forked from torvalds/linux
-
Notifications
You must be signed in to change notification settings - Fork 0
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Sync up with Linus #69
Merged
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
In a misguided attempt to avoid an #ifdef, the use of the gp_init_delay module parameter was conditioned on the corresponding RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at the point of use in the code. This meant that the compiler always saw the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be unconditionally defined. This in turn caused "make oldconfig" to ask pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY in cases where it was not even used. This commit avoids these pointless questions by defining gp_init_delay under #ifdef. In one branch, gp_init_delay is initialized to RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus allowing boot-time modification), and in the other branch gp_init_delay is a const variable initialized by default to zero. This approach also simplifies the code at the delay point by eliminating the IS_DEFINED(). Because gp_init_delay is constant zero in the no-delay case intended for production use, the "gp_init_delay > 0" check causes the delay to become dead code, as desired in this case. In addition, this commit replaces magic constant "10" with the preprocessor variable PER_RCU_NODE_PERIOD, which controls the number of grace periods that are allowed to elapse at full speed before a delay is inserted. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
…ine_ptr Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz <roy.franz@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
…/git/paulmck/linux-rcu into core/urgent Pull RCU fix from Paul E. McKenney: "This series contains a single change that fixes Kconfig asking pointless questions." Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pavel Machek reported the following compiler warning on x86/32 CONFIG_HIGHMEM64G=y builds: arch/x86/mm/ioremap.c:344:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Clean up the types in this function by using a single natural type for internal calculations (unsigned long), to make it more apparent what's happening, and also to remove fragile casts. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: jgross@suse.com Cc: roland@purestorage.com Link: http://lkml.kernel.org/r/20150416080440.GA507@amd Signed-off-by: Ingo Molnar <mingo@kernel.org>
The core_pmu does not define cpu_* callbacks, which handles allocation of 'struct cpu_hw_events::shared_regs' data, initialization of debug store and PMU_FL_EXCL_CNTRS counters. While this probably won't happen on bare metal, virtual CPU can define x86_pmu.extra_regs together with PMU version 1 and thus be using core_pmu -> using shared_regs data without it being allocated. That could could leave to following panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8152cd4f>] _spin_lock_irqsave+0x1f/0x40 SNIP [<ffffffff81024bd9>] __intel_shared_reg_get_constraints+0x69/0x1e0 [<ffffffff81024deb>] intel_get_event_constraints+0x9b/0x180 [<ffffffff8101e815>] x86_schedule_events+0x75/0x1d0 [<ffffffff810586dc>] ? check_preempt_curr+0x7c/0x90 [<ffffffff810649fe>] ? try_to_wake_up+0x24e/0x3e0 [<ffffffff81064ba2>] ? default_wake_function+0x12/0x20 [<ffffffff8109eb16>] ? autoremove_wake_function+0x16/0x40 [<ffffffff810577e9>] ? __wake_up_common+0x59/0x90 [<ffffffff811a9517>] ? __d_lookup+0xa7/0x150 [<ffffffff8119db5f>] ? do_lookup+0x9f/0x230 [<ffffffff811a993a>] ? dput+0x9a/0x150 [<ffffffff8119c8f5>] ? path_to_nameidata+0x25/0x60 [<ffffffff8119e90a>] ? __link_path_walk+0x7da/0x1000 [<ffffffff8101d8f9>] ? x86_pmu_add+0xb9/0x170 [<ffffffff8101d7a7>] x86_pmu_commit_txn+0x67/0xc0 [<ffffffff811b07b0>] ? mntput_no_expire+0x30/0x110 [<ffffffff8119c731>] ? path_put+0x31/0x40 [<ffffffff8107c297>] ? current_fs_time+0x27/0x30 [<ffffffff8117d170>] ? mem_cgroup_get_reclaim_stat_from_page+0x20/0x70 [<ffffffff8111b7aa>] group_sched_in+0x13a/0x170 [<ffffffff81014a29>] ? sched_clock+0x9/0x10 [<ffffffff8111bac8>] ctx_sched_in+0x2e8/0x330 [<ffffffff8111bb7b>] perf_event_sched_in+0x6b/0xb0 [<ffffffff8111bc36>] perf_event_context_sched_in+0x76/0xc0 [<ffffffff8111eb3b>] perf_event_comm+0x1bb/0x2e0 [<ffffffff81195ee9>] set_task_comm+0x69/0x80 [<ffffffff81195fe1>] setup_new_exec+0xe1/0x2e0 [<ffffffff811ea68e>] load_elf_binary+0x3ce/0x1ab0 Adding cpu_(prepare|starting|dying) for core_pmu to have shared_regs data allocated for core_pmu. AFAICS there's no harm to initialize debug store and PMU_FL_EXCL_CNTRS either for core_pmu. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20150421152623.GC13169@krava.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
… Mobile Processor) IMC uncore PMUs This uncore is the same as the Haswell desktop part but uses a different PCI ID. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1429569247-16697-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
This keeps all the related PCI IDs together in the driver where they are used. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1429644791-25724-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
