Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add warning emoji and formatting to README #115

Merged
merged 1 commit into from
Feb 14, 2021
Merged

Add warning emoji and formatting to README #115

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
8 changes: 4 additions & 4 deletions README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -74,16 +74,16 @@ I provided three different precompiled hex files: One for no modifications on th

- Flash the hex with Cura, OctoPrint or similar
- Use a tool with a terminal (OctoPrint, Pronterface, Repetier Host, ...) to send commands to your printer.
- **Important** Connect to the printer and send the following commands:
- `M502` - load hard coded default values
- `M500` - save them to EEPROM
- ⚠️ **Important** Connect to the printer and send the following commands:
- `M502` - load hard coded default values
- `M500` - save them to EEPROM

**If you are using this on a Mega-S, those four additional commands are necessary:**
- `M92 E384` - set correct steps for the new extruder
- `M203 E30` - limit extruder feedrate
- `M204 R1500.00` - lower retract acceleration
- `M500` - save the values
- I highly recommend calibrating the extruder.
- It is highly recommend that you calibrate the extruder.

#### Calibration and other instructions have been moved to the [Wiki](https://github.com/davidramiro/Marlin-AI3M/wiki/Calibration).

Expand Down