opencensus docs: migrate from README to go docs

bridge/opencensus/doc.go

@@ -13,23 +13,51 @@
 // limitations under the License.
 
 // Package opencensus provides a migration bridge from OpenCensus to
-// OpenTelemetry. The NewTracer function should be used to create an
-// OpenCensus Tracer from an OpenTelemetry Tracer. This Tracer can be use in
-// place of any existing OpenCensus Tracer and will generate OpenTelemetry
-// spans for traces. These spans will be exported by the OpenTelemetry
-// TracerProvider the original OpenTelemetry Tracer came from.
+// OpenTelemetry for metrics and traces. The bridge incorporates metrics and
+// traces from OpenCensus into the OpenTelemetry SDK, combining them with
+// metrics and traces from OpenTelemetry instrumentation.
 //
-// There are known limitations to this bridge:
+// # Migration Guide
 //
-// - The AddLink method for OpenCensus Spans is not compatible with the
-// OpenTelemetry Span. No link can be added to an OpenTelemetry Span once it
-// is started. Any calls to this method for the OpenCensus Span will result
-// in an error being sent to the OpenTelemetry default ErrorHandler.
+// For most applications, it would be difficult to migrate an application
+// from OpenCensus to OpenTelemetry all-at-once. Libraries used by the
+// application may still be using OpenCensus, and the application itself may
+// have many lines of instrumentation.
 //
-// - The NewContext method of the OpenCensus Tracer cannot embed an OpenCensus
-// Span in a context unless that Span was created by that Tracer.
+// Bridges help in this situation by allowing your application to have "mixed"
+// instrumentation, while incorporating all instrumentation into a single
+// export path. To migrate with bridges, a user would:
 //
-// - Conversion of custom OpenCensus Samplers to OpenTelemetry is not
-// implemented. An error will be sent to the OpenTelemetry default
-// ErrorHandler if this is attempted.
+//  1. Configure the OpenTelemetry SDK for metrics and traces, with the OpenTelemetry exporters matching to your current OpenCensus exporters.
+//  2. Install this OpenCensus bridge, which sends OpenCensus telemetry to your new OpenTelemetry exporters.
+//  3. Over time, migrate your instrumentation from OpenCensus to OpenTelemetry.
+//  4. Once all instrumentation is migrated, remove the OpenCensus bridge.
+//
+// With this approach, you can migrate your telemetry, including in dependent
+// libraries over time without disruption.
+//
+// # Warnings
+//
+// Installing a metric or tracing bridge will cause OpenCensus telemetry to be
+// exported by OpenTelemetry exporters. Since OpenCensus telemetry uses globals,
+// installing a bridge will result in telemetry collection from _all_ libraries
+// that use OpenCensus, including some you may not expect, such as the
+// telemetry exporter itself.
+//
+// # Limitations
+//
+// There are known limitations to the trace bridge:
+//
+//   - The AddLink method for OpenCensus Spans is ignored, and an error is sent
+//     to the OpenTelemetry ErrorHandler.
+//   - The NewContext method of the OpenCensus Tracer cannot embed an OpenCensus
+//     Span in a context unless that Span was created by that Tracer.
+//   - Conversion of custom OpenCensus Samplers to OpenTelemetry is not
+//     implemented, and An error will be sent to the OpenTelemetry ErrorHandler.
+//
+// There are known limitations to the metric bridge:
+//   - Summary-typed metrics are dropped
+//   - GaugeDistribution-typed metrics are dropped
+//   - Histogram's SumOfSquaredDeviation field is dropped
+//   - Exemplars on Histograms are dropped
 package opencensus // import "go.opentelemetry.io/otel/bridge/opencensus"

bridge/opencensus/example_test.go

@@ -0,0 +1,41 @@
+// Copyright The OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package opencensus_test
+
+import (
+	octrace "go.opencensus.io/trace"
+	"go.opentelemetry.io/otel"
+	"go.opentelemetry.io/otel/bridge/opencensus"
+	"go.opentelemetry.io/otel/sdk/metric"
+)
+
+func ExampleNewTracer() {
+	// Create an OpenTelemetry Tracer to use to record spans.
+	tracer := otel.GetTracerProvider().Tracer("go.opentelemetry.io/otel/bridge/opencensus")
+	// Overwrite the OpenCensus DefaultTracer so that it uses OpenTelemetry
+	// rather than OpenCensus.
+	octrace.DefaultTracer = opencensus.NewTracer(tracer)
+}
+
+func ExampleNewMetricProducer() {
+	// Create the OpenCensus Metric bridge.
+	bridge := opencensus.NewMetricProducer()
+	// Add the bridge to your reader using metric.WithProducer().
+	// If using a push exporter, such as OTLP, use metric.NewPeriodicReader.
+	// If using the prometheus exporter, use prometheus.WithProducer.
+	reader := metric.NewManualReader(metric.WithProducer(bridge))
+	// Add the reader to your MeterProvider.
+	_ = metric.NewMeterProvider(metric.WithReader(reader))
+}

bridge/opencensus/metric.go

@@ -18,15 +18,12 @@ import (
 	"context"
 
 	ocmetricdata "go.opencensus.io/metric/metricdata"
-	"go.opencensus.io/metric/metricexport"
 	"go.opencensus.io/metric/metricproducer"
 
-	"go.opentelemetry.io/otel"
 	internal "go.opentelemetry.io/otel/bridge/opencensus/internal/ocmetric"
 	"go.opentelemetry.io/otel/sdk/instrumentation"
 	"go.opentelemetry.io/otel/sdk/metric"
 	"go.opentelemetry.io/otel/sdk/metric/metricdata"
-	"go.opentelemetry.io/otel/sdk/resource"
 )
 
 const scopeName = "go.opentelemetry.io/otel/bridge/opencensus"
@@ -60,40 +57,3 @@ func (p *producer) Produce(context.Context) ([]metricdata.ScopeMetrics, error) {
 		Metrics: otelmetrics,
 	}}, err
 }
-
-// exporter implements the OpenCensus metric Exporter interface using an
-// OpenTelemetry base exporter.
-type exporter struct {
-	base metric.Exporter
-	res  *resource.Resource
-}
-
-// NewMetricExporter returns an OpenCensus exporter that exports to an
-// OpenTelemetry (push) exporter.
-//
-// Deprecated: Use [NewMetricProducer] instead.
-func NewMetricExporter(base metric.Exporter, res *resource.Resource) metricexport.Exporter {
-	return &exporter{base: base, res: res}
-}
-
-// ExportMetrics implements the OpenCensus metric Exporter interface by sending
-// to an OpenTelemetry exporter.
-func (e *exporter) ExportMetrics(ctx context.Context, ocmetrics []*ocmetricdata.Metric) error {
-	otelmetrics, err := internal.ConvertMetrics(ocmetrics)
-	if err != nil {
-		otel.Handle(err)
-	}
-	if len(otelmetrics) == 0 {
-		return nil
-	}
-	return e.base.Export(ctx, &metricdata.ResourceMetrics{
-		Resource: e.res,
-		ScopeMetrics: []metricdata.ScopeMetrics{
-			{
-				Scope: instrumentation.Scope{
-					Name: scopeName,
-				},
-				Metrics: otelmetrics,
-			},
-		}})
-}