… a workload commit f7aa222 Author: Arnaldo Carvalho de Melo <acme@redhat.com> Date: Tue Feb 3 13:25:39 2015 -0300 perf trace: No need to enable evsels for workload started from perf The assumption was that whenever a workload is specified, the attr.enable_on_exec evsel flag would be set, but that is not happening when perf_record_opts.system_wide is set, for instance That resulted in both perf_evlist__enable() and attr.enable_on_exec being not called/set, which made the events to remain disabled while the workload runs, producing no output. Fix it, by calling perf_evlist__enable() in the 'trace' tool when forking and not targetting a workload started from trace v2: Test against !target__none(), as suggested by Namhyung Kim, that is what is used in perf_evsel__config() when deciding if the attr.enable_on_exec flag to be set. More work is needed to cover other cases such as opts->initial_delay. Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-27z7169pvfxgj8upic636syv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were not checking in the inner event processing loop if the forked workload had finished, which, on a busy system, may make it take a long time trying to drain events, entering a seemingly neverending loop, waiting for the system to get idle enough to make it drain the buffers. Fix it by disabling the events when 'done' is true, in the inner loop, to start draining what is in the buffers. Now: [root@ssdandy ~]# time trace --filter-pids 14003 -a sleep 1 | tail 996.748 ( 0.002 ms): sh/30296 rt_sigprocmask(how: SETMASK, nset: 0x7ffc83418160, sigsetsize: 8) = 0 996.751 ( 0.002 ms): sh/30296 rt_sigprocmask(how: BLOCK, nset: 0x7ffc834181f0, oset: 0x7ffc83418270, sigsetsize: 8) = 0 996.755 ( 0.002 ms): sh/30296 rt_sigaction(sig: INT, act: 0x7ffc83417f50, oact: 0x7ffc83417ff0, sigsetsize: 8) = 0 1004.543 ( 0.362 ms): tail/30198 ... [continued]: read()) = 4096 1004.548 ( 7.791 ms): sh/30296 wait4(upid: -1, stat_addr: 0x7ffc834181a0) ... 1004.975 ( 0.427 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1005.390 ( 0.410 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1005.743 ( 0.348 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1006.197 ( 0.449 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1006.492 ( 0.290 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 real 0m1.219s user 0m0.704s sys 0m0.331s [root@ssdandy ~]# Reported-by: Michael Petlan <mpetlan@redhat.com> Suggested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-p6kpn1b26qcbe47pufpw0tex@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building the perf tool for 32-bit ARM results in the following build error due to a combination of an incorrect conversion specifier and compiling with -Werror: builtin-kmem.c: In function ‘print_page_summary’: builtin-kmem.c:644:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] nr_alloc_freed, (total_alloc_freed_bytes) / 1024); ^ builtin-kmem.c:647:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); ^ cc1: all warnings being treated as errors This patch fixes the problem by consistently using PRIu64 for printing out u64 values. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429796437-1790-1-git-send-email-will.deacon@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the built-in, default args. This causes perf builds to fail with: <command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] <built-in>: note: this is the location of the previous definition cc1: all warnings being treated as errors To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it in tools/lib/api. v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1. Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Dirk Gouders <dirk@gouders.net> Cc: Michal Marek <mmarek@suse.cz> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429658381-3039-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
0d68bc9 breaks compiles on RHEL6/OL6: cc1: warnings being treated as errors builtin-kmem.c: In function ‘search_page_alloc_stat’: builtin-kmem.c:322: error: declaration of ‘stat’ shadows a global declaration node = &parent->rb_left; /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_alloc_event’: builtin-kmem.c:378: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_free_event’: builtin-kmem.c:431: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here Rename local variable to pstat to avoid the name conflict. Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1429033773-31383-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In my i386 build, it failed like this: CC event-parse.o event-parse.c: In function 'print_str_arg': event-parse.c:3868:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat] Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Javi Merino <javi.merino@arm.com> Link: http://lkml.kernel.org/r/20150424020218.GF1905@sejong Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit c43cf3e ("xen-blkback: safely unmap grants in case they are still in use") use gnttab_unmap_refs_async() to wait until the mapped pages are no longer in use before unmapping them, but that commit missed the persistent case. Purge persistent pages can't be unmapped either unless no longer in use. Signed-off-by: Bob Liu <bob.liu@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
