Remotes/origin/hwe 6.1 #9
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 9b45980 ] btf_datasec_resolve contains a bug that causes the following BTF to fail loading: [1] DATASEC a size=2 vlen=2 type_id=4 offset=0 size=1 type_id=7 offset=1 size=1 [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [3] PTR (anon) type_id=2 [4] VAR a type_id=3 linkage=0 [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [6] TYPEDEF td type_id=5 [7] VAR b type_id=6 linkage=0 This error message is printed during btf_check_all_types: [1] DATASEC a size=2 vlen=2 type_id=7 offset=1 size=1 Invalid type By tracing btf_*_resolve we can pinpoint the problem: btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0 btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0 btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22 The last invocation of btf_datasec_resolve should invoke btf_var_resolve by means of env_stack_push, instead it returns EINVAL. The reason is that env_stack_push is never executed for the second VAR. if (!env_type_is_resolve_sink(env, var_type) && !env_type_is_resolved(env, var_type_id)) { env_stack_set_next_member(env, i + 1); return env_stack_push(env, var_type, var_type_id); } env_type_is_resolve_sink() changes its behaviour based on resolve_mode. For RESOLVE_PTR, we can simplify the if condition to the following: (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved() Since we're dealing with a VAR the clause evaluates to false. This is not sufficient to trigger the bug however. The log output and EINVAL are only generated if btf_type_id_size() fails. if (!btf_type_id_size(btf, &type_id, &type_size)) { btf_verifier_log_vsi(env, v->t, vsi, "Invalid type"); return -EINVAL; } Most types are sized, so for example a VAR referring to an INT is not a problem. The bug is only triggered if a VAR points at a modifier. Since we skipped btf_var_resolve that modifier was also never resolved, which means that btf_resolved_type_id returns 0 aka VOID for the modifier. This in turn causes btf_type_id_size to return NULL, triggering EINVAL. To summarise, the following conditions are necessary: - VAR pointing at PTR, STRUCT, UNION or ARRAY - Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or TYPE_TAG The fix is to reset resolve_mode to RESOLVE_TBD before attempting to resolve a VAR from a DATASEC. Fixes: 1dc9285 ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58aac3a ] Currently link up can't be detected in forced mode if polling isn't used. Only link up interrupt source we have is aneg complete which isn't applicable in forced mode. Therefore we have to use energy-on as link up indicator. Fixes: 7365494 ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 193250a ] Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c0384 ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e539a10 ] Adrien reports that incorrect data is transmitted when a single page straddles multiple records. We would transmit the same data in all iterations of the loop. Reported-by: Adrien Moulin <amoulin@corp.free.fr> Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr Fixes: c1318b3 ("tls: Add opt-in zerocopy mode of sendfile()") Tested-by: Adrien Moulin <amoulin@corp.free.fr> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfa6591 ] The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF) is reserved for deleted LDs. However, in some cases, firmware was assigning LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the wrong disk as deleted. This in turn caused the wrong disk device to be taken offline by the SCSI midlayer. To address this issue, limit the LD ID range from 255 to 240. This ensures the deleted LD ID is properly identified and removed by the driver without accidently deleting any valid LDs. Fixes: ae6874b ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 288b327 ] When the sd driver revalidates host-managed SMR disks, it calls disk_set_zoned() which changes the zone_write_granularity attribute value to the logical block size regardless of the device type. After that, the sd driver overwrites the value in sd_zbc_read_zone() with the physical block size, since ZBC/ZAC requires this for host-managed disks. Between the calls to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the attribute shows the logical block size as the zone_write_granularity value, which is wrong for host-managed disks. The duration of the window is from 20ms to 200ms, depending on report zone command execution time. To avoid the wrong zone_write_granularity value between disk_set_zoned() and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but just after disk_set_zoned() call. Fixes: a805a4f ("block: introduce zone_write_granularity limit") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77737b ] Customers using GKE 1.25 and 1.26 are facing conntrack issues root caused to commit c9c3b68 ("netfilter: conntrack: make max chain length random"). Even if we assume Uniform Hashing, a bucket often reachs 8 chained items while the load factor of the hash table is smaller than 0.5 With a limit of 16, we reach load factors of 3. With a limit of 32, we reach load factors of 11. With a limit of 40, we reach load factors of 15. With a limit of 50, we reach load factors of 24. This patch changes MIN_CHAINLEN to 50, to minimize risks. Ideally, we could in the future add a cushion based on expected load factor (2 * nf_conntrack_max / nf_conntrack_buckets), because some setups might expect unusual values. Fixes: c9c3b68 ("netfilter: conntrack: make max chain length random") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f5eb3 ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". For