A core lightning plugin to show a summary of your channels and optionally recent forwards, payments and/or paid invoices.
For general plugin installation instructions see the plugins repo README.md
Release binaries for
- x86_64-linux
- armv7-linux (Raspberry Pi 32bit)
- aarch64-linux (Raspberry Pi 64bit)
can be found on the release page. If you are unsure about your architecture you can run uname -m
.
They require glibc>=2.31
, which you can check with ldd --version
.
You can build the plugin yourself instead of using the release binaries. First clone the repo:
git clone https://github.com/daywalker90/summars.git
Install a recent rust version (rustup is recommended) and in the summars
folder run:
cargo build --release
After that the binary will be here: target/release/summars
Note: Release binaries are built using cross
and the optimized
profile.
There are currently two commands:
summars
the main commandsummars-refreshalias
to manually refresh the alias cache
lightning-cli summars summars-forwards=200 summars-pays=3 summars-invoices=3
address=03da2efc78ba5420048e636e541e3b484d3e314e2fca7672c0450214f7a9f2fd2e@189.78.23.211:9735
num_utxos=11
utxo_amount=0.125046909 BTC
num_channels=13
num_connected=12
num_gossipers=2
avail_out=0.05614095 BTC
avail_in=0.09208059 BTC
fees_collected=0.00001555 BTC
channels_flags=P:private O:offline
OUT_SATS | IN_SATS | SCID | MAX_HTLC | FLAG | BASE | PPM | ALIAS | PEER_ID | UPTIME | HTLCS | STATE
-----------+------------+---------------+------------+------+------+-------+----------------------+--------------------------------------------------------------------+--------+-------+-------
103,313 | 96,686 | 2471854x37x7 | 51,000 | [__] | 0 | 1 | node204.fra.memp[..] | 039c14fdec2d958e3d14cebf657451bbd9e039196615785e82c917f274e3fb2205 | 100% | 0 | OK
84,313 | 115,686 | 2471854x37x9 | 51,000 | [_O] | 0 | 1 | node205.fra.memp[..] | 033589bbcb233ffc416cefd5437c7f37e9d7cb7942d405e39e72c4c846d9b37f18 | 81% | 0 | OK
172,977 | 27,022 | 2471854x37x10 | 51,000 | [__] | 0 | 1 | OLYMPUS by ZEUS | 03e84a109cd70e57864274932fc87c5e6434c59ebb8e6e7d28532219ba38f7f6df | 100% | 0 | OK
194,978 | 5,021 | 2471854x37x12 | 51,000 | [__] | 0 | 1 | 1ML.com node ALPHA | 02312627fdf07fbdd7e5ddb136611bdde9b00d26821d14d94891395452f67af248 | 100% | 0 | OK
10,147 | 189,852 | 2471854x37x13 | 1 | [P_] | 0 | 1 | cyclopes | 028ec70462207b57e3d4d9332d9e0aee676c92d89b7c9fb0850fc2a24814d4d83c | 100% | 0 | OK
13,947 | 186,052 | 2471854x37x14 | 1 | [__] | 0 | 1 | 030f375d8aecdddc8523 | 030f375d8aecdddc852309c15c3b67c2934de0de4d31e1e04a03d656ca0a78d008 | 100% | 0 | OK
127,035 | 873,964 | 2476625x46x0 | 51,000 | [__] | 0 | 1,849 | lndus1.next.zaphq.io | 022251a9fa007cd60acee9cbc6ab4b15d2ad52cad5f271b0276d3b2d97e3d87b43 | 87% | 0 | OK
48,836 | 952,163 | 2476625x46x1 | 1 | [__] | 0 | 1,849 | lndus0.next.zaphq.io | 028c3640c57ffe47eb41db8225968833c5032f297aeba98672d6f7037090d59e3f | 86% | 0 | OK
380,431 | 620,568 | 2476625x46x2 | 51,000 | [__] | 0 | 1 | Bitnob(Jos, 2001) | 035c32eded21dd4a073153c4e3c1e56618f1f77b8edb66653a0a643f7a78260117 | 99% | 0 | OK
375,512 | 625,487 | 2476625x46x3 | 990,990 | [__] | 0 | 1 | lndus0.dev.zaphq.io | 03819f6e407d3890484bed25b56b2ca582a883a4aa5671965462f591732381b358 | 100% | 0 | OK
253,922 | 747,077 | 2476625x46x4 | 990,990 | [__] | 0 | 1 | lndus1.dev.zaphq.io | 02be8f360e57600486b93dd33ea0872a4e14a259924ba4084f27d693a77d151158 | 100% | 0 | OK
26,738 | 1,819,119 | 2476654x19x0 | 1 | [__] | 0 | 1 | Boltz | 03f060953bef5b777dc77e44afa3859d022fc1a77c55138deb232ad7255e869c00 | 100% | 0 | OK