There are several place using gnttab async unmap and wait for completion, so move the common code to a function gnttab_unmap_refs_sync(). Signed-off-by: Bob Liu <bob.liu@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pin direction configuration was incorrectly overwritten by output and function values in set_mux(). Fix this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Perf top raise a warning if a kernel sample is collected but kernel map is restricted. The warning message needs to dereference al.map->dso... However, previous perf_event__preprocess_sample() doesn't always guarantee al.map != NULL, for example, when kernel map is restricted. This patch validates al.map before dereferencing, avoid the segfault. Before this patch: $ cat /proc/sys/kernel/kptr_restrict 1 $ perf top -p 120183 perf: Segmentation fault -------- backtrace -------- /path/to/perf[0x509868] /lib64/libc.so.6(+0x3545f)[0x7f9a1540045f] /path/to/perf[0x448820] /path/to/perf(cmd_top+0xe3c)[0x44a5dc] /path/to/perf[0x4766a2] /path/to/perf(main+0x5f5)[0x42e545] /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4] /path/to/perf[0x42e674] And gdb call trace: Program received signal SIGSEGV, Segmentation fault. perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? (gdb) bt #0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 #1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855 #2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872 #3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997 #4 cmd_top (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>) at builtin-top.c:1267 #5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 <commands+264>, argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70) at perf.c:371 #6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430 #7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474 #8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589 (gdb) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1429946703-80807-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are missing curly braces which causes find_variable() return wrong value when probing with global variables. This problem can be reproduced as following: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Try to find probe point from debuginfo. Probe point found: generic_perform_write+0 Searching 'global_variable_for_test' variable in context. An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) After this patch: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Converting variable global_variable_for_test into trace event. global_variable_for_test type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/generic_perform_write _stext+1237464 global_variable_for_test=@global_variable_for_test+0:s32 probe:generic_perform_write (on generic_perform_write with global_variable_for_test) You can now use it in all perf tools, such as: perf record -e probe:generic_perform_write -aR sleep 1 Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1429949338-18678-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The futex-requeue benchmark can hang because of missing wakeups once the benchmark is done, ie: [Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms perf: couldn't wakeup all tasks (135/1024) This bug, while perhaps suggesting missing wakeups in kernel futex code, is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page, incorrectly mentioning that the number of requeued tasks is in fact returned, not the wakeups. This patch acknowledges this and updates the corresponding futex_wake code around it. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1429894848.10273.44.camel@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Corrected description and fixed function of --quiet argument. Signed-off-by: Petr Holasek <pholasek@redhat.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1429198699-25039-2-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the race in the beginning of benchmark run when some threads hasn't got assigned curr_cpu yet so they don't occur in nodes-of-process stats and benchmark concludes that all remaining threads are converged already. The race can be reproduced with small amount of threads and some bigger amount of shared process memory, e.g. one process, two threads and 5GB of process memory. Signed-off-by: Petr Holasek <pholasek@redhat.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1429198699-25039-4-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Various formats had their byte ordering implemented incorrectly, and the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you get V4L2_PIX_FMT_YVYU. This was working before commit ad6ac45 ("add new formats support for marvell-ccic driver"). That commit broke the original format support and the OLPC XO-1 laptop showed wrong colors ever since (if you are crazy enough to attempt to run the latest kernel on it, like I did). The email addresses of the authors of that patch are no longer valid, so without a way to reach them and ask them about their test setup I am going with what I can test on the OLPC laptop. If this breaks something for someone on their non-OLPC setup, then contact the linux-media mailinglist. My suspicion however is that that commit went in untested. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: <stable@vger.kernel.org> # for v3.19 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When stopping abnormally, a driver can't return from wait_for_completion. This patch resolved this problem by changing wait_for_completion_timeout from wait_for_completion. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
