Sync up with Linus #87
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
If we're running out of buffer memory when transmitting data, then we want to just delay for a moment, and then continue transmitting the remainder of the message. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
ENOBUFS means that memory allocations are failing due to an actual low memory situation. It should not be confused with being out of socket buffer space. Handle the problem by just punting to the delay in call_status. Reported-by: Neil Brown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
…rectly. If the server tells us that only some state has been revoked, then we need to run the full TEST_STATEID dog and pony show in order to discover which locks and delegations are still OK. Currently we blow away all state, which means that we lose all locks! Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
…ctly Try to handle this for now by invalidating all outstanding layouts for this server and then testing all the open+lock+delegation stateids. At some later stage, we may want to optimise by separating out the testing of delegation stateids only, and adding testing of layout stateids. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
RFC5661 states:
The server has encountered an unrecoverable fault with the
backchannel (e.g., it has lost track of the sequence ID for a slot
in the backchannel). The client MUST stop sending more requests
on the session's fore channel, wait for all outstanding requests
to complete on the fore and back channel, and then destroy the
session.
Ensure we do so...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of just kicking off lease recovery, we should look into the sequence flag errors and handle them. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that the calls to renew_lease() in open_done() etc. only apply to session-less versions of NFSv4.x (i.e. NFSv4.0). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Triggered a compilation warning. Fixes: 2650d71 target: move transport ID handling to the core Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
LIO supports protection types 1,3 so setting a hard-coded SPT=3 is fine for now. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Since a RAM backend device is not really a rotational device, we set it as is_nonrot=1 which will be forwarded in VPD page 0xb1 (block device characteristics) response. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Also clean up the case where we don't find a return-on-close layout segment. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If one or more of the layout segments reports an error during I/O, then we may have to send a layoutreturn to report the error back to the NFS metadata server. This patch ensures that the return-on-close code can detect the outstanding layoutreturn, and not preempt it. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a process reopens the file before we can send off the CLOSE/DELEGRETURN, then pnfs_roc_drain() may end up waiting for a new set of layout segments that are marked as return-on-close, but haven't yet been returned. Fix this by only waiting for those layout segments that were invalidated in pnfs_roc(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It is OK for layout segments to remain hashed even if no-one holds any references to them, provided that the segments are still valid. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
An earlier (pre-kernel-integration) refactoring of this code mistakenly replaced the error condition, <, with a >. Use < to detect an error as opposed to a successful requeue or signal race. Reported-by: David Binderman <dcb314@hotmail.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
xprt_alloc_bc_request() cannot call xprt_free_bc_request() without deadlocking, since it already holds the xprt->bc_pa_lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Fixes: 0d2a970 ("SUNRPC: Fix a backchannel race") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Calling xprt_complete_bc_request() effectively causes the slot to be allocated, so it needs to decrement the backchannel free slot count as well. Fixes: 0d2a970 ("SUNRPC: Fix a backchannel race") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Otherwise, nfs4_select_rw_stateid() will always return the zero stateid instead of the correct open stateid. Fixes: f95549c ("NFSv4: More CLOSE/OPEN races") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
pNFS writes don't return attributes, however that doesn't mean that we should ignore the fact that they may be extending the file. This patch ensures that if a write is seen to extend the file, then we always set an attribute barrier, and update the cached file size. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
… to date If we've ensured that the size and the change attribute are both correct, then there is no point in marking those attributes as needing revalidation again. Only do so if we know the size is incorrect and was not updated. Fixes: f2467b6 ("NFS: Clear NFS_INO_REVAL_PAGECACHE when...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
…ised We can't allow caching of data until the change attribute has been initialised correctly. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Setting the change attribute has been mandatory for all NFS versions, since commit 3a1556e ("NFSv2/v3: Simulate the change attribute"). We should therefore not have anything be conditional on it being set/unset. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
I'm not aware of any existing bugs around this, but the expectation is that nfs_mark_for_revalidate() should always force a revalidation of the cached metadata. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
API compliance scanning with coccinelle flagged:
./drivers/scsi/qla2xxx/tcm_qla2xxx.c:407:2-29:
WARNING: timeout is HZ dependent
This was introduced in 'commit 75f8c1f ("[SCSI] tcm_qla2xxx: Add >=