NVSW_SN2201, select REGMAP_I2C instead of depending on it. Fixes: c6acad6 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: 5ec4a8a ("platform/mellanox: Introduce support for Mellanox register access driver") Fixes: 62f9529 ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Fixes: 662f248 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Michael Shych <michaelsh@nvidia.com> Cc: Mark Gross <markgross@kernel.org> Cc: Vadim Pasternak <vadimp@nvidia.com> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e7e154 ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: ef0f622 ("platform/x86: mlx-platform: Add physical bus number auto detection") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428913b ] If disk_scan_partitions() is called with 'FMODE_EXCL', blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow blkdev_put() is still called with 'FMODE_EXCL', which will cause 'bd_holders' counter to leak. Fix the problem by using the right mode for blkdev_put(). Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/ Tested-by: Julian Ruess <julianr@linux.ibm.com> Fixes: e5cfefa ("block: fix scan partition for exclusively open device again") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd9a2e1 ] Flole observes this WARNING on occasion: [1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0 Reported-by: <flole@flole.de> Suggested-by: Jan Kara <jack@suse.cz> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123 Fixes: 73da852 ("nfsd: use vfs_iter_read/write") Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fef3f92 ] When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd7 ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f5c5a7 ] With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 3480017 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce7ca79 ] Before determining whether the msg has unsupported options, it has been prematurely terminated by the wrong status check. For the application, the general usages of MSG_FASTOPEN likes fd = socket(...) /* rather than connect */ sendto(fd, data, len, MSG_FASTOPEN) Hence, We need to check the flag before state check, because the sock state here is always SMC_INIT when applications tries MSG_FASTOPEN. Once we found unsupported options, fallback it to TCP. Fixes: ee9dfbe ("net/smc: handle sockopts forcing fallback") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> v2 -> v1: Optimize code style Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
…ault detection [ Upstream commit ea9dd2e ] NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581c ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ca6705 ] Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up. Fixes: ed6473d ("NFSv4: Fix callback server shutdown") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8b8a3c ] The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4fa ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6 ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e07 ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aab4b9 ] syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 314001f ("af_unix: Add OOB support") Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rao Shoaib <rao.shoaib@oracle.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230307164530.771896-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 647dd2c ] Let's revert commit 12724ba ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit a421ef3 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So the original fix was wrong. Actually there was some issue as [1] discussed, so before that mm fix is landed, the warn could still happen but applying this commit first will cause less. [1] https://lore.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com Fixes: 12724ba ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL") Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7695034 ] When CONFIG_FRAME_POINTER is unset, the stack unwinding function walk_stackframe randomly reads the stack and then, when KASAN is enabled, it can lead to the following backtrace: [ 0.000000] ================================================================== [ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a [ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f deepin-community#43 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36 [ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8 [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8 [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84 [ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6 [ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76 [ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e [ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52 [ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84 [ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6 [ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20 [ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a [ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c [ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e [ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe [ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) 'c' [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise mode. Fixes: 5d8544e ("RISC-V: Generic library routines and assembly") Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com> Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/ Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a8db5e ] We're currently using stop_machine() to update ftrace & kprobes, which means that the thread that takes text_mutex during may not be the same as the thread that eventually patches the code. This isn't actually a race because the lock is still held (preventing any other concurrent accesses) and there is only one thread running during stop_machine(), but it does trigger a lockdep failure. This patch just elides the lockdep check during stop_machine. Fixes: c15ac4f ("riscv/ftrace: Add dynamic function tracer support") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20534db ] This patch fixes a return value check in kfd doorbell handling. This function should return 0(error) only when the ida_simple_get returns < 0(error), return > 0 is a success case. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: 16f0013 ("drm/amdkfd: Allocate doorbells only when needed") Acked-by: Christian Koenig <chriatian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c92792 ] As lockdep properly warns, we should not be locking i_rwsem while having transactions started as the proper lock ordering used by all directory handling operations is i_rwsem -> transaction start. Fix the lock ordering by moving the locking of the directory earlier in ext4_rename(). Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com Fixes: 0813299 ("ext4: Fix possible corruption when moving a directory") Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574 Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ce2ea0 ] Added the video capability query support for VCN version 4_0_4 Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e752e54 ] During kexec on ARM device, we notice that device_shutdown() only calls pm_runtime_force_suspend() while shutting down the GPU. This means the GPU kthread is still running and further, there maybe active submits. This causes all kinds of issues during a kexec reboot: Warning from shutdown path: [ 292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44 [ 292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 292.509881] pc : adreno_runtime_suspend+0x3c/0x44 [ 292.509891] lr : pm_generic_runtime_suspend+0x30/0x44 [ 292.509905] sp : ffffffc014473bf0 [...] [ 292.510043] Call trace: [ 292.510051] adreno_runtime_suspend+0x3c/0x44 [ 292.510061] pm_generic_runtime_suspend+0x30/0x44 [ 292.510071] pm_runtime_force_suspend+0x54/0xc8 [ 292.510081] adreno_shutdown+0x1c/0x28 [ 292.510090] platform_shutdown+0x2c/0x38 [ 292.510104] device_shutdown+0x158/0x210 [ 292.510119] kernel_restart_prepare+0x40/0x4c And here from GPU kthread, an SError OOPs: [ 192.648789] el1h_64_error+0x7c/0x80 [ 192.648812] el1_interrupt+0x20/0x58 [ 192.648833] el1h_64_irq_handler+0x18/0x24 [ 192.648854] el1h_64_irq+0x7c/0x80 [ 192.648873] local_daif_inherit+0x10/0x18 [ 192.648900] el1h_64_sync_handler+0x48/0xb4 [ 192.648921] el1h_64_sync+0x7c/0x80 [ 192.648941] a6xx_gmu_set_oob+0xbc/0x1fc [ 192.648968] a6xx_hw_init+0x44/0xe38 [ 192.648991] msm_gpu_hw_init+0x48/0x80 [ 192.649013] msm_gpu_submit+0x5c/0x1a8 [ 192.649034] msm_job_run+0xb0/0x11c [ 192.649058] drm_sched_main+0x170/0x434 [ 192.649086] kthread+0x134/0x300 [ 192.649114] ret_from_fork+0x10/0x20 Fix by calling adreno_system_suspend() in the device_shutdown() path. [ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also tested as above. ] Cc: Rob Clark <robdclark@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ricardo Ribalda <ribalda@chromium.org> Cc: Ross Zwisler <zwisler@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/517633/ Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org Signed-off-by: Rob Clark <robdclark@chromium.org> Stable-dep-of: 6153c44 ("drm/msm/adreno: fix runtime PM imbalance at unbind") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6153c44 ] A recent commit moved enabling of runtime PM from adreno_gpu_init() to adreno_load_gpu() (called on first open()), which means that unbind() may now be called with runtime PM disabled in case the device was never opened in between. Make sure to only forcibly suspend and disable runtime PM at unbind() in case runtime PM has been enabled to prevent a disable count imbalance. This specifically avoids leaving runtime PM disabled when the device is later opened after a successful bind: msm_dpu ae01000.display-controller: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13 Fixes: 4b18299 ("drm/msm/adreno: Defer enabling runpm until hw_init()") Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/lkml/20230203181245.3523937-1-quic_bjorande@quicinc.com Cc: stable@vger.kernel.org # 6.0 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/523549/ Link: https://lore.kernel.org/r/20230221101430.14546-2-johan+linaro@kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e1d60 ] The watch_queue_set_size() allocation error paths return the ret value set via the prior pipe_resize_ring() call, which will always be zero. As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch" fail to detect kernel wqueue->notes allocation failures and proceed to KEYCTL_WATCH_KEY, with any notifications subsequently lost. Fixes: c73be61 ("pipe: Add general notification queue support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80a6c21 ] tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a ("tpm: Fix handling of missing event log") Tested-by: Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by: Morten Linderud <morten@linderud.pw> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 109d587 ] arch/mips/include/asm/mach-rc32434/pci.h:377: cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=] All bits in KORINA_STAT are already at the correct position, so there is no addtional shift needed. Signed-off-by: xurui <xurui@kylinos.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
init hwe 6.1