, 13);
+	clk[VF610_CLK_PLL3_USB_OTG]  = imx_clk_gate("pll3_usb_otg",  "pll3_bypass", PLL3_CTRL, 13);
+	clk[VF610_CLK_PLL4_AUDIO]    = imx_clk_gate("pll4_audio",    "pll4_bypass", PLL4_CTRL, 13);
+	clk[VF610_CLK_PLL5_ENET]     = imx_clk_gate("pll5_enet",     "pll5_bypass", PLL5_CTRL, 13);
+	clk[VF610_CLK_PLL6_VIDEO]    = imx_clk_gate("pll6_video",    "pll6_bypass", PLL6_CTRL, 13);
+	clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+	clk[VF610_CLK_LVDS1_IN]  = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+	clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+	clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+	clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+	clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+	clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+	clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+	clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+	clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+	clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+	clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+	clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+	clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
 
 	clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
 	clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@@ -167,12 +217,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
 	clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
 
-	clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
-	clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
-	clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+	clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+	clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+	clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
 
-	clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
-	clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+	clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+	clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
 
 	clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
 	clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@@ -191,8 +241,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
 	clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
 
-	clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
-	clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+	clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+	clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
 	clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
 	clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
 	clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);

arch/arm64/configs/defconfig

@@ -35,6 +35,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_XGENE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_KSM=y
@@ -52,6 +55,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_BPF_JIT=y
 # CONFIG_WIRELESS is not set
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
@@ -65,16 +69,17 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
+CONFIG_NET_XGENE=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-CONFIG_NET_XGENE=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
@@ -87,6 +92,11 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+# CONFIG_HMC_DRV is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_XGENE=y
 # CONFIG_HWMON is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -97,13 +107,25 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_XGENE=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set