24xx series fabric module for target-core")'. wait_for_completion_timeout()
expects a timeout in jiffies so the numeric constant makes the effective
timeout HZ dependent. Resolved by converting it to CONST * HZ.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
See https://bugzilla.redhat.com/show_bug.cgi?id=1240687 Returning 0 from a configfs store function results in infinite retries. Reported-by: Yanko Kaneti <yaneti@declera.com> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Here are some more instances where we are returning 0 from a configfs store function, the unintended result of which is likely infinite retries from userspace. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
As a follow up to ce31c1b - there are still a few LIO match_int() calls that don't check the return value. Propagate errors rather than using the potentially uninitialised result. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In recent testing, a system that crashed failed log recovery on restart with a bad symlink buffer magic number: XFS (vda): Starting recovery (logdev: internal) XFS (vda): Bad symlink block magic! XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 2060 On examination of the log via xfs_logprint, none of the symlink buffers in the log had a bad magic number, nor were any other types of buffer log format headers mis-identified as symlink buffers. Tracing was used to find the buffer the kernel was tripping over, and xfs_db identified it's contents as: 000: 5841524d 00000000 00000346 64d82b48 8983e692 d71e4680 a5f49e2c b317576e 020: 00000000 00602038 00000000 006034ce d0020000 00000000 4d4d4d4d 4d4d4d4d 040: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 060: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d ..... This is a remote attribute buffer, which are notable in that they are not logged but are instead written synchronously by the remote attribute code so that they exist on disk before the attribute transactions are committed to the journal. The above remote attribute block has an invalid LSN in it - cycle 0xd002000, block 0 - which means when log recovery comes along to determine if the transaction that writes to the underlying block should be replayed, it sees a block that has a future LSN and so does not replay the buffer data in the transaction. Instead, it validates the buffer magic number and attaches the buffer verifier to it. It is this buffer magic number check that is failing in the above assert, indicating that we skipped replay due to the LSN of the underlying buffer. The problem here is that the remote attribute buffers cannot have a valid LSN placed into them, because the transaction that contains the attribute tree pointer changes and the block allocation that the attribute data is being written to hasn't yet been committed. Hence the LSN field in the attribute block is completely unwritten, thereby leaving the underlying contents of the block in the LSN field. It could have any value, and hence a future overwrite of the block by log recovery may or may not work correctly. Fix this by always writing an invalid LSN to the remote attribute block, as any buffer in log recovery that needs to write over the remote attribute should occur. We are protected from having old data written over the attribute by the fact that freeing the block before the remote attribute is written will result in the buffer being marked stale in the log and so all changes prior to the buffer stale transaction will be cancelled by log recovery. Hence it is safe to ignore the LSN in the case or synchronously written, unlogged metadata such as remote attribute blocks, and to ensure we do that correctly, we need to write an invalid LSN to all remote attribute blocks to trigger immediate recovery of metadata that is written over the top. As a further protection for filesystems that may already have remote attribute blocks with bad LSNs on disk, change the log recovery code to always trigger immediate recovery of metadata over remote attribute blocks. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
We don't log remote attribute contents, and instead write them synchronously before we commit the block allocation and attribute tree update transaction. As a result we are writing to the allocated space before the allcoation has been made permanent. As a result, we cannot consider this allocation to be a metadata allocation. Metadata allocation can take blocks from the free list and so reuse them before the transaction that freed the block is committed to disk. This behaviour is perfectly fine for journalled metadata changes as log recovery will ensure the free operation is replayed before the overwrite, but for remote attribute writes this is not the case. Hence we have to consider the remote attribute blocks to contain data and allocate accordingly. We do this by dropping the XFS_BMAPI_METADATA flag from the block allocation. This means the allocation will not use blocks that are on the busy list without first ensuring that the freeing transaction has been committed to disk and the blocks removed from the busy list. This ensures we will never overwrite a freed block without first ensuring that it is really free. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* pm-cpufreq: cpufreq: Avoid attempts to create duplicate symbolic links intel_pstate: Add get_scaling cpu_defaults param to Knights Landing * acpi-pm: ACPI / PM: Use target_state to set the device power state
Pull SCSI target fixes from Nicholas Bellinger:
"This series is larger than what I'd normally be conformable with
sending for a -rc5 PULL request..
However, the bulk of the series is localized to qla2xxx target
specific fixes that address a number of real-world correctness issues,
that have been outstanding on the list for ~6 weeks now. They where
submitted + verified + acked by the HW LLD vendor, contributed by a
major production customer of the code, and are marked for v3.18.y
stable code.