49,714 | 951,285 | 2501790x6x4 | 1 | [__] | 0 | 1 | endurance | 03933884aaf1d6b108397e5efe5c86bcf2d8ca8d2f700eda99db9214fc2712b134 | 100% | 0 | OK
forwards
resolved_time in_channel out_channel in_sats out_sats fee_msats
5/16/24, 3:48:58 PM lndus1.next.zaphq.io 02758997f184be06f435 11,503 11,503 11
pays
completed_at payment_hash sats_sent fee_msats destination
5/19/24, 5:34:58 PM 19483c34259aa832a6bb805b72bc02db89d639975608adf4371d8ff4eda8be99 50,000 0 Boltz
5/19/24, 5:34:59 PM 175168a906829f668d712786604bc1db04358f02fcf37563afb58402a7cb9282 50,000 0 Boltz
5/19/24, 5:35:01 PM ad6491728f6a120980f14a5eb5688b7406ec2563525af812b911a39649da3f09 50,000 0 Boltz
5/19/24, 5:35:02 PM d2ca9282a0a546b01b6ff5ecc71a313cbe0c2f0ac084b9075c203078f8dbaa71 50,000 0 Boltz
5/19/24, 5:35:03 PM 71ce7cabc80f55b51dd9373f2ea57acaa21b9087e993ebfad3b4302dc46a943b 50,000 0 Boltz
5/19/24, 5:35:04 PM cbd929f8a0bc4bc46dba51b0dc3188662708d1bd8e6ae5ee71ccd894194d40db 50,000 0 Boltz
invoices
paid_at label sats_received payment_hash
5/19/24, 5:35:21 PM WpcvbXKW 50,000 39eb0fa161fb85ab7c653bdfb49da8ca4914287b2ecd567968a3c4156c285768
5/19/24, 5:35:22 PM TQCankEM 50,000 432c37e7bfae40df087e2e8a3c4590d3cd7011ebf56760dee8edfea3b8281e0e
5/19/24, 5:35:23 PM HgGRjkrs 50,000 3568ebd9431ec2cf17528ba4e7a144aca62f9606f7766a33afd41ef30c50700c
5/19/24, 5:35:25 PM 82ac9e392f2dd41f4d53ff9ebe[..] 50,000 623743a48f5d0a8f20b9605228b4da0be7bd2cd72f7da39ec0028bf953317785
5/19/24, 5:35:26 PM 82ac9e392f2dd41f4d53ff9ebe[..] 50,000 be5fe3a6fff1efe77362186f357414f69d6d43e26f35af6233135fb2fcac06e3
5/19/24, 5:35:27 PM 82ac9e392f2dd41f4d53ff9ebe[..] 50,000 7ad2e0bb16ecc6f3f893c9f626cdb85802aa27c0ff00d24bce32e28dbebb32ab
lightning-cli summars summars-columns=GRAPH_SATS,SCID summars-style=empty summars-sort-by=IN_SATS
address=03da2efc781a5420088e636e342e3b484d3e514e1fca7672c0450515f7a9f2fd6e@129.38.53.21:9735
num_utxos=5
utxo_amount=0.25046909 BTC
num_channels=5
num_connected=5
num_gossipers=1
avail_out=0.15614095 BTC
avail_in=0.49208059 BTC
fees_collected=0.00103555 BTC
channels_flags=P:private O:offline
├0.16777060 OUT GRAPH_SATS IN 0.16777060┤ SCID
╟─┤ 2472654x19x0
├───────────┼──────────┤ 2534335x3x0
├─────────┼────────────┤ 2536331x16x0
├────┼─────────────────┤ 2531339x15x0
╟──────────────────────┤ 2576452x228x0
summars
is a dynamic plugin with dynamic options, so you can start it after CLN is already running and modify it's options after the plugin is started. There are three different methods of setting the options:
- Running the
summars
command. This only sets the options temporarily for this one execution ofsummars
and there are some exceptions for options that don't make sense here.
- Example:
lightning-cli summars summars-forwards=6
- When starting the plugin dynamically.
- Example:
lightning-cli -k plugin subcommand=start plugin=/path/to/summars summars-forwards=6
- Permanently saving them in the CLN config file.
⚠️ If you want to do this while CLN is running you must use setconfig instead of manually editing your config file!⚠️ If you have options in the config file (either by manually editing it or by using thesetconfig
command) make sure the plugin will start automatically with CLN (includeplugin=/path/to/summars
or have a symlink tosummars
in yourplugins
folder). This is because CLN will refuse to start with config options that don't have a corresponding plugin loaded.⚠️ If you edit your config file manually while CLN is running and a line changes their line number CLN will crash when you use the setconfig command, so better stick tosetconfig
only during CLN's uptime!
