Library and Arduino firmware to control Arduino powered RGB lights!
First import it with import ioled_lib. Then use ioled_lib.LedStrip(IP, PORT) to create the connection with the controller module.
color(r, g, b): set the RGB color used until it's changed by another color call.
brightness(br): set the Brightness (0.00-1.00) used until it's changed by another brightness call.
addLed(led_n): add the LED (position in strip) with the previously set color/brightness.
addRange(led_s, led_f): add a range of LED (initial and end position in strip) with the previously set color/brightness.
The send(): send the packet to the controller board.
Usage example:
import ioled_lib
strip = ioled_lib.LedStrip("192.168.1.111", 2712)
strip.color(255, 0, 0).addRange(0, 12).send()