That said, I don't see a good reason to wait another month to get
these fixes into mainline.
Beyond the qla2xx specific fixes, this series also includes:
- bugfix for a long standing use-after-free in iscsi-target during
TPG shutdown + demo-mode sessions.
- bugfix for a >= v4.0 regression OOPs in iscsi-target during a
iscsi_start_kthreads() failure.
- bugfix for a >= v4.0 regression hang in iscsi-target for iser
explicit session/connection logout.
- bugfix for a iser-target bug where a early CMA REJECTED status
during login triggers a NULL pointer dereference OOPs.
- bugfixes for a handful of v4.2-rc1 specific regressions related to
the larger set of recent backend configfs attribute changes.
A big thanks to QLogic + Pure Storage for the qla2xxx target bugfixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
Documentation/target: Fix tcm_mod_builder.py build breakage
iser-target: Fix REJECT CM event use-after-free OOPs
iscsi-target: Fix iser explicit logout TX kthread leak
iscsi-target: Fix iscsit_start_kthreads failure OOPs
iscsi-target: Fix use-after-free during TPG session shutdown
qla2xxx: terminate exchange when command is aborted by LIO
qla2xxx: drop cmds/tmrs arrived while session is being deleted
qla2xxx: disable scsi_transport_fc registration in target mode
qla2xxx: added sess generations to detect RSCN update races
qla2xxx: Abort stale cmds on qla_tgt_wq when plogi arrives
qla2xxx: delay plogi/prli ack until existing sessions are deleted
qla2xxx: cleanup cmd in qla workqueue before processing TMR
qla2xxx: kill sessions/log out initiator on RSCN and port down events
qla2xxx: fix command initialization in target mode.
qla2xxx: Remove msleep in qlt_send_term_exchange
qla2xxx: adjust debug flags
qla2xxx: release request queue reservation.
qla2xxx: Add flush after updating ATIOQ consumer index.
qla2xxx: Enable target mode for ISP27XX
qla2xxx: Fix hardware lock/unlock issue causing kernel panic.
...
Pull VFIO fix from Alex Williamson: "Fix a lockdep reported deadlock in device open error path" * tag 'vfio-v4.2-rc5' of git://github.com/awilliam/linux-vfio: vfio: Fix lockdep issue
…/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two bug fixes: - fix a crash on pre-z10 hardware due to cache-info - fix an issue with classic BPF programs in the eBPF JIT" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cachinfo: add missing facility check to init_cache_level() s390/bpf: clear correct BPF accumulator register
This reverts commit 386cb7c. Taking the wake_worker() out of free_migration() will slow writeback dramatically, and hence adaptability. Say we have 10k blocks that need writing back, but are only able to issue 5 concurrently due to the migration bandwidth: it's imperative that we wake_worker() immediately after migration completion; waiting for the next 1 second wake up (via do_waker) means it'll take a long time to write that all back. Reported-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
…nting Commit 665022d ("dm cache: avoid calls to prealloc_free_structs() if possible") introduced a regression that caused the removal of a DM cache device to hang in cache_postsuspend()'s call to wait_for_migrations() with the following stack trace: [<ffffffff81651457>] schedule+0x37/0x80 [<ffffffffa041e21b>] cache_postsuspend+0xbb/0x470 [dm_cache] [<ffffffff810ba970>] ? prepare_to_wait_event+0xf0/0xf0 [<ffffffffa0006f77>] dm_table_postsuspend_targets+0x47/0x60 [dm_mod] [<ffffffffa0001eb5>] __dm_destroy+0x215/0x250 [dm_mod] [<ffffffffa0004113>] dm_destroy+0x13/0x20 [dm_mod] [<ffffffffa00098cd>] dev_remove+0x10d/0x170 [dm_mod] [<ffffffffa00097c0>] ? dev_suspend+0x240/0x240 [dm_mod] [<ffffffffa0009f85>] ctl_ioctl+0x255/0x4d0 [dm_mod] [<ffffffff8127ac00>] ? SYSC_semtimedop+0x280/0xe10 [<ffffffffa000a213>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [<ffffffff811fd432>] do_vfs_ioctl+0x2d2/0x4b0 [<ffffffff81117d5f>] ? __audit_syscall_entry+0xaf/0x100 [<ffffffff81022636>] ? do_audit_syscall_entry+0x66/0x70 [<ffffffff811fd689>] SyS_ioctl+0x79/0x90 [<ffffffff81023e58>] ? syscall_trace_leave+0xb8/0x110 [<ffffffff81654f6e>] entry_SYSCALL_64_fastpath+0x12/0x71 Fix this by accounting for the call to prealloc_data_structs() immediately _before_ the call as opposed to after. This is needed because it is possible to break out of the control loop after the call to prealloc_data_structs() but before prealloc_used was set to true. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
…el/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - fix DM thinp to consistently return -ENOSPC when out of data space - fix a logic bug in the DM cache smq policy's creation error path - revert a DM cache 4.2-rc3 change that reduced writeback efficiency - fix a hang on DM cache device destruction due to improper prealloc_used accounting introduced in 4.2-rc3 - update URL for dm-crypt wiki page * tag 'dm-4.2-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix device destroy hang due to improper prealloc_used accounting Revert "dm cache: do not wake_worker() in free_migration()" dm crypt: update wiki page URL dm cache policy smq: fix alloc_bitset check that always evaluates as false dm thin: return -ENOSPC when erroring retry list due to out of data space
…nel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix three regressions, two recent ones (cpufreq core and ACPI
device power management) and one introduced during the 4.1 cycle
(intel_pstate).