- Example:
lightning-cli setconfig summars-forwards 6
You can mix these methods and if you set the same option with different methods, it will pick the value from your most recently used method.
summars-columns
Comma-separated list of enabled columns in the channel table. Also dictates order of columns. Valid columns:GRAPH_SATS
,PERC_US
,OUT_SATS
,IN_SATS
,TOTAL_SATS
,SCID
,MIN_HTLC
,MAX_HTLC
,FLAG
,BASE
,IN_BASE
,PPM
,IN_PPM
,ALIAS
,PEER_ID
,UPTIME
,HTLCS
,STATE
. Default columns:OUT_SATS
,IN_SATS
,SCID
,MAX_HTLC
,FLAG
,BASE
,PPM
,ALIAS
,PEER_ID
,UPTIME
,HTLCS
,STATE
summars-sort-by
Sort by column name. Use-
before column name to reverse sort. Valid columns are allsummars-columns
except forGRAPH_SATS
. Default isSCID
summars-exclude-states
List if excluded channel states. Comma-separated. Valid states are:OPENING
,AWAIT_LOCK
,OK
,SHUTTING_DOWN
,CLOSINGD_SIGEX
,CLOSINGD_DONE
,AWAIT_UNILATERAL
,FUNDING_SPEND
,ONCHAIN
,DUAL_OPEN
,DUAL_COMITTED
,DUAL_COMMIT_RDY
,DUAL_AWAIT
,AWAIT_SPLICE
andPUBLIC
,PRIVATE
to filter channels by their network visibility, aswell as orONLINE,OFFLINE
to filter by connection status.
summars-forwards
List successfull forwards of the last x hours. Default is0
hours (disabled)summars-forwards-limit
Additionally limit the amount of entries shown bysummars-forwards
. Default is0
(off)summars-forwards-columns
Comma-separated list of enabled columns in the forwards table. Also dictates order of columns. Valid columns:received_time
,resolved_time
,in_channel
,out_channel
,in_sats
,in_msats
,out_sats
,out_msats
,fee_sats
,fee_msats
,eff_fee_ppm
. Default columns:resolved_time
,in_channel
,out_channel
,in_sats
,out_sats
,fee_msats
summars-forwards-filter-amount-msat
Filter forwards where in amount is smaller than or equal to x msat and show a summary of those forwards instead. Default is-1
(disabled)summars-forwards-filter-fee-msat
Filter forwards where fee amount is smaller than or equal to x msat and show a summary of those forwards instead. Default is-1
(disabled)summars-forwards-alias
In the forwards list show aliases insted of scid's. Default istrue
summars-pays
List successfull payments of the last x hours. Default is0
hours (disabled)summars-pays-limit
Additionally limit the amount of entries shown bysummars-pays
. Default is0
(off)summars-pays-columns
Comma-separated list of enabled columns in the pays table. Also dictates order of columns. Valid columns:completed_at
,payment_hash
,sats_requested
,msats_requested
,sats_sent
,msats_sent
,fee_sats
,fee_msats
,destination
,description
,preimage
. Default columns are:completed_at
,payment_hash
,sats_sent
,fee_sats
,destination
⚠️ If you enable thedescription
field in most cases an extra RPC call is necessary for each displayed payment. This could slow down the response time ofsummars
if you have alot of payments in your configured time window.
summars-invoices
List successfully paid invoices of the last x hours. Default is0
hours (disabled)summars-invoices-limit
Additionally limit the amount of entries shown bysummars-invoices
. Default is0
(off)summars-invoices-columns
Comma-separated list of enabled columns in the invoices table. Also dictates order of columns. Valid columns:paid_at
,label
,description
,sats_received
,msats_received
,payment_hash
,preimage
. Default columns are:paid_at
,label
,sats_received
,payment_hash
summars-invoices-filter-amount-msat
Filter invoices where received amount is smaller than or equal to x msat and show a summary of those invoices instead. Default is-1
(disabled)
summars-refresh-alias
How many hours between refreshing the node aliases in memory. Default is24
hourssummars-availability-interval
How often the availability should be calculated. Default is300
secondssummars-availability-window
How many hours the availability should be averaged over. Default is72
hours
summars-locale
Set locale for number and date formatting. Default is the systems locale withen-US
as fallback, if it could not be detected.summars-utf8
Switch on/off special characters in node aliases. Off replaces special characters with a?
. Default istrue
(on)summars-style
Set the table style for the summary table. Valid values are:ascii
,modern
,sharp
,rounded
,extended
,psql
,markdown
,re_structured_text
,dots
,ascii_rounded
,blank
,empty
. You can see previews here: tabled-styles. Default ismodern
summars-flow-style
Same assummars-style
but for the "flow" tables (forwards/pays/invoices). Default isblank
summars-max-alias-length
How long aliases are allowed to be before they get cut off. If you use a negative value (e.g.-20
) it will use wrapping at that length instead. Default is20
summars-max-description-length
How long descriptions are allowed to be before they get cut off. If you use a negative value (e.g.-30
) it will use wrapping at that length instead. Default is30
summars-max-label-length
How long invoice labels are allowed to be before they get cut off. If you use a negative value (e.g.-30
) it will use wrapping at that length instead. Default is30
summars-json
Set output to json format. Default isfalse
The availability is persistent through plugin restarts.
The db is located in your lightning folder in the summars
folder (e.g. .lightning/bitcoin/summars/availdb.json
).
If you want to reset these stats stop the plugin and then remove the file.
Thank you to cdecker for helping me get into writing a plugin with cln-plugin
, the people in https://t.me/lightningd and the authors of the original summary plugin.