…scon The omap4_ctrl_pad_readl and omap4_ctrl_pad_writel functions have been removed by commit efde234 but are still used by the OMAP4 ISS driver, resulting in a compilation breakage: drivers/staging/media/omap4iss/iss_csiphy.c: In function 'omap4iss_csiphy_config': drivers/staging/media/omap4iss/iss_csiphy.c:167:2: error: implicit declaration of function 'omap4_ctrl_pad_writel' [-Werror=implicit-function-declaration] omap4_ctrl_pad_writel(cam_rx_ctrl, Fix the problem by using the syscon API to reaplace the control pad API. Lookup the syscon instance by compatible name for now as the OMAP4 ISS driver doesn't support DT yet. Fixes: efde234 ("ARM: OMAP4+: control: remove support for legacy pad read/write") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Alius <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix interpretation of the pmic_mpp_read() return code, negative value means an error. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 77e32c8 ("clockevents: Manage device's state separately for the core") decouples clockevent device's modes from states. With this change when a Xen guest tries to resume, it won't be calling its set_mode op which needs to be done on each VCPU in order to make the hypervisor aware that we are in oneshot mode. This happens because clockevents_tick_resume() (which is an intermediate step of resuming ticks on a processor) doesn't call clockevents_set_state() anymore and because during suspend clockevent devices on all VCPUs (except for the one doing the suspend) are left in ONESHOT state. As result, during resume the clockevents state machine will assume that device is already where it should be and doesn't need to be updated. To avoid this problem we should suspend ticks on all VCPUs during suspend. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The variable for the 'permissive' module parameter used to be static but was recently changed to be extern. This puts it in the kernel global namespace if the driver is built-in, so its name should begin with a prefix identifying the driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: af6fc85 ("xen-pciback: limit guest control of command register") Signed-off-by: David Vrabel <david.vrabel@citrix.com>
…inux/kernel/git/acme/linux into perf/urgent Pull perf tooling fixes from Arnaldo Carvalho de Melo: . Fix a segfault in 'perf top' when kernel map is restricted (Wang Nan) . Fix hung wakeup tasks after requeueing in 'perf bench futex' (Davidlohr Bueso) . Fix bug in perf probe global variables handling, missing curly braces on an if body (He Kuang) . 'perf bench numa' fixes (command line help/handling, etc) (Petr Holasek) . fix the 'perf kmem' build on RHEL6/OL6 (David Ahern) . fix the libtraceevent build on 32-bit arch (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a race window in dlm_get_lock_resource(), which may return a lock resource which has been purged. This will cause the process to hang forever in dlmlock() as the ast msg can't be handled due to its lock resource not existing. dlm_get_lock_resource { ... spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { spin_unlock(&dlm->spinlock); >>>>>>>> race window, dlm_run_purge_list() may run and purge the lock resource spin_lock(&tmpres->spinlock); ... spin_unlock(&tmpres->spinlock); } } Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While setting the time, the RTC TIME register should not be accessed. However due to hardware constraints, setting the RTC time involves sleeping during 100ms. This sleep was done outside the critical section protected by the spinlock, so it was possible to read the RTC TIME register and get an incorrect value. This patch introduces a mutex for protecting the RTC TIME access, unlike the spinlock it is allowed to sleep in a critical section protected by a mutex. The RTC STATUS register can still be used from the interrupt handler but it has no effect on setting the time. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> [4.0] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Corey Minyard <cminyard@mvista.com>
When probing an ACPI table, report a specific error, instead of just returning an error, if _IFT doesn't exist. Signed-off-by: Corey Minyard <cminyard@mvista.com>