Specifics:
- Fix a recently introduced issue in the cpufreq core causing it to
attempt to create duplicate symbolic links to the policy directory
in sysfs for CPUs that are offline when the cpufreq driver is being
registered (Rafael J Wysocki)
- Fix a recently introduced problem in the ACPI device power
management core code causing it to store an incorrect value in the
device object's power.state field in some cases which in turn leads
to attempts to turn power resources off while they should still be
on going forward (Mika Westerberg)
- Fix an intel_pstate driver issue introduced during the 4.1 cycle
which leads to kernel panics on boot on Knights Landing chips due
to incomplete support for them in that driver (Lukasz Anaczkowski)"
* tag 'pm+acpi-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid attempts to create duplicate symbolic links
ACPI / PM: Use target_state to set the device power state
intel_pstate: Add get_scaling cpu_defaults param to Knights Landing
pwm attributes have well defined names, which should be used. Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> Cc: stable@vger.kernel.org #v4.1+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Writing a large value into a voltage limit attribute can result in an overflow due to an auto-conversion from unsigned long to unsigned int. Cc: Constantine Shulyupin <const@MakeLinux.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
…linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches headed for -stable. nct7802: Fix integer overflow seen when writing voltage limits nct7904: Rename pwm attributes to match hwmon ABI" * tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct7802) Fix integer overflow seen when writing voltage limits hwmon: (nct7904) Rename pwm attributes to match hwmon ABI
…/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is support for keyboards and touchpads found in 2015 editions of Macbooks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: zforce - don't overwrite the stack" Input: bcm5974 - add support for the 2015 Macbook Pro HID: apple: Add support for the 2015 Macbook Pro Input: bcm5974 - prepare for a new trackpad generation Input: synaptics - dump ext10 capabilities as well
…ux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"There are a couple of recently found, long standing remote attribute
corruption fixes caused by log recovery getting confused after a
crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to
actually use the DAX fault path on read faults.
Summary:
- remote attribute log recovery corruption fixes
- DAX page faults need to use direct mappings, not a page cache
mapping"
* tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: remote attributes need to be considered data
xfs: remote attribute headers contain an invalid LSN
xfs: call dax_fault on read page faults for DAX
dabrace
pushed a commit
that referenced
this pull request
Jun 10, 2016
The police action is using its own code to initialize tcf hash info, which makes us to forgot to initialize a->hinfo correctly. Fix this by calling the helper function tcf_hash_create() directly. This patch fixed the following crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 PGD d3c34067 PUD d3e18067 PMD 0 Oops: 0000 [#1] SMP CPU: 2 PID: 853 Comm: tc Not tainted 4.6.0+ #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d3e28040 ti: ffff8800d3f6c000 task.ti: ffff8800d3f6c000 RIP: 0010:[<ffffffff810c099f>] [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 RSP: 0000:ffff88011b203c80 EFLAGS: 00010002 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000028 RBP: ffff88011b203d40 R08: 0000000000000001 R09: 0000000000000000 R10: ffff88011b203d58 R11: ffff88011b208000 R12: 0000000000000001 R13: ffff8800d3e28040 R14: 0000000000000028 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 00000000d4be1000 CR4: 00000000000006e0 Stack: ffff8800d3e289c0 0000000000000046 000000001b203d60 ffffffff00000000 0000000000000000 ffff880000000000 0000000000000000 ffffffff00000000 ffffffff8187142c ffff88011b203ce8 ffff88011b203ce8 ffffffff8101dbfc Call Trace: <IRQ> [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff810a9604>] ? sched_clock_local+0x11/0x78 [<ffffffff810bf6a1>] ? mark_lock+0x24/0x201 [<ffffffff810c1dbd>] lock_acquire+0x120/0x1b4 [<ffffffff810c1dbd>] ? lock_acquire+0x120/0x1b4 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff81aad89f>] _raw_spin_lock_bh+0x3c/0x72 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8187142c>] __tcf_hash_release+0x77/0xd1 [<ffffffff81871a27>] tcf_action_destroy+0x49/0x7c [<ffffffff81870b1c>] tcf_exts_destroy+0x20/0x2d [<ffffffff8189273b>] u32_destroy_key+0x1b/0x4d [<ffffffff81892788>] u32_delete_key_freepf_rcu+0x1b/0x1d [<ffffffff810de3b8>] rcu_process_callbacks+0x610/0x82e [<ffffffff8189276d>] ? u32_destroy_key+0x4d/0x4d [<ffffffff81ab0bc1>] __do_softirq+0x191/0x3f4 Fixes: ddf97cc ("net_sched: add network namespace support for tc actions") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Aug 18, 2016
I got this:
================================================================================
UBSAN: Undefined behaviour in ./include/linux/log2.h:63:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 721 Comm: kworker/1:1 Not tainted 4.8.0-rc1+ #87
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Workqueue: events rht_deferred_worker
0000000000000000 ffff88011661f8d8 ffffffff82344f50 0000000041b58ab3
ffffffff84f98000 ffffffff82344ea4 ffff88011661f900 ffff88011661f8b0
0000000000000001 ffff88011661f6b8 dffffc0000000000 ffffffff867f7640
Call Trace:
[<ffffffff82344f50>] dump_stack+0xac/0xfc
[<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4
[<ffffffff8242f5b8>] ubsan_epilogue+0xd/0x8a
[<ffffffff82430c41>] __ubsan_handle_shift_out_of_bounds+0x255/0x29a
[<ffffffff824309ec>] ? __ubsan_handle_out_of_bounds+0x180/0x180
[<ffffffff84003436>] ? nl80211_req_set_reg+0x256/0x2f0
[<ffffffff812112ba>] ? print_context_stack+0x8a/0x160
[<ffffffff81200031>] ? amd_pmu_reset+0x341/0x380
[<ffffffff823af808>] rht_deferred_worker+0x1618/0x1790
[<ffffffff823af808>] ? rht_deferred_worker+0x1618/0x1790
[<ffffffff823ae1f0>] ? rhashtable_jhash2+0x370/0x370
[<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970
[<ffffffff8134c1cf>] process_one_work+0x79f/0x1970
[<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970
[<ffffffff8134ba30>] ? try_to_grab_pending+0x4c0/0x4c0
[<ffffffff8134d564>] ? worker_thread+0x1c4/0x1340
[<ffffffff8134d8ff>] worker_thread+0x55f/0x1340
[<ffffffff845e904f>] ? __schedule+0x4df/0x1d40
[<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970
[<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970
[<ffffffff813642f7>] kthread+0x237/0x390
[<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280
[<ffffffff845f8c93>] ? _raw_spin_unlock_irq+0x33/0x50
[<ffffffff845f95df>] ret_from_fork+0x1f/0x40
[<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280
================================================================================
roundup_pow_of_two() is undefined when called with an argument of 0, so
let's avoid the call and just fall back to ht->p.min_size (which should
never be smaller than HASH_MIN_SIZE).