… mode start_next_msg() issues a message placed in smi_info->waiting_msg if it is non-NULL. However, sender() sets a message to smi_info->curr_msg and NULL to smi_info->waiting_msg in the context of run_to_completion mode. As the result, it leads an infinite loop by waiting the completion of unissued message when leaving dying message after kernel panic. sender() should set the message to smi_info->waiting_msg not curr_msg. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
The SSIF interface can optionally have an SMBus alert come in when data is ready. Unfortunately, the IPMI spec gives wiggle room to the implementer to allow them to always have the alert enabled, even if the driver doesn't enable it. So implement alerts. If you don't in this situation, the SMBus alert handling will constantly complain. Signed-off-by: Corey Minyard <cminyard@mvista.com>
Lots of little fixes for multi-part messages: The values was not being re-initialized, if something went wrong handling a multi-part message and it got left in a bad state, it might be an issue. The commands were not correct when issuing multi-part reads, the code was not passing in the proper value for commands. Also clean up some minor formatting issues. Get the block number from the right location, limit the maximum send message size to 63 bytes and explain why, and fix some minor sylistic issues. Signed-off-by: Corey Minyard <cminyard@mvista.com>
…ers/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "This includes a trivial warning and adding a Lenovo laptop to an existing quirk. I've held off on things like the latter in the past, but I didn't feel it was risky enough to push out to 4.2. - thinkpad_acpi: Fix warning for static not at beginning - ideapad_laptop: Add Lenovo G40-30 to devices without radio switch" * tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: thinkpad_acpi: Fix warning for static not at beginning ideapad_laptop: Add Lenovo G40-30 to devices without radio switch
Merge misc fixes from Andrew Morton: "16 patches This includes a new rtc driver for the Abracon AB x80x and isn't very appropriate for -rc2. It was still being fiddled with a bit during the merge window and I fell asleep during -rc1" [ So I took the new driver, it seems small and won't regress anything. I'm a softy. - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rtc: armada38x: fix concurrency access in armada38x_rtc_set_time ocfs2: dlm: fix race between purge and get lock resource nilfs2: fix sanity check of btree level in nilfs_btree_root_broken() util_macros.h: have array pointer point to array of constants configfs: init configfs module earlier at boot time mm/hwpoison-inject: check PageLRU of hpage mm/hwpoison-inject: fix refcounting in no-injection case mm: soft-offline: fix num_poisoned_pages counting on concurrent events rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc Documentation: bindings: add abracon,abx80x kasan: show gcc version requirements in Kconfig and Documentation mm/memory-failure: call shake_page() when error hits thp tail page lib: delete lib/find_last_bit.c MAINTAINERS: add co-maintainer for LED subsystem zram: add Designated Reviewer for zram in MAINTAINERS revert "zram: move compact_store() to sysfs functions area"
…-ipmi Pull IPMI fixes from Corey Minyard: "Lots of minor IPMI fixes, especially ones that have have come up since the SSIF driver has been in the main kernel for a while" * tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix multi-part message handling ipmi: Add alert handling to SSIF ipmi: Fix a problem that messages are not issued in run_to_completion mode ipmi: Report an error if ACPI _IFT doesn't exist ipmi: Remove unused including <linux/version.h> ipmi: Don't report err in the SI driver for SSIF devices ipmi: Remove incorrect use of seq_has_overflowed ipmi:ssif: Ignore spaces when comparing I2C adapter names ipmi_ssif: Fix the logic on user-supplied addresses
…ux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix 'perf probe -a' segfault if passed with '' (Wang Nan) - Fix report -T/--threads option (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
…it/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: * Avoid garbage names in efivarfs due to buggy firmware by zeroing EFI variable name. (Ross Lagerwall) * Stop erroneously dropping upper 32 bits of boot command line pointer in EFI boot stub and stash them in ext_cmd_line_ptr. (Roy Franz) * Fix double-free bug in error handling code path of EFI runtime map code. (Dan Carpenter) Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit: f893959 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") removed drop_init_fpu() usage from flush_thread(). This seems to break things for me - the Go 1.4 test suite fails all over the place with floating point comparision errors (offending commit found through bisection). The functional change was that flush_thread() after this commit only calls restore_init_xstate() when both use_eager_fpu() and !used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls restore_init_xstate() regardless of whether current used_math() - apply the same logic here. Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed tsk instead of current, like in the rest of flush_thread(). Tested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Riikonen <priikone@iki.fi> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f893959 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure that xen_swiotlb_init allocates buffers that are DMA capable when at least one memblock is available below 4G. Otherwise we assume that all devices on the SoC can cope with >4G addresses. We do this on ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case. No functional changes on x86. From: Chen Baozi <baozich@gmail.com> Signed-off-by: Chen Baozi <baozich@gmail.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Chen Baozi <baozich@gmail.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7b pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7b ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
…linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar: "An RCU Kconfig fix that eliminates an annoying interactive kconfig question for CONFIG_RCU_TORTURE_TEST_SLOW_INIT" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Control grace-period delays directly from value
…linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also an uncore PMU driver fix and an uncore PMU driver hardware-enablement addition" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix segfault if passed with ''. perf report: Fix -T/--threads option to work again perf bench numa: Fix immediate meeting of convergence condition perf bench numa: Fixes of --quiet argument perf bench futex: Fix hung wakeup tasks after requeueing perf probe: Fix bug with global variables handling perf top: Fix a segfault when kernel map is restricted. tools lib traceevent: Fix build failure on 32-bit arch perf kmem: Fix compiles on RHEL6/OL6 tools lib api: Undefine _FORTIFY_SOURCE before setting it perf kmem: Consistently use PRIu64 for printing u64 values perf trace: Disable events and drain events when forked workload ends perf trace: Enable events when doing system wide tracing and starting a workload perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu
…inux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "EFI fixes, and FPU fix, a ticket spinlock boundary condition fix and two build fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Always restore_xinit_state() when use_eager_cpu() x86: Make cpu_tss available to external modules efi: Fix error handling in add_sysfs_runtime_map_entry() x86/spinlocks: Fix regression in spinlock contention detection x86/mm: Clean up types in xlate_dev_mem_ptr() x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr efivarfs: Ensure VariableName is NUL-terminated
…nux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - fix blkback regression if using persistent grants - fix various event channel related suspend/resume bugs - fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS - SWIOTLB on ARM now uses frames <4 GiB (if available) so device only capable of 32-bit DMA work. * tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq() xen/console: Update console event channel on resume xen/xenbus: Update xenbus event channel on resume xen/events: Clear cpu_evtchn_mask before resuming xen-pciback: Add name prefix to global 'permissive' variable xen: Suspend ticks on all CPUs during suspend xen/grant: introduce func gnttab_unmap_refs_sync() xen/blkback: safely unmap purge persistent grants
Pull infiniband updates from Doug Ledford: "Minor updates for 4.1-rc Most of the changes are fairly small and well confined. The iWARP address reporting changes are the only ones that are a medium size. I had these queued up prior to rc1, but due to the shuffle in maintainers, they did not get submitted when I expected. My apologies for that. I feel comfortable with them however due to the testing they've received, so I left them in this submission" * tag 'for-linus' of git://github.com/dledford/linux: MAINTAINERS: Update InfiniBand subsystem maintainer MAINTAINERS: add include/rdma/ to InfiniBand subsystem IPoIB/CM: Fix indentation level iw_cxgb4: Remove negative advice dmesg warnings IB/core: Fix unaligned accesses IB/core: change rdma_gid2ip into void function as it always return zero IB/qib: use arch_phys_wc_add() IB/qib: add acounting for MTRR IB/core: dma unmap optimizations IB/core: dma map/unmap locking optimizations RDMA/cxgb4: Report the actual address of the remote connecting peer RDMA/nes: Report the actual address of the remote connecting peer RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients iw_cxgb4: enforce qp/cq id requirements iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQs iw_cxgb4: 32b platform fixes iw_cxgb4: Cleanup register defines/MACROS RDMA/CMA: Canonize IPv4 on IPV6 sockets properly
Pull vfio fixes from Alex Williamson: "Fix some undesirable behavior with the vfio device request interface: - increase verbosity of device request channel (Alex Williamson) - fix runaway interruptible timeout (Alex Williamson)" * tag 'vfio-v4.1-rc3' of git://github.com/awilliam/linux-vfio: vfio: Fix runaway interruptible timeout vfio-pci: Log device requests more verbosely