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jan 2, 2018
…nk leaks The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3 ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d542 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Feb 7, 2018
Li Shuang reported an Oops with cls_u32 due to an use-after-free in u32_destroy_key(). The use-after-free can be triggered with: dev=lo tc qdisc add dev $dev root handle 1: htb default 10 tc filter add dev $dev parent 1: prio 5 handle 1: protocol ip u32 divisor 256 tc filter add dev $dev protocol ip parent 1: prio 5 u32 ht 800:: match ip dst\ 10.0.0.0/8 hashkey mask 0x0000ff00 at 16 link 1: tc qdisc del dev $dev root Which causes the following kasan splat: ================================================================== BUG: KASAN: use-after-free in u32_destroy_key.constprop.21+0x117/0x140 [cls_u32] Read of size 4 at addr ffff881b83dae618 by task kworker/u48:5/571 CPU: 17 PID: 571 Comm: kworker/u48:5 Not tainted 4.15.0+ #87 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 Workqueue: tc_filter_workqueue u32_delete_key_freepf_work [cls_u32] Call Trace: dump_stack+0xd6/0x182 ? dma_virt_map_sg+0x22e/0x22e print_address_description+0x73/0x290 kasan_report+0x277/0x360 ? u32_destroy_key.constprop.21+0x117/0x140 [cls_u32] u32_destroy_key.constprop.21+0x117/0x140 [cls_u32] u32_delete_key_freepf_work+0x1c/0x30 [cls_u32] process_one_work+0xae0/0x1c80 ? sched_clock+0x5/0x10 ? pwq_dec_nr_in_flight+0x3c0/0x3c0 ? _raw_spin_unlock_irq+0x29/0x40 ? trace_hardirqs_on_caller+0x381/0x570 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1e5/0x760 ? finish_task_switch+0x208/0x760 ? preempt_notifier_dec+0x20/0x20 ? __schedule+0x839/0x1ee0 ? check_noncircular+0x20/0x20 ? firmware_map_remove+0x73/0x73 ? find_held_lock+0x39/0x1c0 ? worker_thread+0x434/0x1820 ? lock_contended+0xee0/0xee0 ? lock_release+0x1100/0x1100 ? init_rescuer.part.16+0x150/0x150 ? retint_kernel+0x10/0x10 worker_thread+0x216/0x1820 ? process_one_work+0x1c80/0x1c80 ? lock_acquire+0x1a5/0x540 ? lock_downgrade+0x6b0/0x6b0 ? sched_clock+0x5/0x10 ? lock_release+0x1100/0x1100 ? compat_start_thread+0x80/0x80 ? do_raw_spin_trylock+0x190/0x190 ? _raw_spin_unlock_irq+0x29/0x40 ? trace_hardirqs_on_caller+0x381/0x570 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1e5/0x760 ? finish_task_switch+0x208/0x760 ? preempt_notifier_dec+0x20/0x20 ? __schedule+0x839/0x1ee0 ? kmem_cache_alloc_trace+0x143/0x320 ? firmware_map_remove+0x73/0x73 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1c0 ? schedule+0xf3/0x3b0 ? lock_downgrade+0x6b0/0x6b0 ? __schedule+0x1ee0/0x1ee0 ? do_wait_intr_irq+0x340/0x340 ? do_raw_spin_trylock+0x190/0x190 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? process_one_work+0x1c80/0x1c80 ? process_one_work+0x1c80/0x1c80 kthread+0x312/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 Allocated by task 1688: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x162/0x380 u32_change+0x1220/0x3c9e [cls_u32] tc_ctl_tfilter+0x1ba6/0x2f80 rtnetlink_rcv_msg+0x4f0/0x9d0 netlink_rcv_skb+0x124/0x320 netlink_unicast+0x430/0x600 netlink_sendmsg+0x8fa/0xd60 sock_sendmsg+0xb1/0xe0 ___sys_sendmsg+0x678/0x980 __sys_sendmsg+0xc4/0x210 do_syscall_64+0x232/0x7f0 return_from_SYSCALL_64+0x0/0x75 Freed by task 112: kasan_slab_free+0x71/0xc0 kfree+0x114/0x320 rcu_process_callbacks+0xc3f/0x1600 __do_softirq+0x2bf/0xc06 The buggy address belongs to the object at ffff881b83dae600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 24 bytes inside of 4096-byte region [ffff881b83dae600, ffff881b83daf600) The buggy address belongs to the page: page:ffffea006e0f6a00 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 0000000000000000 0000000000000000 0000000100070007 raw: dead000000000100 dead000000000200 ffff880187c0e600 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff881b83dae500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff881b83dae580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff881b83dae600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff881b83dae680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff881b83dae700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The problem is that the htnode is freed before the linked knodes and the latter will try to access the first at u32_destroy_key() time. This change addresses the issue using the htnode refcnt to guarantee the correct free order. While at it also add a RCU annotation, to keep sparse happy. v1 -> v2: use rtnl_derefence() instead of RCU read locks v2 -> v3: - don't check refcnt in u32_destroy_hnode() - cleaned-up u32_destroy() implementation - cleaned-up code comment v3 -> v4: - dropped unneeded comment Reported-by: Li Shuang <shuali@redhat.com> Fixes: c0d378e ("net_sched: use tcf_queue_work() in u32 filter") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Feb 27, 2018