…el/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is a smallish set of pin control fixes for the v4.1 cycle, collected the last two weeks: - fix a real nasty legacy bug that has screwed up the protection of adding pinctrl maps dynamically. Normally this didn't happen so much but Dough Anderson ran into it and fixed it, kudos! - minor driver fixes for Qualcomm spmi, mediatek and Marvell drivers" * tag 'pinctrl-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Don't just pretend to protect pinctrl_maps, do it for real pinctrl: mediatek: mtk-common: initialize unmask pinctrl: qcom-spmi-mpp: Fix input value report pinctrl: qcom-spmi: Fix pin direction configuration pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)
…rnel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "Fix a performance regression and a bug" * tag 'for-f2fs-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: fix wrong error hanlder in f2fs_follow_link Revert "f2fs: enhance multi-threads performance"
dabrace
pushed a commit
that referenced
this pull request
Aug 8, 2016
The caller expects %rdi to remain intact, push+pop it make that happen. Fixes the following kind of explosions on my core2duo machine when trying to reboot or shut down: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69 Hardware name: /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007 task: ffff88012a0b4080 task.stack: ffff880123850000 RIP: 0010:[<ffffffff81003c92>] [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP: 0018:ffff880123853b60 EFLAGS: 00010087 RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800 RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000 R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001 R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018 FS: 00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0 Stack: ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001 ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800 ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13 Call Trace: [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0 [<ffffffff81003e13>] x86_pmu_del+0x43/0x140 [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260 [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0 [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70 [<ffffffff810c8826>] generic_exec_single+0xb6/0x140 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140 [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0 [<ffffffff81113d73>] perf_reboot+0x13/0x40 [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70 [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60 [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40 [<ffffffff81076ae2>] kernel_restart+0x12/0x60 [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0 [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0 [<ffffffff811a83e4>] ? mntput+0x24/0x40 [<ffffffff811894fc>] ? __fput+0x16c/0x1e0 [<ffffffff811895ae>] ? ____fput+0xe/0x10 [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0 [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0 [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [<ffffffff81076e6e>] SyS_reboot+0xe/0x10 [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3 Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf RIP [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP <ffff880123853b60> ---[ end trace 7ec95181faf211be ]--- note: reboot[3070] exited with preempt_count 2 Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Fixes: f596710 ("x86/hweight: Get rid of the special calling convention") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
Nov 14, 2016
Commit 63f53de ("mm: warn about allocations which stall for too long") by error embedded "\n" in the format string, resulting in strange output. [ 722.876655] kworker/0:1: page alloction stalls for 160001ms, order:0 [ 722.876656] , mode:0x2400000(GFP_NOIO) [ 722.876657] CPU: 0 PID: 6966 Comm: kworker/0:1 Not tainted 4.8.0+ #69 Link: http://lkml.kernel.org/r/1476026219-7974-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
Jan 21, 2019
signal handling core calls show_regs() with preemption disabled which on ARC takes mmap_sem for mm/vma access, causing lockdep splat. | [ARCLinux]# ./segv-null-ptr | potentially unexpected fatal signal 11. | BUG: sleeping function called from invalid context at kernel/fork.c:1011 | in_atomic(): 1, irqs_disabled(): 0, pid: 70, name: segv-null-ptr | no locks held by segv-null-ptr/70. | CPU: 0 PID: 70 Comm: segv-null-ptr Not tainted 4.18.0+ #69 | | Stack Trace: | arc_unwind_core+0xcc/0x100 | ___might_sleep+0x17a/0x190 | mmput+0x16/0xb8 | show_regs+0x52/0x310 | get_signal+0x5ee/0x610 | do_signal+0x2c/0x218 | resume_user_mode_begin+0x90/0xd8 Workaround by re-enabling preemption temporarily. Note that the preemption disabling in core code around show_regs() was introduced by commit 3a9f84d ("signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()") to silence a differnt lockdep seen on x86 bakc in 2009. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
dabrace
pushed a commit
that referenced
this pull request
Jul 24, 2019
On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.