There is no matching lock for this mutex. Git history suggests this is just a missed remnant from an earlier version of the function before this locking was moved into uverbs_free_xrcd. Originally this lock was protecting the xrcd_table_delete() ===================================== WARNING: bad unlock balance detected! 4.15.0+ #87 Not tainted ------------------------------------- syzkaller223405/269 is trying to release lock (&uverbs_dev->xrcd_tree_mutex) at: [<00000000b8703372>] ib_uverbs_close_xrcd+0x195/0x1f0 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller223405/269: #0: (&uverbs_dev->disassociate_srcu){....}, at: [<000000005af3b960>] ib_uverbs_write+0x265/0xef0 stack backtrace: CPU: 0 PID: 269 Comm: syzkaller223405 Not tainted 4.15.0+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? ib_uverbs_write+0x265/0xef0 ? console_unlock+0x502/0xbd0 ? ib_uverbs_close_xrcd+0x195/0x1f0 print_unlock_imbalance_bug+0x131/0x160 lock_release+0x59d/0x1100 ? ib_uverbs_close_xrcd+0x195/0x1f0 ? lock_acquire+0x440/0x440 ? lock_acquire+0x440/0x440 __mutex_unlock_slowpath+0x88/0x670 ? wait_for_completion+0x4c0/0x4c0 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_close_xrcd+0x195/0x1f0 ? ib_uverbs_open_xrcd+0xdd0/0xdd0 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? ib_uverbs_open_xrcd+0xdd0/0xdd0 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x358/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x4335c9 Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c790 ("IB/core: Change idr objects to use the new schema") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dabrace
pushed a commit
that referenced
this pull request
Feb 27, 2018
Avoid circular locking dependency by calling to uobj_alloc_commit() outside of xrcd_tree_mutex lock. ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #87 Not tainted ------------------------------------------------------ syzkaller401056/269 is trying to acquire lock: (&uverbs_dev->xrcd_tree_mutex){+.+.}, at: [<000000006c12d2cd>] uverbs_free_xrcd+0xd2/0x360 but task is already holding lock: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ucontext->uobjects_lock){+.+.}: __mutex_lock+0x111/0x1720 rdma_alloc_commit_uobject+0x22c/0x600 ib_uverbs_open_xrcd+0x61a/0xdd0 ib_uverbs_write+0x7f9/0xef0 __vfs_write+0x10d/0x700 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x1e/0x8b -> #0 (&uverbs_dev->xrcd_tree_mutex){+.+.}: lock_acquire+0x19d/0x440 __mutex_lock+0x111/0x1720 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); *** DEADLOCK *** 3 locks held by syzkaller401056/269: #0: (&file->cleanup_mutex){+.+.}, at: [<00000000c9f0c252>] ib_uverbs_close+0xac/0x570 #1: (&ucontext->cleanup_rwsem){++++}, at: [<00000000b6994d49>] uverbs_cleanup_ucontext+0xf6/0x730 #2: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 stack backtrace: CPU: 0 PID: 269 Comm: syzkaller401056 Not tainted 4.15.0+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? uverbs_cleanup_ucontext+0x168/0x730 ? console_unlock+0x502/0xbd0 print_circular_bug.isra.24+0x35e/0x396 ? print_circular_bug_header+0x12e/0x12e ? find_usage_backwards+0x30/0x30 ? entry_SYSCALL_64_fastpath+0x1e/0x8b validate_chain.isra.28+0x25d1/0x40c0 ? check_usage+0xb70/0xb70 ? graph_lock+0x160/0x160 ? find_usage_backwards+0x30/0x30 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? __lock_acquire+0x93d/0x1630 __lock_acquire+0x93d/0x1630 lock_acquire+0x19d/0x440 ? uverbs_free_xrcd+0xd2/0x360 __mutex_lock+0x111/0x1720 ? uverbs_free_xrcd+0xd2/0x360 ? uverbs_free_xrcd+0xd2/0x360 ? __mutex_lock+0x828/0x1720 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0x168/0x730 ? __lock_acquire+0x9a9/0x1630 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0xf6/0x730 ? lock_contended+0x11a0/0x11a0 ? uverbs_free_xrcd+0xd2/0x360 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ? sched_clock_cpu+0x18/0x200 ? uverbs_close_fd+0x1c0/0x1c0 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 ? ib_uverbs_remove_one+0xb50/0xb50 ? ib_uverbs_remove_one+0xb50/0xb50 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 ? fsnotify_first_mark+0x220/0x220 ? exit_notify+0x9f0/0x9f0 ? entry_SYSCALL_64_fastpath+0x5/0x8b ? entry_SYSCALL_64_fastpath+0x5/0x8b ? trace_hardirqs_on_thunk+0x1a/0x1c ? time_hardirqs_on+0x27/0x670 ? time_hardirqs_off+0x27/0x490 ? syscall_return_slowpath+0x6c/0x460 ? entry_SYSCALL_64_fastpath+0x5/0x8b do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x431ce9 Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c790 ("IB/core: Change idr objects to use the new schema") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dabrace
pushed a commit
that referenced
this pull request
May 4, 2018
syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(), root caused to a bad assumption of ICMP header being already pulled in skb->head ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug. BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 23aebda ("ipv6: Compute multipath hash for ICMP errors from offending packet") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
May 4, 2018
syzbot/KMSAN reported an uninit-value in put_cmsg(), originating from rds_cmsg_recv(). Simply clear the structure, since we have holes there, or since rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242 CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x600/0x870 net/core/scm.c:242 rds_cmsg_recv net/rds/recv.c:570 [inline] rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657 sock_recvmsg_nosec net/socket.c:803 [inline] sock_recvmsg+0x1d0/0x230 net/socket.c:810 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205 __sys_recvmsg net/socket.c:2250 [inline] SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262 SyS_recvmsg+0x54/0x80 net/socket.c:2257 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3289025 ("RDS: add receive message trace used by application") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: linux-rdma <linux-rdma@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
May 21, 2018
When we get link properties through netlink interface with tipc_nl_node_get_link(), we don't validate TIPC_NLA_LINK_NAME attribute at all, instead we directly use it. As a consequence, KMSAN detected the TIPC_NLA_LINK_NAME attribute was an uninitialized value, and then posted the following complaint: ================================================================== BUG: KMSAN: uninit-value in strcmp+0xf7/0x160 lib/string.c:329 CPU: 1 PID: 4527 Comm: syz-executor655 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 strcmp+0xf7/0x160 lib/string.c:329 tipc_nl_node_get_link+0x220/0x6f0 net/tipc/node.c:1881 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline] genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x445589 RSP: 002b:00007fb7ee66cdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 0000000000445589 RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffa2bf3f3f R14: 00007fb7ee66d9c0 R15: 0000000000000001 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== To quiet the complaint, TIPC_NLA_LINK_NAME attribute has been validated in tipc_nl_node_get_link() before it's used. Reported-by: syzbot+df0257c92ffd4fcc58cd@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Oct 2, 2018
pppoe_rcv() needs to look back at the Ethernet header in order to lookup the PPPoE session. Therefore we need to ensure that the mac header is big enough to contain an Ethernet header. Otherwise eth_hdr(skb)->h_source might access invalid data. ================================================================== BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline] BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline] BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 __get_item drivers/net/ppp/pppoe.c:172 [inline] get_item drivers/net/ppp/pppoe.c:236 [inline] pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4447c9 RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9 RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004 RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 tun_alloc_skb drivers/net/tun.c:1532 [inline] tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== Fixes: 224cf5a ("ppp: Move the PPP drivers") Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Oct 2, 2018
the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efa ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jan 15, 2019
cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dabrace
pushed a commit
that referenced
this pull request
Jan 21, 2019
BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335 CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335 tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline] genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fda9 RSP: 002b:00007ffd0c184ba8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fda9 RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 00000000004016d0 R13: 0000000000401760 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 In tipc_nl_compat_recv(), when the len variable returned by nlmsg_attrlen() is 0, the message is still treated as a valid one, which is obviously unresonable. When len is zero, it means the message not only doesn't contain any valid TLV payload, but also TLV header is not included. Under this stituation, tlv_type field in TLV header is still accessed in tipc_nl_compat_dumpit() or tipc_nl_compat_doit(), but the field space is obviously illegal. Of course, it is not initialized. Reported-by: syzbot+bca0dc46634781f08b38@syzkaller.appspotmail.com Reported-by: syzbot+6bdb590321a7ae40c1a6@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.